GE(W)/HSR-22/21-22 PROVN OF TOILETS FOR OR LINE AT DBS, SASF BHOJRAJ, PROVN OF IIT LAB VEH SHED NEAR BLDG NO P-1519 AND RAISING/REPAIR OF EXISTING BOUNDARY WALL TO BLDG NO P-570 AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting outt in soft/ loose soil complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and getting out in soft/ loose soil complete all as specified.

All as per item No 2.00 above but exc 1.5 mtr and n.exc 3 mtr depth

All as per item No 2.00 above but exc 3 mtr and n.exc 4.5 mtr depth

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/ loose soil including removing surplus soil to a distance n. exc 50m complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, exc 1.5 mtr but n.exc 3 mtr deep and getting out in soft/loose soil complete all as specified and directed.

M&L for Hardcore of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete type D-2 , 1:4:8 ( using 40mm graded stone aggregate ) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for cement concrete type B-2 , 1:2:4 (using 40mm graded stone aggregate ) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for 20mm thick rendering in cement plaster 1:3 on fare faces of brick or concrete surface finish even and smooth without using extra cement including mixing of water proofing compound complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W(Gde-E-250) quality-B complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including welding etc conforming to Fe-410-(Gde-E-250) quality-B complete all as specified and directed.

M&L RCC M-25 (Design mix) 20mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-25 (Design mix) 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. complete all as specified and directed.

M&L for brick work with fly ash Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with fly ash Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:4 in half brick thick complete all as specified and directed.

M&L for 50mm thick, cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in plinth protection, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed. .

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and directed.

S&F mild steel flat iron of any size including cutting , drilling holes as in wind tie complete all as specified and directed.

S&F Mild steel screw bolts (purpose made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm and n exc 50cm long and 16 to 20 mm dia of neck complete all as specified and directed.

M&L for preparation of new untreated steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new untreated steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over existing coat of red oxide primer complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall / as window chajja, fixed with shelf tapping screws complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall / as window chajja, fixed with shelf tapping screws complete all as specified and directed.

Returning filling with earth obtained from excavation including spreading, watering & consolidation in layers not exceeding 15 cms thick, complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia. complete all as specified and directed.

Ditto as per item No 29 above but 6 to 8mm dia -ditto-.

Ditto as per item No 29 above but for 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders.6 to 8mm dia -ditto-.

M&L for Formwork to sides of concrete foundations, footings , bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finish with rough finish flat surface complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide with rough finish flat surface complete all as specified and directed.

Supply only intergal liquid water proofing compound complete all as specified and directed.

M&L for 10mm thick rendering over brick / concrete wall surfaces trowelled to even & fair without using extra cement in CM 1:6 on wall surfaces complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 on fiar faces of brick / concrete wall surface finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint of any tint over one coat of primer complete all as specified and directed

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

S&F pressed steel frames prepainted 105 x60mm for doors with one or more rebates made out of 1.25mm thick PBI sheet including necessary lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F factory made Steel windows, ISI marked, (Box Type) with side hung shutters including mild steel butt hinges, tower bolts, handles etc complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including taking down old existing window and making good disturbed surfaces of walls,complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3. (iii) Glass pane/wire gauze shall be measured and paid separately.

S&F factory made Steel windows, ISI marked, (Box Type) with side hung shutters including mild steel butt hinges, tower bolts, handles etc complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including taking down old existing window and making good disturbed surfaces of walls, complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3. (iii) Glass pane/wire gauze shall be measured and paid separately.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm each complete all as specified and directed..

S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed..

S&F 35mm thick factory made plain framed, paneled shutter made of 2nd class HW (Bonsum/Hollock) of 35 mm thick(two panels)with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles ,fabricated type complete all as specified and directed

S&F Aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F stainless steel butt hinges 100mm, complete all as specified and directed.

S&F 200mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for preparation of new wood or wooden based material surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for coloured Non skid ceramic tiles 7 to 8mm thick , area of each tile exceeding 0.11 sqm but n.exc .18 sqm in floors etc set and jointed in neat cement slurry pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed..

M&L for coloured designed glazed ceramic tiles in vertical surface of size 350x250x7mm /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for providing precast cement concrete type B-I 1:2:4 using 20mm graded crushed stone aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face set in cement mortar 1:4 complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550 x 400 mm size, incl cutting for and pinning in ends of brackets or erecting stand including supply and fixing waste pipe complete all as specified and directed

S&F 75mm outer dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F 15mm bore bib tap, brass chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed.

S&F 15 mm bore steel water tubing (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tubing (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 1000 ltr capacity rotional molded polythylene water storage tank three layer white triple layer (Cylinderical vertical with closed top , white in colour ) hoisted kand fixed in position including ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors dia of pipe 110mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors dia of pipe 75mm complete all as specified and directed.

S&F vitreous china squatting pan (Orissa pattern) water closet (white) size 580x440mm with integral foot rests including connection to trap and flushing pipe antisyphonage pipe etc including provision of PCC (1:7:12) type F2 in filling complete all as specified.

S&F PVC valveless syphonic type of 10Ltr capacity flushing cistern with inlet , ball valve and handle including PVC flush pipe of 32mm dia complete all as specified and directed

S&F 15mm bore angle valve, CP cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs vitreous china half stall urinal, white with grating and union for discharge pipe includng providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60mm long brass screws complete with PVC flush pipe complete all as specified and as directed.

S&F brass chromium plated shower rose 125mm size with or without swivel joints including Stainless steel arm fixed to steel pipe or union complete all as specified and directed.

S&F Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reiforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

M&L for 150 mm dia NP2 pipe complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed.

S&F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified and directed.

S&F 100mm dia sand cast iron cowl with cement joints complete all as specified and directed.

M&L for PCC 1:2:4 using 20mm graded crushed stone aggregate as in rounded and chamfered edge complete all as specified and directed

M&L for 5mm thick rendering in CM 1:4 on soffits of slab complete all as specified and directed.

M&L for 15mm thick rendering in cement plaster 1:3 on fare face of walls surface fare finished even and smooth without using extra cement with water proofing compound (water proofing compound will be measured and paid separately) complete all as specified and directed.

M&L cast iron work grade FG 150, unmachined, in brackets, gully traps, grating, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles each exc 5.0 kg complete all as specified and directed.

M&L providing, cement concrete type B1 1:2:4 (12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth curses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates kerbs not provided for in item of SSR, water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed.

M & L 25mm thick (measured solid) pre-cast cement concrete (1:2:4) type B-0 using 12.50mm graded stone aggregate as in louvers, jalli and similar work set in CM (1:4) including all moulds but excluding frame etc complete all as specified and directed by Engineer - in - Charge.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as specified & directed.

M&L for point wiring for one light / bell / Ceiling fan/Exhaust Fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLS drawn through rigid PVC coduit 20 mm dia medium grade and conduit accessories concealed type in walls/ceilings and including change of steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FRLS connected to common earth dolly complete complete all as specified and directed. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).

S&F switch piano flush type, single pole, one way, 5/6 Amp, 230/240 Volts grade complete all as specified and directed.

S&F Lamp holder of PVC / Polycarbonate type surface with 9 watt LED bulb complete all as specified and directed.

S&F ceiling rose surface bakelite, 3 terminals with back plate etc complete all as specified and directed.

S&F in replacement LED tube light fitting 18W metallic frame /batten, Retro, Box type surface and wall mounted, including LED tube light rod , high efficiency including making connection, complete all as specified and directed.

S&F MCB SPN, 32 to 40 Amps 240 Volts , type 'B' curve, 10 KA, for fixing in DB complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps 240 Volts , type 'B' curve, 10 KA, fixing in DB complete all as specified and directed.

S&F Sheet metal enclosures for DBs when MCBs to be used Single pole and neutral (SPN 240 Volts) with 200 Amps rated busbar 8 way double door complete and all as specified and directed

S&F Exhaust Fan 300 mm sweep, heavy duty , 1400 RPM, single pole , 230 volts, fixed on wall with suitable size nut, bolts and washers and connection with and incl 3 core flexible wire 0.5 Sqmm copper flexible cable complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore upto 7.50 metre long GI pipe light grade for earth wire protection fixed with poles/wall with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified and directed.

Supply, lay, jointing, commissioning and testing LT cable XLPE insulated, armoured electric power cable with aluminum conductor (heavy duty) 1100 volt grade, 16 Sqmm 2 core, laid in trenches/duct or fixed to wall/passing through pipe with suitable cable grounds, cable lugs complete all as specified and directed.

Sand filling in trenches with clean dry and unwashed including gently punning around cables complete all as specified and directed.

Material & labour for bricks covering to under ground electric cable using sub class 'B' bricks laid dry, flat, perpendicular to the direction of the cable complete all as specified and directed.

M/S Sulakh Brothers

PRINCE CONSTRUCTION

virendra constructions

OM CONSTRUCTION CO.

Puja Traders