Special repair to bldg. No P-134 at (New Assey lines) Jalandhar Cantt under GE (East) Jalandhar Cantt

Amount

Taking down cement plaster of any description thickness including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed.

Removing old lime wash (if any), hacking for key, raking out joints of old brick work built in cement mortar; not previously plastered; and scrubbing down with water etc. to receive plaster, complete all as specified and directed.

M&L Rendering 10mm thick in Cement Mortar 1:6 on fair faces of Brick Walls or on concrete surfaces, finished even and smooth,without using extra cement, complete all as specified and as directed.

All as per Srl item No 3 above but 15 mm thick in CM(1:4) with water proofing compound as per manufacturing struction, complete all as specified and directed . Note :- WPC shall be measured & paid for separately.

M&L plastering 5 MM thick in cement mortar (1:3) furnished even & smooth without using extra cement as on ceiling, complete all as specified and directed.

Ditto all as per item No- 5 but 15 MM thick in cement mortar 1:3 in Chajjas Beam etc with XPM if reqd to make-up to org Shape at any height, complete all as specified and directed.

Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering 15mm thick in cement mortar 1:3 in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm at any height complete all as specified and directed.

M&L for preparing newly plastered surface of wall and applying two coats of Distemper Oil emulsion over a coat of 1mm thick wall care putty on plastered surface, complete all as specified and as directed.

M & L for Complete Removal of existing treatment and preparation of old plastered surfaces of walls and applying two coat of distember oil emulsion over a coat of 1mm thick wall care putty, complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered or unplastered surfaces and apply one coat of white wash on walls including cornices etc all as specified and directed

M&L for prepration of newly surfaces of wall and applying three coat of white wash on ceiling, complete all as specified and directed.

M&L for preprationof old plastered/treated surface of ceiling and applying one coat on white wash on ceiling, complete all as specified and directed.

M&L for prepration of newly surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surface of wall and applying two coat of cement base paint over a coat of of alkali resistant primer and making smooth finish, complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level), complete all as specified and directed.

Demolition of concrete of any description and in any position, complete all as specified and directed.

M & L PCC 25mm thick 1:2:4 type B-0, (12.5mm graded aggregate) and finishing the surface even and rough to receive top layer as under tiles ,stnoe etc, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc .and brushing with neat cement slurry with 3 kg of cement per sqm, complete all as specified and directed.

M & L for machine cut kota stone slab 18 to 20 mm thick as in flooring / stair case landing, laid over & incl. 15mm thick cement screed base in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed.

M & L for machine cut kota stone slab 18 to 20mm thick as in skirting/steps of stair case laid over & incl.10mm thick cement screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed.

M&L for 16-18mm thick pre-polished green marble as in cookong platform over 15mm thick screed bed in CM (1:6) including grinding and mirror polished/granite polished and making hole for LPG pipe and rounding of edge of stone , complete all as specified and directed.

M&L for coloured ceramic glazed tiles of size not less than 300mm x 450mm - 7mm thick fixed with neat cement slurry in vertical surface to wall pointing in coloured cement to match over and including 15mm thick plastering in CM 1:4, complete all as specified and directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick bedding layer in cement mortar 1:6, complete all as specified and directed.

M & L coloured non skid ceramic tiles 7 to 8 mm (squar/rectagular) area of each tile exc 0.11 sqm but nexc 0.18 sqm thick in floor etc set and jointed in neat cement slurry and pointed in white as coloured cement to match over & including 15 mm thick screed bed or bedding layer of cement mortar 1 : 6 for laying of floor finishes, complete all as specified and directed.

Demolition of brick work as in walls/parapet walls, removing grass fungus weed, roots of trees completely, grown on roof/wall surfaces, complete all as specified and directed.

M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radiusbuilt in cement mortar 1:6, complete all as specified and directed.

All as per description of serial item No 27 here-in-before but except bricks complete all as specified.

M&L PCC 1:7:12 type F-2 (40mm graded brick aggregate) as in filling in sunken floor, complete all as specified and directed.

M&L for 15MM thick rendering in CM (1:3) on brick or concrete surfaces mixed with water proofing compound @ 3% by weight of cement, finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. ( Note:- WPC shall be measured & paid for separately)

Supply only integral water proofing compound, conforming to IS 2645 complete all as specified and directed.

M&L for Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m, complete all as specified and directed.

Demolition of re-inforcment cement concrete in any position (below or above ground level), complete all as specified and directed.

M&L for RCC slab, shelves chajja and facia etc in 1:2:4 type B-1 using 20mm graded stone aggregate and similar articles complete all as specified and directed.

M&L for pre-cast RCC slab in 1:2:4 type B-1 using 20mm graded stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

M&L for specified mild steel bars 6 to 8 mm dia deformed bars cut to length, bent to shape required including cranking, bending and binding with and including MS wire (annealed) not less than 0.9mm dia confirming to Fe-410, complete all as specified and directed.

M&L form work to chajjas and similar items including edges, complete all as specified and directed.

M&L for Providing PCC in roof kerbs/coping rounded type B-1, (1:2:4) using 20mm graded stone aggregate, complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering complete all as specified.

Demolition of mud in roofs any thickness incl plastering & leeping complete all as specified and directed.

M & L for Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M & L for Wire brushing and cleaning top surfaces of cement concrete , including flashing and juction of parapets etc, complete all as specified and directed.

M & L for Brushing neat cement slurry with 3 kg of cement per sqm, complete all as specified and directed.

Material and labour for cement concrete in foundations, filling and mass concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding 50mm thick in average complete all as specified and directed.

M&L for Bitumen primer for use in waterproofing and damp-proofing treatments @ the rate of 0.3 Litre / sqm, complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg per sqm all as specified

M & L for A PP based polymeric membrane minimum weighing 3Kg /sqm and minimum 3 mm thick reinforced with polyster non wove fabric ( wt not less than 150 gms /sqm ) laid on primed surface by forced application complete all as specified .

M&L for 40mm thick tiles laid or bedded in cement mortar ( 1:6) 15 mm thick and joints grouted flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

All as per srl item No 48 above but except tiles complete all as specified and directed.

M&L for flush pointing to brick roof tiles in cement mortar 1:3 all as specified

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each all as specified.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but n-exc 4 sqm each .

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each, removing from site, cpmplete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each and refixing in the same opening after adhusting, complete all as specified and directed.

Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but n-exc 4 sqm each and refixing in same opening .

M&L for mild steel work as in door frame chowkhat and cooler stands etc including necessary cutting drilling and welding etc complete conforming to Fe-410 Gde E-290 complete all as specified

S&F 35 mm thick IInd class hard wood plain framed factory made paneled shutters(two panels) with lock rail and panel of 9 mm BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails & styles of 2nd class hardwood. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically preasure treated complete all as specified.

S&F 35 mm thick IInd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc.without sash bars edges of framing plain chamfered or rounded fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:3:6) type C1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3.

All as per description of serial item No 59 here-in-before but comprising gauged shutters complete all as specified and directed. Note for item No 59 & 60 : (i) Glass,wiremesh,painting and grills shall be measured and paid for separately under respective items . (ii) Drg No CEJZ/TD-1019 and 1020 Sh 1/3 to 3/3 are not being uploaded and the same can be seen in this HQ on any working day.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified

S & F figured glass pin headed type, 4 mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane complete all as specified and directed.

S & F in repair factory made built-in steel cup board with pressed steel frame of size 75 mm x 50 mm x 1.25mm thick with pressed steel shutter 1.25mm thick fixed to masonry wall by hold fasts, made out of 25x3mm flat iron including MS hanging rod of 10mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provn of MS peg set 3 pegs including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter and fixing in PCC (1:2:4) all as directed and shown on Drg No CEJZ / TD / 20 / 11 sheet 1/5 to 5/5 dt 01.08.11, complete all as specified and directed. Note :- Drg No CEJZ/TD-20/11 sheet 1/5 to 5/5 is not being uploaded same can be seen in GE Office on any working day

M & L for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforced with MS squre tube supplied and fixing as per specification and drawing as per SSR.

S&F 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail,MS frame shall be covered with heat moulded plain colour PVC “C” channel having stip of 20 mm width stuck inside with solvent cement rail on either side and as gap inset for top rail and bottom rail, welded/sealed to the stiles and railes with suitable PVC sheet beading and joined together with solvent cement supply and fixing in the frame and site as specification and as per drg in SSR.

Supply and fixing of Prayag syment butt hinges 100mm long, complete all as specified and directed.

Supply and fixing Prayag syment tower bolt 200mm long, complete all as specified and directed.

Supply and fixing Syment bow handle 125mm long, complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts stove enameled black,with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts,four on bolt plate and two on staple plate complete all as specified.

S&F in repair 300mm long mild steel sliding door bolts stove enameled black,with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts,four on bolt plate and two on staple plate complete all as specified.

S&F 100 mm size butt hinges medium weight cold rolled mild steel, complete all as specified and directed.

S&F in repair 100 mm size butt hinges medium weight cold rolled mild steel, complete all as specified and directed.

S&F 200 mm long mild steel tower bolt stove enameled black with bright bolt, complete all as specified and directed.

S&F in repair 200 mm long mild steel tower bolt stove enameled black with bright bolt, complete all as specified and directed.

S&F 125 mm mild steel pressed handles oval type ,stove enameled black, complete all as specified and directed.

S&F in repair 125 mm mild steel pressed handles oval type ,stove enameled black, complete all as specified and directed.

S&F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.

S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 150mm complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor overall length of cover plate 150mm complete all as specified and directed.

S&F in repairs 20mm dia curtain rails mild steel chromium plated with fixing brackets fixed in cup boards complete all as specified and directed.

M&L for preparation of new wood surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Ditto as per Srl Item No 84 above but one coat on old surfaces.

M&L for preparation of new steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome, complete all as specified and directed.

Ditto as per Srl item No 86 above but one coat on old surface

Taking down old steel tubing & connection including cleaning for refixing for 15mm bore pipe complete all as specified

Ditto as per Srl item No 88 above but 20 mm bore

S&F 15mm bore galvanized iron tube s medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified

Ditto as per srl item No 90 above but for 20mm bore tube complete all as specified

Refixing old steel tubbing & connection in new or old position (walls ceiling/floors etc) of 15mm bore pipe all as specified

All as per Srl item No 92 above but 20mm bore pipe all as specified.

S&F in repair 15mm bore Bib taps fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs 15mm bore dia (concealed/Angular) stop valves fancy type chromium plated, screwed down , high pressure ,screwed both ends for iron pipe or for union and fixed complete all as specified and directed

S&F in repair stop/angle valves 15mm , fancy type chromium plated , screwed down , high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for unions and fixed.

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair Orrisa pattern WC in ground or first floor vitreous china white of size 580mmx440mm fixed in repair incl provision of lime concrete bedding and P trap and breaking up of existing damaged WC seat and connecting flush pipe etc complete all as spd. and directed by E-in-C

S&F in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified and directed.

S & F in repair flexible PVC waste pipe of approved quality 25 mm bore, 75 cm long with one end socketed fixed to waste coupling, complete all as specified and directed

S&F in repair 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density with PVC. 32 mm dia, pipe complete all as specified and directed.

S&F in repair CP grating 125mm dia fixed in repair all as specified and directed.

M&L in repair for acrylic soap dish 6mm thick of size 125mm fixed to plug with chromium plated brass screws complete all as specified and directed.

M&L for chromium plated peg set of 5 (PTMT), fixed with screws and plugging to rear side of door shutter in bath, complete all as specified and directed.

S&F 500 ltr rotational moulded polyethylene water storage tank double layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description complete all as specified.

Disconnecting water tanks of 500 ltrs capacity setting aside for repairs cleaning and removing all scale and dirt etc from tank and mounths of circulating pipes & re-fixing in position all as specified

S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms) complete all as specified.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms) complete all as specified.

S&F in repair Brass chromium plated shower rose 125mm size, complete all as specified and directed.

M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.

Taking down eaves gutters and rainwater pipes/sewage pipe (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store.

S&F 110 mm bore PVC pipes 1st quality single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and directed.

S&F 75 mm bore PVC pipes 1st quality single socketed in any length with rubber ring joints ixed to walls or laid in floor, complete all as specified and directed.

S&F 110 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with rubber rings ljoits fixed to walls complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with rubber rings ljoits fixed to walls complete all as specified and as directed.

S&F 75mm dia PVC (SWR ) vent cowl complete all as specified and as directed.

S&F in repair for tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repair stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785 mm x 255 mm and weight not less than 8.00 Kg each of approved quality, complete all as specified and directed.

S&F in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum), complete all as specified and directed.

M&L 50mm thick PCC 1:3:6 Type C2 using 40mm graded aggregate as in plinth protection/path complete all as specified and as directed.

M&L Durastone Coloured Tiles 300x300x10-12mm thick, in Floors, set and jointed in Neat Cement Slurry and pointed in White Cement mixed with Pigment to match the colour of tiles laid over and including screed bed or bedding layer 15 mm thick in CM (1:6), complete all as specified and directed.

M & L for PCC 1:3:6, type B-2, using 40mm crushed aggregate as in surface channels and drains, complete all as specified and directed.

Taking down carefully existing point wiring aluminum/ copper conductor for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including sunken type pressed steel terminal boxes and plastic laminated white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point / call bell point controlled by one way switch complete all as specified and directed.

All as per srl item No 127 here-in-before but socket out let 3 pin, 5 Amp on on independent board

All as per srl item No 127 here-in-before but 3 pin, 5 Amp on same board with other switch

All as per description of srl item No 127 here-in-before but one light point controlled by two way switch

All as per description of srl item No 127 here in before but using 4 sqmm (nominal area) PVC stranded copper conductor cable with 4 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin socket out let 15 Amps on independent board.

Supply and fix switch piano flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed

Supply and fix switch piano flush type, 15 Amps, 240V AC, single pole, one way complete all as specified and directed

Supply and fix socket out let 5 Amp 5 pin flush type complete all as specified.

Supply and fix switch socket combination out let universal type 6 pin 5/15 Amp multi pin complete all as specified.

Supply and fix switch piano flush type, 5 Amps, 240V AC, single pole, two way complete all as specified and directed

Supply and fix ceiling rose surface type bakelite 65 x 50 mm three terminal PVC / Polycarbonate isolated body complete all as specified.

Supply and fix switch bell push flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed

Supply and fix call bell ding dong AC single phase 230 volts including wooden/PVC board of suitable size, connecting and testing complete all as specified and directed

Material and labour for sub main wiring in repairs with two runs of single core PVC insulated (FRLS) unsheathed copper conductor multistranded cable of size 4 sqmm 1100 volts grade drawn through in & including PVC conduit 25mm dia & 4 sqmm single core copper conductor multistranded PVC insulated (FRLS) unsheathed cableas earth wire continuity conductor complete all as specified and directed by Engineer in charge. Note : (i) Two run of cable 4 sqmm and one run of 4 sqmm earth wire alongwith PVC conduit shall be measured and paid as one unit only.

Supply and fix sheet metal enclosures for DB's with 200 Amp rated bus bar double door class IP-43 epoxy coated inside and outside 8 way SPN 230 volts complete all as specified and directed

Supply and fix MCB SP 6 to 32 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.

Supply and fix MCB SPN 6 to 32 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.

Supply & fixing in repair energy saving tube light luminaire work diffuser LED with comprising with CRCA MS box and 4 feet 20 watt (min) retro fit tube rod having thermally conductive material lumen output 2100 lumens (min) 6500 K, power factor more than 0.95, IP-20 Class-I protection with inbuilt LED driver, surge protection upto 2 KV, operative on 140 volts to 270 volts AC supply products must be made in India only, complete prewired, connection and testing complete all specified and directed Make:C & S Cat Part No LTDCD1220W LED/WD or equivalent makes as in Appx 'B'

Supply and fix lamp holder PVC/Polycarbonate with back plate suitable for batten fittings including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.

M & L for city 1 new decorative wall light fixture made up of polycarbonate, suitable for 15 W LED (Spiral B-22 base) lamp type 1x15 W (including led Lamp) Make : Havells Cat No LHDL06160099 or equivalent make as mentioned in Appx 'B'

Taking down and refixing ceiling fans of any make and type, painting of fans complete (as per previous colour) with synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc including replacement of flexible wire, rubber reel, nuts, bolts complete all as specified and directed.

Supply and fix fan regulator, electronic type, five steps socket type single phase, including connection complete all as specified and directed.

Supply & fix bulkhead fitting decorative ceiling/wall mounted bulk head with engineering plastic housing and top frame with opal PMMA diffuser suitable for 1 x 06 watt LED bulb including 1 No 06 watt LED of Cat part No. CG80IB6WLED of C&S electric or equivalent as in Appx 'B' complete all as specified and directed.

Supply and testing laying XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (Heavy duly) 1100 Volts grade with standed aliminum conductor of size 25 Sqmm 4 core complete all as specified

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Removing excavated material n not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

Supply and filling for sand cushioning 8 cm before laying of cable & 15 cm after laying of cable complete all as specified Note :- Punned down thickness shall be measured

Supply only old size sub class ‘B’ bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed

Supply and fixing GI pipe ISI Marked of size 50mm dia bore light grade for cable protection under road/floor along the pole including fittings complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of theplate not less 1.5 mtr deep below normal ground level connected to GI earth conductor 32x6mm connected galvanised iron or of steel to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit (II) PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed.

Supply and fix in repairs energy saving & environmental friendly long life versalite pressure die-cast aluminium luminaire with heat resistant glass and suitable optics for uniform distribution of light 20 watt LEDs building security lights with high efficiency electronic driver, having IP 65 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India qty including bracket made out of GI pipe 32mm dia bent to shape and clamp 40x6mm with nuts and bolts. Make :Havells cat part No.ENDURAPEARLSL20WLED757SASYTOPC or equivalent as mentioned in appendix 'B' Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accedited labortory from manufaturers.

Supply and fix exhaust Fan 300mm sweep (Star BEE rating), 900 RPM, single phase, 230 Volts heavy duty with louvers, shutter including three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal, making opening in the wall as required, fixing the fan with suitable size of nut, bolt washer and making good the disturbed surfaces as per existing complete all as specified and directed

Cutting of holes for exhaust fan of 300mm dia sweep in bricks walls built in cement mortar and stone walls including making good to disturbed dismanited portion in cement mortar 1:3 complete same with adjoining specification all as specified and directed

Supply and fixing LED lamp 20W adore 6500 KB 22 CDL ball lamp complete all as specified. Make:- Havells Cat Part No LHLDEREMK8X020 or equivalent make as mentioned in Appx 'B'

Hans raj sons

HYLAND CONSTRUCTION COMPANY

SARASWATI CONSTRUCTION CO

M/s Pardeep Kumar

M/S RAJESH CONSTRUCTION COMPANY

NATIONAL BUILDERS

M/S Vinod Kumar

THAPAR CONSTRUCTION COMPANY

M/S Kuldip Construction Co.

BHARAT ENTERPRISES

M/s Nirmal Singh and Co.

Motorway Constructions