REPAIR/MAINT TO FENCING, BOUNDARY WALL, JAFFARI WALL, GATES, TRAPS, FOOTPATH, GATE COLUMNS AND ALLIED WORKS SERVICES AT DEPOT BN TB-I AND MD OFFRs ACCN AREA AT BEG AND CENTRE UNDER AGE B/R-II IN GE (CENTRAL) KHADKI.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces complete all as specified and as directed.

Excavating in soft/loose soil for post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm complete all as specified and as directed.

Material and labour for cement concrete 1:3:6 type C-2 (40 mm graded aggregate) as in post/strut fdn complete all as specified and as directed.

Material and labour for MS work conforing to Fe-410-0 of Fe-310-0 Grade for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work complete and all as specified and as directed.

Dismantling mild steel work of any description and in any position complete all as specified and as directed.

Material and labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-W(Gde- E-250) quality-A all as specified and as directed.

Supply and fix in repairs, Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire complete all as specified and as directed.

Material and labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders,walk ways; railings con forming to Fe.290.Gde-E-165 complete all as specified and as directed..

Dismantling chain link fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as specified and as directed.

Supply only chain link fencing using 3.15mm dia GI wire mesh including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining blots, etc. including provision of binding wire complete all as specified and as directed.

Supply and fix flat iron of size as directed as in fixing clamps or support to chain link fencing, stifners etc fixed with nut and bolts including making necessry holes complete all as specified and as directed.

Supply and fix 10mm dia and over round bars cut to length bent to shape for stiffeners etc and similar work complete all as specified and directed.

Material and labour for mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed the othere, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description over 10cms width or girth & applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Demolition of PCC concrete of any description and in any position not otherwise specifically provided for in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and paths laid in alternate bays & surfaces finished even and smooth without using extra cement, complete all as specified and as directed.

Material and labour for 75 mm thick, PCC (1:4:8) type B-2 using 40 mm graded stone aggregates as in sub base complete all as specified and as directed

Material and labour for 50 mm thick sand filling under floors or foundations including watering and consolidation complete all as specified and directed.

Dismantling of precast interlocking paver blocks/ CHEQUERED TILES laid dry of any description thickness & size complete all as specified and as directed.

Material and labour for 60mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-35 grade with grey cement no pigment confirming to IS 15658-2006 complete all as specified and as directed.

Material and labour for PCC 100 mm thick 1:3:6 type C-2 as in hardstanding/floor (using 20mm graded stone aggregate) finished even & smooth without using extra cement complete all as specified and as directed.

Material and labour for screed bed or bedding layer of mortar 20mm thick average thickness for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.

Material and labour for coloured glossy finish chequered cement concrete tiles of size 30 cm x 30 cm x25 mm thick with grey cement and pigments , set jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement/cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

Material and labour for precast cement concrete solid block masonry with solid block of the grade C1 (1:3:6) (20mm graded aggregate) set in CM (1:6) complete all as specified and as directed.

Description all as per item no 26 above but except material.

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

Description all as per item no 28 above but except material.

Material and labour for providing cement concrete type B-1 (1:2:4) using 20 mm graded crushed stone aggregate as in coping/benching and the like including necessary form work complete all as specified and as directed.

Racking out joints and cleaning the same and pointing to random rubble or polygonal rubble uncoursed or brought up to courses masonry built in cement or lime mortar, including smooth finish complete all as specified and as directed.

Material and labour for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Material and labour for 15mm thick rendering on brick /concrete or dubbed surface in CM 1:4 with water profing compound finishing even & smooth without using extra cement and similar like etc complete all as specifed and as directed. NOTE :- Water proofing compound shall be measured & paid separetely

Supply only Liquid water proofing compound complete etc all as specified and as directed.

Material and labour for preparing new plastered and applying two coat of cement based paint (any tint) over a coat of primer on walls complete all as specified and as directed.

Material and labour for preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying one coats of cement base paint (white or tinned) complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamal paint complete all as specified and as directed.

Dismantling of rusted/damaged mild steel sheeting of any thickness and size from iron gates of any size and welding of 1.25mm thick sheet welded or shouldered to angle iron frame complete all as specified and as directed.

Material and labour for plain, black mild steel sheeting in gates, 1.25mm thick sheet welded or shouldered to angle iron frame and all as specified and as directed.

Restraining and resecuring of barbed wire including removal & refixing of concerntina coil wherever required in single/double security fencing/on security wall complete all as specified and as directed.

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Supply and fix for providing precast cement concrete louvres and jallies, 35 mm thick (measured solid), including all mouldings using cement concrete type B0 1:2:4 (12.50 mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed.

Preparing new plastered surfaces on jallies applying three coat of white wash(lime wash) complete all as specified and as directed.

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes and channels of any size and shape suitable to design, plates, latto , caps etc. The railling design and shape of members are as directed by Engineer-in-Charge, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (the payment includes of stainless steel members alongwith fixing accessories such as nuts, bolts, fasteners etc.) also including taking down of Old MS railing of any description and design complete all as specified and as directed.