MP1/WELDING SHED/YARD/CMSRU

Earth work in excavation by mechanical means (hydraulic excavator)/manual means in foundation trenches or drains including dressing of sides, ramming of bottoms , lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within CSL premises.All kinds of soil

Providing and laying plain cement concrete 1:4:8 using 40mm down graded IS nominal size hard broken metal including cost and conveyance of all materials,labour for mixing, laying, consolidating curing etc.complete but excluding cost of cement and cost of formwork.

Providing formwork using shuttering sheet,supporting beams, supporting jacks,wooden planks and other incidentals etc. including cost and conveyance of all materials labour etc removal of formwork after completion of work and clearing all materials for the following. Form work for bed concrete

Providing formwork using shuttering sheet,supporting beams, supporting jacks,wooden planks and other incidentals etc. including cost and conveyance of all materials labour etc removal of formwork after completion of work and clearing all materials for the following. Form work for sides

Providing and laying reinforced cement concrete 1:2:4 using 20mm down graded broken granite metal in ground floor upto 5m height including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing,cost of dewatering etc.complete but excluding cost of cement,cost of formwork and cost of reinforcement.

Providing and laying reinforced cement concrete 1:11/2:3 using 20mm down graded broken granite metal for columns , beams and slabs including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing, cost of dewatering etc.complete but excluding cost of cement, cost of formwork and cost of reinforcement. (formwork and reinforcement which will be measured separately).All work upto plinth level.

Reinforcement for RCC work including cost and conveyance of all materials, labour for, uncoiling,straightening, cutting,bending,tying with 22G binding wire etc.complete but excluding cost of steel (mild steel or tor steel) but including cost of binding wire.

Brick work using first class burnt bricks ( 21x10x5cm) including cost and conveyance of all materials, labour, other incidentals etc complete, including cost of cement Using CM 1:5 For foundation and basement

Brick work in CM 1:4 for half brick wall using first class burnt bricks ( 21x10x5cm) for superstructure including cost and conveyance of all materials, labour, other incidentals etc complete, excluding cost of cement. Up to second floor level

Supplying and fixing single moulded FRP doors including cost of frame work, accessories such as 100mm SS hinges 3 nos., 100mm SS tower bolt 1no., 150mm aluminium aldrop 1no., 125mm aluminium handle 2nos. and necessary screws including cost of labour and all other incidentals etc. complete.

Supplying and fixing / replacing M.S weld mesh 25mmx25mmx4mm to wooden members, doors etc. (wooden members will be measured and paid separately) using necessary screws, painting with one coat of iron primer etc. complete.

Providing and laying plain cement concrete 1:11/2:3 using 6mm/12mm down graded IS nominal size hard broken metal after cleaning the surface and applying necessary bonding agents like Nitobond SBR or equivalent @1.3litre/m3 for proper bonding between old and new concrete including cost and conveyance of all materials, formwork, labour for mixing, laying, consolidating curing etc.complete but excluding cost of cement.

Applying florolac paint of approved brand, quality and colour to floors after rubbing and cleaning the surface, including cost and conveyance of all materials, labour etc complete.

Supplying and fixing roofing/cladding with 0.56mm thick or nearest available thickness aluminium corrugated sheet using self tapping carbon steel screws having high corrosion resistance with required drill point, washers etc. from reputed manufacturers, with minimum overlaps of 150mm at ends and two full corrugations on sides, including cost and conveyance of all materials, labour for all leads and liftsup to a height of 5metres , other incidentals etc complete.

Plastering with CM floated hard and trowelled smooth including cost and conveyance of all materials, labour, curing etc.complete as directed by the Engineer-in- charge but excluding cost of cement. 1:4, 12mm thk

Finishing the plastered surface with approved quality Putty including cost and conveyance of all materials,labour etc.complete.

Painting with primer of approved quality and shade after rubbing and cleaning the surface including cost and conveyance of all materials,labour, scaffolding other incidentals, curing (wherever required) etc.complete.One coat cement primer on plastered surface

One coat iron primer

Painting with ready mixed plastic emulsion paint of approved quality and colour after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour, scaffolding other incidentals etc. complete. Two coats on new surface

Painting on iron or wood surface with synthetic enamel paint of approved quality and colour after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour,scaffolding other incidentals etc. complete. One coat on new surface

Fabrication of all types of structural steel works by straightening,cutting & welding using all types of steel sections plates,flats of any size and weight as per approved drawing or as instructed,erecting in position to line and level by welding/bolting embedding in concrete including hire charges for tools and plants,cost of electrodes,other incidentals etc. complete all as directed by the Engineer-in-charge.Using steel procured by the contractor

Providing and fixing GI chain link fabric fencing of dia 4mm or nearest available size of required width in mesh size of 50x50mm on M.S. structurals already fixed using suitable bolts and nuts including cost of chain link fencing, labour etc complete.(M.S structurals measured and paid seperatly.)

Suppying and stacking at site OPC/PPC/PSC conforming to relevant IS

Supplying and stacking at site TOR steel reinforcement bars of different diameters conforming to relevant IS1786 .

Providing and fixing in position powder coated aluminium single leaf door with outer frames vertical styles & top horizontal member of size 50mm x 45mm x 2mm, bottom horizontal member of size 100mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1no. door lock, 2 nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 1no of door closer of approved make.

GRID CEILING Providing & Installing to true line and level commercial type Suspended Modular Ceiling suspended using suitable support system at every 1200mm intervals. General Requisites; Grids width: 24 mm finished in approved shade (white). The main runners & cross Tees to have "stab" installation system made of corrosion protected galvanized steel or approved equivalent. Tile Specification Tile type: Calcium Silicate ceiling Tile Size 600 x 600 x 15 mm thk. Edge detail: Tegular Ceiling Suspension System Grid Member Sizes. Main Runners: 24 x 32 x 0.30 mm or nearest available size Cross Tees: 24 x 24 x 0.30 mm or nearest available size Perimeter Section: 24 x 27 x 0.40 mm or nearest available size. False Ceiling will be measured on horizontal Plane only. Horizontal Plane measurements are to be inclusive of vertical drops, edge mouldings, fascias etc. All extra tiles occupied by lights and diffusers to be returned to department Rate quoted to include all cut outs required for light fixtures.

Supplying and fixing the following water supply fittings approved by the Engineer-in-charge, including cost and conveyance of all materials, all labour for fitting, all other incidental charges etc. complete for all levels.

15/20 mm dia angle cock

SS gratings - 125/150mm size

Brass ball valves 25 mm

Supplying, fixing, laying and jointing the following dia PVC pipes with pasted type joints of approved quality using solvent cement including all cost and conveyance of all materials, sundries etc. complete. The rate shall be inclusive of supplying and fixing necessary specials etc. as per the direction of the Engineer-in-charge.

25mm dia

110mm pasted PVC pipe(4kgf)

50mm dia (10kg/cm2)

Supplying and fixing ISI marked / best quality approved brand 110 mm PVC specials at all heights including cost and conveyance, all labour and all other incidentals etc. complete all as directed by the Engineer-in-charge.

Tees, door tees, bends etc.

Adapters, reducers, offsets, vent cowl etc.

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard card ground fixed to wooden cleats with CP brass screws and washers complete.

Supplying and fixing PVC multi floor traps with 110mm dia including cost and conveyance of all materials, labour, other incidentals etc. complete.

Providing and fixing 15mm nominal bore CP brass long body bib cock with wall flange of approved quality and make.

Supplying and fixing PVC line traps including cost and conveyance of all materials, labour, other incidentals etc. complete.

Providing and fixing in position louver type ventilator using powder coated Aluminium frames of approved quality and shade using 48x38x1.5mm size or nearest available sections, louvers made with 4mm thick glass, screws, nails etc. including cost and conveyance of all materials, all labour etc. complete as directed by the Engineer in charge.

Providing and fixing in position fully glazed aluminium super sliding window/ventilator with lock system, powder coated aluminium heavy section with sliding shutters using following sizes or nearest available size 63.5 x 31.75 x 2mm for frames, 38.10 x19.5 x 2mm for shutter interlock, vertical and horizontal and plain glass 4mm thick including all fixtures like hinges, locking arrangements, handles, EPDM beadings etc including cost and conveyance of all materials, labour, other incidentals etc. complete.

Provinding and fixing electrification work inside material&HR office , toilet and bathrooms including all lights,switch boards,exhaust fans,AC etc list and work is attached.

M/s Roy Infra and Developers

arcoma