COMPREHENSIVE MAINT WORKS IN AREA III AND IV AT TALBEHAT MIL STATION

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and directed.

M & L for Non-skid coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.

M&L for coloured Glazed ceramic tiles 600 x 300 x 7mm thick tiles on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including cement mortar 1:4, 10mm thick plaster complete all as spd & directed.

M/L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand in vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor aprons etc laid / bedded and pointed in any mortar.

M & L for 20mm thick granite on kitchen platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

Moulding as In edge of granite platform complete all as specified & directed.

Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.

All as per srl item above but 20 mm bore

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

All as per srl item above but 20 mm bore

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site spd and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, supplying and fixing in opening as per specification and drawing completeall as specified and directed.

S & F factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified specified and directed by Engineer-in-Charge. Note:- Glass and Wiremesh paid Seprately.

M&L for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors,ladders; framed baluster,railings and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each

S&F in position 4.8mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium framen n. exc 0.5 sqm in each pane all as specified and as directed.

S&F butt hinges 100mm extruded aluminium alloy hinges pin anodised and fixed.

S&F 125mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S&F in repair Oval shape WHB size 560 x 410mm of including brackets,including CP waste coupling 32mm,waste pipe complete all as specified and directed.

M&L brick wall or plaster cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including brackets with padestal, CP waste coupling 32mm ,waste pipe complete all as specified and directed.

S&F in repair Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern), white, including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and directed

S&F in repair PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F in repairs chromium plated jet for pedestal type WC with 1.5 mtr tube as approved by Engr-in Charge. Make-Prayag/Jaquar

S&F in repair PVC connection, heavy duty 15 mm bore, 450 mm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed.

Ditto Item No 30 but length 600mm

S&F in repairs PVC waste pipe 32mm bore 600mm long with one end socketed complete all as spd & directed.

S&F in repairs PVC waste pipe for urinal 40 mm bore 750mm long with one end socketed complete all as spd & directed.

S&F in repairs grating square 125mm size of CP with centre hole movable or side hole for fix to waste pipe complete al as spd & directed.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as sped & directed.

S&F Half/quarter turn chromium plated 15mm bore kitchen sink mixture 2 in 1 complete with bend pipe and wall flange, complete all as spfd & directed

S&F Half/quarter turn chromium plated 15mm bore wall mixture 3 in 1 with provision for over head shower with 115 mm LB pipe & wall flange complete with bend pipe and wall flange, complete all as spfd & directed ,Make:_ Parryware, Hindware, Jaqur.Prayag

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L15mm thick plaster in CM 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.

S&F in repair One piece ceramic floor mounted western water closet white with soft close seat cover including flush tank, trap and all fittings complete all as specified and as directed, Note:- The size, colour, design and Make shall be Approved by Eng-in-Charge.

S&F in repairs chromium plated faucet for pedestal type WC with 1.00 mtr tube and hook as approved by Engr-in Charge. Make:- parryware, prayag, Jaquar

S&F brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union all as spfd & directed by Engr-in-charge.,Make:- Parryware, Hindware, Jaqur.Prayag

S & F in repair 15mm bore light angular stop valves with wall flange, Half Turn / Quarter turn, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make :- Parryware , Hindware ,Prayag, Jaquar

S & F in repair 15mm bore light angular concealed stop valves with wall flange, Half Turn / Quarter turn, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make :- Parryware , Hindware ,Prayag, Jaquar

S&F in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.Make : Parryware , Hindware ,Prayag, Jaquar

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F Half Turn / Quarter turn, 15mm dia CP central hole basin mixer without pop up waste system with 450 mm flexible hose for mixing of hot and cold water screwed for iron pipe and fixed complete all as specified and directed. Make : Parryware or Hindware , Prayag or Jaquar

S&F in repair brass chromium plated towel rail 20mm dia D type 60cm long between flange all as specified and directed by Enge-in-Charge

S&F in sheet glass assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets guard and railing 60cm long complete all as specified and directed by Engr-in-Charge

S&F in repair chromium plated corner shelf complete all as specified and directed by Engr-in-Charge Make:- Parryware or equivalent in specified makes

S&F Sink made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union overall size not less than 495x429mm, bowl size 410x330x 160mm complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm bowl size 410mm X330mm x160mm complete al as specified and as directed

S&F in repair bevelled edge looking mirror 5.5mm thick of size 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as spfd and directed by Engr-in-charge.

Dismantling of existing unserviceable water tank of any description capacity exc 250 Ltr but n.exc 500trs capacity each complete all as specified and directed

Dismantling water tanks of capacity exc 500Ltr and n.exc 1000Ltr and removing to store

S& F rotational moulded synthetic (HDPE) water storage tank 500litre capacity (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I complete all as spd & directed.

S&F rotational moulded polethylene water tank of 1000Ltrs capacity (Cylindrical vertical with closed top) noticed and portion all as specified SSR Part-I complete all as spd & directed.

S&F in repair ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as spd & directed.

S&F in repair 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe all as specified and as directed

S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20 mm dia, ISI marked complete all as spd & directed.

S&F in repair tubular stainless steel curtain rod 20mm dia with including fixing brackets complete all as specified and directed.

S&F decorative type knobs with bracket of Stainless steel fixing at end of curtain rod complete al as spd & directed.

S&F in repairs Toilet paper holder of chromium plated fixed to walls with chromium plated brass screws complete all as specified and as directed.

S&F in repair Towel Ring of chromium plated fixed with and including Chromium plated brass screws approved by Engr-in Charge. Make-Prayag/Jaquar.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples completed all as spd & directed.

S&F in repair Stainless steel Magnetic door catcher size 5.08x2.54x2.54 cm with plate completed all as spd & directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.

S & F figured glass pin headed type, 4mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane for steel or wooden windows/doors fixed with wooden beadand pin tacked complete all as specified and directed.

S&F 0.9 to 1.5m bottom door seal brown Aluminium frame 38 to 45mm width all as specifid and directed

Demolition of Reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) complete.

S&F steel reinforcement of TMT Bars of size 8mm dia and over cut to length bent to shape as required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

M&L for form work, fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works flat n exc 200mm thick (Horizontal or slopping) etc complete all as specified and directed.

M&L for form work fair finished to edges of concrete flats, treads floor and roofs n exc 20 cm wide and sides of RCC/PCC bends in walls (horizontal or slopping) and similar works exc 10 cm but n exc 20 cm wide complete all as specified and directed.

M & L for RCC 1:2:4 (Nominal Mix), type B-1, using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc .complete all as specified and directed.

S & F in repairs 18 mm thick Celuka ply / PVC of grade 1 quality of one side prelaminated and other side plain white or colour to make kitchen cabinet/ drawer shutters and similar work complete as per specifications and as directed by the engineer - in - charge.Make:-Rajshri or equivalent

S&F continous (Piano) hinges, brass finish of whem open 30mm width of flaps complete all as specified and as directed

S & F stainless steel handles 100 mm size for kitchen cabinet/ any shutters complete all as specified and as directed.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

RAHUL ASSOCIATES (BID ID -3315825)

m/s gupta trading (BID ID -3315041)

MS SHUBHAM SANTOSH JAIN (BID ID -3315815)

M/s Indu Enterprises (BID ID -3315941)

ROHIT ENTERPRISES (BID ID -3316112)

VEER SINGH CONSTRUCTION (BID ID -3316233)

R.P ASSOCIATES (BID ID -3316302)

M/S SACHENDRA KUMAR JAIN (BID ID -3315616)