REPAIR/MAINT OF B/R WORKS AT ILP-II, ALBERT EKKA ENCLAVE AND ADJACENT AREA IN AOR OF AGE B/R-I

Amount

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sq. m each complete all as specified and directed by Engineer-in-Charge

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sq.m and n.exc 2 sq. m each complete all as specified and directed by Engineer-in-Charge

Taking down the wooden shutter/window/ iron gate and refixing in position after welding (exc 6mm but n exc 9mm) in repairs exc 1 sqm but n.exc 2 sq in length complete all as specified and directed.

Taking down chowkhat or frame with shutters n.exe 1.50 Sqm (without taking of shutter from frame ) each complete all as specified and directed.

Taking down chowkhat or frame with shutters exe 1.50 Sqm and not 4 sqm (without taking of shutter from frame) each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as spd and directed.

Taking down shutters of any description n.exc 1 sqm each complete all as spd and directed.

Taking down shutters of any description n.exc 1 sqm each and refixing in same opening after easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws complete all as spd and directed.;

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each and refixing in same opening after easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screwscomplete all as spd and directed.

M&L for chowkhat 2nd class hard wood plain, solid, straight, chowkhats and and frames wrought, framed rebated on the solid rounded or chamfered, put together with gluepinned at joints complete all as specified and directed by Engr-In-Charge.

S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, concreting in PCC 1:3:6, etc., complete, as specified, supplied and fixed complete all as specified and directed.

S&F 30 mm thick factory made Flush shutters, solid core construction,with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hardwood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specifiedd and directed by Engr-in-Charge .

S&F Factory made single extruded WPC (Wood polymer composite) solid door/window and others frames/chowkhat of size 50x125 mm double shutter comprising of virgin PVC polymer of K value 58-60 (Suspension Grade ), calcium carbonate and natural fibres and non toxic additives fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750kg/cum and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-charge.

S&F Factory made single extruded WPC (Wood polymer composite) solid Plain flush door shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60 (Suspension Grade ), calcium carbonate and natural fibres and non toxic additives having minimum density of 650kg/cum and with property of being termite/borerproof,water/moisture proof and fire retardent and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete as per direction of Engr-in-charge.

S&F in repair for mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned stacks or galvanised wire staples, complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned stacks or galvanised wire staples, complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F stainless steel Butt hinges100mm (ISI marked) long medium weight, cold rolled complete all as specified and directed.

S&F 75mm long butt hinges (ISI marked), extruded alluminium alloy/stain less steel with galvanised mild steel hinge pin, anodised and fixed , type C-21 complete all as specified and directed.

S&F aluminium anodised 150 mm barrel tower bolts of extruded section.

S&F aluminium anodised 75 mm barrel tower bolts of extruded section.

S&F 150 mm long aluminium alloy handles,fabricated type, anodised.

S&F 75 mm long aluminium alloy handles,fabricated type, anodised.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and dirceted.

S&F in repair for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and dirceted.

S&F in repair for 300 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass boltsand fixed complete all as specified and directed.

S & F in repair 75 mm long hasp and staple, aluminium anodized with bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F for 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply and fixing in repair of PVC Mirror cabinet ,size 330x430 mm single door with mirror colour white complete all as specified and directed make as given inlist of makes as directed by Engineer-in-charge

M & L for aluminium snake guard fixed in aluminium doors complete all as spd and directed

Dismantling wooden boarding, any description, fixed in any position with nails.

S&F 18/19 mm thick, lead free PVC board Superior quality of density not less than 0.55 g/cm3 as in moduler shutters/cabimet drawer cupboard cabinet shutter including all frame work as specified and directed by Engr-in-Charge.

S&F Auto Closing Clip-on Soft Close Hinges with Mounting Plate (Eccentric) (L Bihari ). Make ; Hettich/Ozone/Godrej

S&F magnetic catches with ferrite magnet. Make ; Hettich/Ozone/Godrej

S&F in repairs soft close telescopic channel of size 550mm suitable for load capacity of 35 Kg. Make ; Hettich/Ozone/Godrej

S&F Stainless Steel Pull Handles (SS Grade-304) 200mm long H type, 22mm dia. Make ; Hettich/Ozone/Godrej

S&F 18/19 mm thick, prelaminated PVC moulded solid shelves and drawers boxes fitted under cooking platform and other platfors including 2 Nos telescopic channel, 1 No handles (50mm to 65mm) and fixing as specxified and directed by Engineer-in-Charge

Supply and fixing in repair stainless steel butt hinges/handle for cupboards or wardrobe complete all as specified and directed.

S&F in repair harrison curtain rails, mild steel, chromium plated with conical end balls suitable for fixing as end of curtain/dropery rods complete all as spd and directed.

All as per item No 43 here-in-before but of anodised aluminium alloy.

S&F in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as spd and directed .

Repair to steel windows area exc 1 sqm but n.exc 2 sqm etc, replacing its faulty parts to bring its functional conditions complete all as directed by Engr-in-Charge (Note: Cost of spare parts upto Rs 200/- deemed to be included in quoted rates).

Repairing aluminium doors/windows area exc 1 sqm but n.exc 2 sqm etc, replacing its faulty parts to bring its functional conditions complete all as directed by Engr-in-Charge (Note: Cost of spare parts upto Rs 250/- deem to be included in quoted rates).

S&F in repair stainless steel kitchen plate rack made out of 0.65mm thick of approved make with plugs, washers, over all size 786mmx610mmx254mm of make Prayag Cat No P-440 complete all as directed.

S&F in repair steel window handles (fixed with bolt for left or right side, or to be fixed by welding as required at site) complete all as specified and directed.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including Aluminium snap beading for glazing/ paneling, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.

M&L sheet glass 4.8 mm thick ordinary quality and glazing with oil putty and pin in square n. exc 0.50 sqm in each pan complete as directed.

M&L sheet glass 4.8 mm thick ordinary quality and glazing with oil putty and pin in square exc 0.50 sqm in each pan complete as directed.

M&L 4mm thick ACP board (Aluminium composite panel), exterior grade, (approved colour) fixed with aluminium tapperd clip to aluminium frame work all as specified and as directed.

Supply & fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long or corner type dia 12 cm complete all as directed.

S&F in repair anodised aluminium snap on beading for fixing glass panes/ACP board/Particle board complete all as specified and as directed.

S&F in repair rubber neoprene packing suitable for aluminium doors & windows for fixing glass etc complete all as specified and as directed.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200 mm c/c, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-In-Charge.

M&L for framed work such as grills etc with ends of bars shouldered nd or riveed or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

Hacking out old broken glass ( any thickness, size,quality or description) from wooden frames/steel frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F sheet glass 4 mm thick ordinary quality and glazing with oil putty and pin in square n.exc 0.50 sqm in each pan in wooden frame/steel frame complete as directed.

M&L for 4mm thick figured glass, pin head type and glazing with oil putty or with brass screws in square n.exc 0.50 sqm in each pan for bathrooms/toilets ventilators complete as directed.

Welding in repairs exc 2.5cm but n exc 5cm in length with thickness of metal to be welded exc. 20mm but n.exc 25mm for windows and ventilators complete all as specified and directed.

M&L PCC (1:2:4) type B-0 as in bed blocks for hold fast including necesssary formwork complete as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing to low lying area and rubbish off the premises.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc. 0.11 sqm but n. exc 0.18 sqm of approved colour as in floors etc set and joined in neat cement slurry over 15mm thick sreed bed of cement mortar (1:4) complete all as specified and directed.

M&L for Glazed ceramic tiles Coloured 350 x 250mm/450 x 350mm 7 to 8 mm thick in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over 10 mm thick in CM 1:4 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed.

Renewing glazed tiles in patches on vertical surfaces, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles with 10mm thick rendering in CM 1:4 complete. Notes : (i) New tiles required to supplement old ones shall be measured and paid for at ‘Supply only’ rates under relevant item of this Schedule. (ii) Colour of new tiles shall match with existing broken old tiles.

Supply only glazed ceramic coloured tiles of size 300mm x 200mm x 7mm thick complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over cement screed and jointed over screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finish complete all as spd and directed.

M&L for kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 47 over 10mm thick in cement mortar CM 1:3 complete all as spd and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL.

M & L for Cement concrete 75 mm thick type B- 1, 1:2:4 (20 mm graded aggregate) laid on concrete floors and pavings; laid over cement concrete subfloors etc. and finished to even and rough surface complete all as specified.

M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of flooring complete all as specified and directed.

M&L 75mm PCC 1:3:6 type C1 (using 20mm graded stone aggregate) fininshed the as in plinth protection surfaces even and smooth without using extra cement complete all as specified and directed.

Material and labour for 25 mm thick chequered cement concrete tiles of size 30x30x25 mm mm,set ,jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20mm thick screed bed or bedding layer in cement mortar 1:6 complete all as per specification.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.

M&L old size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in CM 1:6 all as specified as directed.

M&L brick work with half bricks thick fly ash bricks straight or curved on plan exc 6 m mean radius build in CM 1:4 all as specified as directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as directed.

M&L Rendering 15 mm thick cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L Rendering 15 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete surfaces finished and smooth without useing extra cement and using water proofing compound as per manufacturer instruction complete all as specified and directed. Note :- WPC will measuered and paid separatly under relevant item of schedule.

M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar 1:3 finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

Material & Labour for preparation of new surfaces of plastered walls and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of primer over plastered surfaces of walls to prepare the surface even and smooth complete all as specified.

Material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying wall care putty where required for filling to depressions/nail holes/light cracks etc and to make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface to make the surface even and smooth (before and after applying putty as per site situation) as directed by Engr-in-charge, and after preparing the surface smooth applying one coat of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification by using electric paint roller or roller , as per existing or as approved tint/colour complete all as specified and as directed.

M&L for prepration of new plastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed..

M&L for for complete removal of existing treated plastered surface of walls including scraping by means of mechanical scrubber or manually where the machine cannot reach where ever required and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for prepartion of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.

M&L for preparation of newly wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as spd and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of any description not otherwise described over 10cm width or girth complete all as specified and directed.

Taking down steel tubing having bore of pipe 15 mm and connections, including cleaning for refixing or removal to store Note: Old servicable pipes shall be reused after proper cleaning complete all as specified and directed.

Taking down steel tubing having bore of pipe 20 mm and connections, including cleaning for refixing or removal to store Note: Old servicable pipes shall be reused after proper cleaning complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.

S&F 15 mm dia bore steel tubing medium grade galvanised with all fittings and connection complete all as specified and directed.

All as per item No 96 here-in-before but fixing only of 15mm dia pipes.

S&F 20 mm dia bore steel tubing medium grade galvanised with all fittings and connection complete all as specified and directed.

All as per item No 98.00 here-in-before but fixing only of 20mm dia pipes.

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore fancy type stop valve/angle valve , chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore fancy type stop valve/angle valve, chromium plated concealed type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm complete all as specified and directed.

Supply and fix in repair Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long scrwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete complete all as specified and directed.

S&F in repair PVC connection 15 mm size PTMT nuts of length ength 450 mm complete all as specified and directed

S&F as in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and direceted.

S&F in repairs closet Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flusing cistern and flush pipe) including connection to trap and to flushing pipe, antisyphonage connection pipe etc complete making good disturbed surface with existing finish of floor all as specified & directed by Engineer-in-Charge.

S&F in repairs vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device all as specified and directed.

Supply & fix in repairs vitreous china wash basin, white, flat back, size, 550X400mm including bracket for fixing 32 mm waste coupling complete all as specifid and direted.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets). Make- Hindware, Parryware, incl flush pipe of plyethene of low or high density of PVC 32mm dia for low level cistern all as specified and directed.

S&F PVC waste pipe 32mm dia for wash basin 01 mtr to 3 mtr as per requirement basis complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia for wash basin 01 mtr to 3 mtr as per requirement basis complete all as specified and directed.

S&F in repair PVC waste pipe 40mm dia for sink 01 mtr to 3 mtr as per requirement basis complete all as specified and directed.

S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) complete all as specified and directed.

S&F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device all as specified and directed.

Repair to flushing cistern by providing siphon washer set and providing ‘M’ seal in flush outlet pipe and making it fully functional complete all as specified and directed.

Supply and fix in repair for Gun metal gate valve,15 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed.

Dismantling wall and ceiling board of any descrition complete all as specified and directed. Note: Serviceable ceiling boards shall be re-used obtained from dismantling.Note: Serviceable ceiling boards shall be re-used obtained from dismantling complete all as specified and directed.

S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified

S & F powder coated aluminium snap grid frame work of size of grid 605 x 605mm for false ceiling complete all as specified and directed.

S&F 6mm thick non asbestos fibre cement designer building boards fixed or laid on aluminium frame/grid with screws, complete all as specified and directed.

All as per item No 122.00 here-in-before but fixing only.

M&L for 18mm to 20mm thick green marble (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed CM(1:6) complete all as spd and directed.

S&F in repairs PVC SWR pipes 150 mm bore single socketed in any length with rubber ring joint fixed to wall with PVC clamps for rain water pipes including taking down old PVC/CI pipe all as specified and directed .

S&F PVC SWR bends of 150 mm bore.

S&F in repairs PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall with steel clamps all as specified and directed .

S&F in repairs PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC SWR bends of 110 mm bore.

S&F PVC SWR bends of 75 mm bore.

S&F in repair 15mm bore dia brass CP mixer for mixing hot &cold water screwed down for iron pipe and fixed complete all as specified.

S&F in repair aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as spd and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repairs for Solid PVC Wall Lining consisting of 5mm thick single side prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as spd and directed. (Make- Rajshree) incl dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as spd and directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.complete all as spd and directed. (Make- Rajshree)

KAZI SAHABUL ALAM (BID ID -3392137)

Jaibalaji Enterprise (BID ID -3392115)