ELASTIC RAIL CLIP(ERC) MK-V WITH FLAT TOE FOR 60KG UIC/52KG RAIL SECTIONS DRW: (RDSO) RDSO_T_5919_ Alt_2 SPEC: (RDSO) IRS/T-31-2025 Sixth Revision

Special Eligibility Criteria

1. 1

   Purchaser reserves the right to procure Bulk or Entire quantity from RDSO approved vendors or their authorised agent, for the item (RDSO Item ID:3100558; Sub Item ID:3100558001), details as per para 2.8.5.1 of attached bid document besides this para 2.8.1 to 2.8.4 shall also be applicable. Note:- 1- Status as available on UVAM shall only be considered valid for evaluation of offers. 2-The status of the vendor (i.e. approved or developmental vendor) shall be reckoned as on the date of tender opening and not thereafter. However, cases of downgrading/ removal/ suspension/ banning etc., after opening of tender, shall be taken into account while considering the offers.

   Document optionalConfirmation required
2. 2

   Revised Public Procurement (Preference to Make in India) Clause para-2.24 of attached NER BID document is applicable. In terms of para 2.24.10. ( 9 ) of attached bid document , this item is reserved to be procured from a class I local supplier only.

   Confirmation required

Check List

1. 1

   The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance , and such terms quoted anywhere else should be ignored. [Denial of this condition not recommended]
2. 2

   The bidder agrees to supply the tendered stores at the rates quoted by him in accordance with the IRS Conditions of Contract and [or] special Conditions and [or] other Conditions specified/attached with the tender

Commercial-Compliance

1. 1

   Firms should upload Bank detail i.e. Bank Name , Bank Account , IFSC Code and MICR Code, Bidder should invariably indicate GSTIN Number and HSN Code of the offered stores duly enclosing the documentary evidence

   Document requiredConfirmation required
2. 2

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender condition

   Document optionalConfirmation required
3. 3

   In cases of procurement for a value in excess of Rs. 10 crores, the bidder shall be required to provide a certificate from the statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of local content. This is as per Public Procurement (Preference to Make in India), Order -2017, details as per Para 2.24 of attached NER Bid document.

   Document optionalConfirmation required
4. 4

   Please indicate [Y/N] whether you are interested in availing the benefits available to Micro and small Enterprises[MSEs] of their participation in Govt. Procurement in reference to the Ministry of Railway letter No. 2010/RS[G] /363/1 dated 13.02.2019 as mentioned in bid document. If yes, Please attach the requisite registration certificate specifically for the tendered item for the same application issued by appropriate agency. Also indicate whether MSE's is owned by SC/ST/WOMEN/OTHER. The requisite certificate is to be uploaded with tender document. Please note that in absence of the requisite certificate uploaded/ submitted along with the offer , such benifits may not be extended.

   Document optionalConfirmation required
5. 5

   Please mention GSTIN Number and HSN Code of the offered stores duly enclosing the documentary evidence.

   Document optionalConfirmation required
6. 6

   EMD and SD as per Clause 1.18 & 1.19 of attached bid document. Note:-The offers not accompanied by requisite EMD will be ignored summarily, unless falling in exempted category as per para 1.18 of attached bid document. The firm claiming exemption from EMD should clearly indicate valid reasons for such claim duly attaching scanned copies of relevant documents with their e-offers.
7. 7

   In case of any variation between the above mentioned terms and conditions and that of attached NER Bid Document attached, the former shall prevail.
8. 8

   The tenderers shall submit a copy of certificate stating that all their statements/ documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure 5.16 of attached bid document. Non- submission of above certificate by the bidder shall result in summary rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/ digitally signed by which they/ he is qualifying the Qualifying Criteria mentioned in the Tender Document. It will not be obligatory on the part of Tender Committee/ Accepting Authority to scrutinize beyond the submitted document of tenderer as far as his qualification for the tender is concerned. The bidder shall be mandated to submit attached Annexure-5.16 of bid document

   Document requiredConfirmation required
9. 9

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Validity of Offer 90 Days: No deviation from the offer validity period stipulated in the tender is permitted.

2. 2

   Authorised Agent:- 1-Any firm quoting on behalf of OEM must submit tender specific authorization certificate along with their offer and agree for inspection as per para 2.3 of attached bid document, failing which offer shall be ignored without any back reference. 2-The OEM / Authorized dealers/agents must comply with the following conditions, failing which their offer(s) will be ignored. (i) In a tender, either the Indian Agent on behalf of the Principal/OEM or Principal/OEM itself can bid but both cannot bid simultaneously for the same item/product in the same tender. (ii) If an agent submits a bid on behalf of the Principal/OEM, the same agent shall not submit a bid on behalf of another Principal/OEM in the same tender for the same item/product.