CERTAIN MAINTENANCE OF B/R E/M WORKS INCLUDING CLEANING / REPAIR OF SEWAGE LINE, MANHOLE, SEPTIC TANK, SOCKAGE WELL ETC AT BB CANTT AREA UNDER GE(AF) SRINAGAR

Amount

Dismantling of plain or corrugated steel sheeting any gauge in roof coverings complete all as specified and directed by Engineer-in-Charge.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed by Engineer-in-Charge.

M & L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, eaves board, fixed with self tapping screws or welding as specified,complete all as specified and directed by Engineer-in-Charge.

S&F Galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with hooks L type or J type or cranked hook bolts, in roofs, walls etc with grade of zinc coating 275 gram / Sqm, Complete all as specified and directed .

S&F Plain, galvanised, mild steel sheeting, 0.63 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 gram / sqm, Complete all as specified and directed .

M&L for preparation of new or priviously untreated steel and iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge

Demolition of Stone slabs and tiles of any description or thickness in floors aprons etc laid in cement mortar of any thicknes, complete all as specified and directed by Engineer-in-Charge

M&L for granite (of any type) work (table rubbed and polished) 20mm thick as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in cm 1:4, complete all as specified and directed by Engineer-in-Charge

Demolition of floor, hearth or wall tilling including cement mortar bedding / backing) and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for Screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 10 mm thick in CM 1:4 for backing coat of wall tiles complete all as specified and directed by Engineer-in-Charge

M&L for non skid joint free coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white / coloured cement to match, Complete all as specified and directed by Engineer-in-Charge.

M&L for double charged Vitrified ceremic coloured tiles 9-10 mm thick (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic (digital glossy finish) coloured tiles 450 x 300 x 7 mm thick on vertical surfaces, alongwith high lighter tiles set and jointed in neat cement slurry and pointed in white / colour cement to match over, Complete all as specified and directed by Engineer-in-Charge.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, Complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) as in hard standing / pavings / plinth protections, finished even and smooth without using extra cement, Complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base for hard standing / pavings Complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc. Complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub-class `B' bricks, (old size brick) straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, Complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceble wooden panneling / boarding with frame work complete all as specified and directed by the Engr-In-Charge

M&L Wooden panelling of second class softwood 12 mm thick with tongue and groove joint fixed in any position over and including wooden framework in second class softwood with plain fillets square or sectional area exc 13 Sqcm and n exc 25 Sqcm at n exc 90 cm centre to centre in both direction and including two or more coat of french polishing on all the exposed surfaces wooden panelling including taking down existing electrical fittings and re-fixing the same, complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone wall / ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L Rendering 15 mm thick in CM 1:6 on other than fair faces of brick work wall and finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finishing even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion including 2 mm thick cement base wall care putty, complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new plastered surfaces of walls and applying two coats of weather coat, Acrylic emulsion paint (100% acrylic) colour and tint as ordered in any pattern over and including one coat of primer (upto 15 metres height) including sides and soffits of the beams, fascias, parapets etc, complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel water tubing 15 mm bore and connection complete all as specified and directed by Engineer-in-Charge.

S&F GI tubes 15 mm bore 'medimum grade' with all fittings & fixture and fixed complete to walls and ceilings complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel water tubing and connection complete 20 mm bore complete all as specified and directed by Engineer-in-Charge

S&F GI tubes 20 mm bore 'medimum grade' with all fittings & fixture and fixed complete to walls and ceilings complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china ware wash hand basin white flat back, size 630 x 450 mm including new brackets complete all as specified and directed by Engineer-in-Charge.

S&F in PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC waste pipe flexible for WHB of 32 mm size complete all as specified and directed by Engineer-in-Charge.

S&F in repairs wash down water closet (EWC) white with P or S trap including PVC Flush pipe 32 mm dia, for low level cistern and plastic water closet seat & cover with mild steel chromium plated or aluminised hinging device and connection to low level flushing cistern etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm bib tap CP, cast copper alloy with capstain head screwed down screwed for iron pipe or for brass ferrule fancy type, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP angle valve of cast copper alloy screwed down high pressure with capstain head screwed both ends for iron pipe or for unions and fixed 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repairs CP shower roses with CP Arms, 15 mm bore, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm size Brass CP wall mixer for mixing hot & cold water fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm dia Brass CP central hole basin mixer with 450 mm braided connection pipe (without pop-up) for mixing hot & cold water, complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass, CP Jet Spray of Standard size for EWC alongwith connection pipe and all fittings as fixed Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs ABS body CP Health faucet fixed with spring action and lever along with 1.2 mtr long flexible connection pipe for supply of water fitted in the existing water connection in the toilets, complete all as specified and directed by Engineer-in-Charge.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf of size 600 x 120 mm with chromium plated bracket, guard and railing complete. Make: Cera / Prayag / Jaquar

S&F in repairs corner glass shelf of size 300 x 300 mm fixed with bracket Complete all as specified and directed by Engineer-in-Charge. Make: Cera / Prayag / Jaquar

S&F in repair tubular towel rail 600 mm long of brass CP including brackets, fixed with chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed by Engineer-in-Charge. Make: Cera/Prayag/Jaquar

S&F in repairs, chromium plated steel grating of maximum dia 125 mm Complete all as specified and directed by Engineer-in-Charge

M&L for complete removal of existing treatment of walls and applying 2 mm thick cement base wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion (OBD) paint on walls complete all as specified and as directed by Engineer-in-Charge

M&L for prepartion of old decorated surfaces of ceiling including filling of holes, cracks with cement base wall putty making surface even and smooth and applying one coat of distemper oil emulsion paint (OBD) complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old painted wooden surfaces of any description and positions, exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old painted steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint in any pattern complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick using excavated soil complete all as specified and directed by Engineer-in-Charge.

Removal of excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Cutting into existing manholes for removing existing drain Pipe and inserting new drain Pipe, making good to walling and rendering in cement concrete 1:2:4 type B-1 smooth finished and forming benching as required. Internal dia of pipe 150 mm complete all as specified and directed by Engineer-in-Charge.

Demolition and breaking up drain pipe 150 mm dia any type (salt glazed stone ware) of any size internal dia, set in cement mortar, including demolition of concrete bed and haunching complete all as directed.

M & L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in bedding including haunching & packing under and against the side of drain pipe 150 mm bore, after they are laid and tested complete

M&L Reinforced concrete pipes, class NP2, laid and jointed complete with collars.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 15 mm thick on brick masonry wall surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing only integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and directed by Engineer-in-Charge. Note:- WPC will be measured & paid separately.

Supply only Liquid water proofing compound

M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia all as specified. Complete all as specified and directed by Engineer-in-Charge.

M&L Precast cement concrete type B-1, 1:2:4 using 20 mm graded stone aggregate as in manhole cover set in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Cleaning of underground sewage pipe (Cleaning length n.exc 30 m from manhole to manhole or from manhole to septic tank) including taking off manhole cover and cleaning of manholes of any size and depth and removing waste material / sludge to a distance of n.exc 300 m and burrying in a pit and placing manhole cover in position after cleaning complete all as specified and directed by Engineer-in-Charge for the following size of pipes:

(a) 100mm bore

(b) 150mm bore

(c) 200mm bore

Cleaning of blocked WC seat of pedestal / squatt pattern upto Ist manhole and making the drain pipe of any size full fuctional by flushing with water to entire satisfaction of engr-in charge including cleaning of 1st manhole and removing the waste material / sludge etc to a distance n. exec 300 m and burning the same in pits complete all as specified and directed by Engr-in -charge.

Cleaning of blocked floor trap of bath room & kitchen etc upto 1st manhole including cleaning of gully / trap and removing the waste material / sludge etc to a distance n. exec 300 m and burring the same in pits complete all as specified and directed by Engr-in -charge.

Dewatering of septic tank / soakage well of any depth by pump or by manual after plugging of incoming sewage lines and throwing water into non residential area or in drain / nallah complete all as specified and directed by Engineer-in-Charge.

Cleaning of septic tanks, soakage well of any depth including inlet and outlet chamber and removing sludge, silt, residue both organic and in-organic nature including any other type of waste material after plugging of incoming sewage line and removing waste material / sludge etc to a distance n.exc 300 m and burrying in a pit complete all as specified and directed by Engineer-in-Charge.

Dismantling of PVC drain pipes upto 150 mm dia, of any descreption Complete all as specified and directed by Engr-in-charge.

S & F 75 mm outer dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge

S & F 110 mm outer dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge

S & F 75mm dia PVC (SWR) bends of any radius, complete all as specified

S & F 110 mm dia PVC (SWR) bends of any radius, complete all as specified

S&F PVC 110 mm dia (SWR) branch piece, single (single Y) equal or unequal, complete all as specified

S&F PVC bend with access door 75 mm dia pipe incl all asseseries complete all as specified and directed by Engineer-in-Charge.

S&F PVC bend with access door 110 mm dia pipe incl all asseseries complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 450 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed.

M&L for Chequered cement concrete tiles of size 25 cm x 25 cm x 22 mm thick, in grey and no pigment, set, jointed in neat cement slurry & pointed in grey cement, as in floors / hardstanding / path etc complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures (DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete, all as specified & directed.

M&L Point wiring with 1.5 sqmm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade draw through & including concealed /surface, non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sqmm copper conductor as earth wire to common earth dolly including concealed in wall / ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

(a) One light/fan point controlled by one way switch 6 amps 240 volts

(b) One 3 pin 6 Amps switch socket out let point on independent Board

(c) One 3 pin 6 Amps switch socket out let point on same board

M&L Point wiring with 2.5 sqmm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade draw through & including concealed / surface, non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 2.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets 16 Amps, 240 volts :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

S&F modular type one way switch 6 Amp 240 volt marked light / fan suitable for one moduel complete as specified and directed. Make- Legrand/ Anchor/ Havells

S&F Modular 6 Amp 5 pin universal socket suitable for two moduel, 240 volts complete all as specified and directed by Engr-in-charge Make Legrand/ Anchor/ Havells.

S&F modular switch one way 16 Amps 240 volts suitable for one moduel complete as specified and directed by Engr-in-charge Make- Legrand/ Anchor/ Havells

S&F Modular 6 cum 16 Amp socket suitable for two moduel , 240 volts complete all as specified and directed by Engr-in-charge Make Legrand/ Anchor/ Havells

M&L for ceiling rose with three terminal as per relevant IS complete as specified and directed. Make Legrand/ Anchor/ Havells

S&F decorative 18 watt LED Batten, with extruded thermoplastic body with PC diffuser fitting with>120º wide distribution with electronic driver all as specified & approved by EIC. Make:- C&S, Havells, Crompton.

Suppy and fix in repair switch Socket cmbination 2 in 1, 3 pin, 15 Amp complete all as specified and directed by Engr-in-Charge.

Suppy and fix in repair Socket outlet 2 in 1, 3 pin, 5 A complete all as specified and directed by Engr-in-Charge.

Suppy and fix in repair Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed by Engr-in-Charge.

S&F modular type two moduel step type fan regulator suitable for 120 watt 250 volts complete as specified and directed by Engr-in-charge Make Legrand/ Anchor/ Havells

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed.

S&F MCB single pole ISI marked `C' series working on 240 Volts 50 Hz AC supply for incomming and out going controlling cercuit of capacity 6-32 Amp breaking capacity 10 KA etc all as specified and directed.

S&F MCB single pole and neutral ISI marked `C' series working on 240 volts 50 Hz AC supply for incomming & out going controlling system of capaicty 40-63 Amps 10 KA breaking capacity etc all as specified and directed.

M/S MAQBOOL BHAT & SONS

M/S ABDUL REHMAN WANI

M/S GULZAR ENTERPRISES

M/S Ghulam Mohammad Shalla

M/S WANI AND SONS

M/s Lal Enterprises

M/S ASHRAF CONSTRUCTIONS

M/S Himalayan Construction and Co.