WBPHED/EE/AMD/ NIeT-10of 2025-2026/6

Amount

Illumineries and other electrical accessories portion:- Supply , delivery of the following material at site :-

a )Supply & delivery and storage at site 7.0 m Swaged Type Street Tubular Pole (M.S) complete with all accessories like Base Plate, Cap & 1.0 m M.S Single arm bracket generally conforming to IS: 2713-1980 and as per technical specification given bellow :- Over all length - 7.0 M Length x out side dia. X thickness of different section :Bottom 4M x 114.5mm x 4.50mm - Middle 1.5M x 88.9mm x 4.05mm - Top 1.5M x 76.1mm x 3.25mm. - The above pole is provided with suitable size base plate & 1.0 m long of 40mmdia. M.S. Following Double Arm Brackets and pole as per designation 410-SP-02 & conforming to relevant I.S. ( Make:Approved Make). T.C. Needed.

70 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Make-Approved Make).

30 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Make-Approved Make) (For Centrifugal pump House).

4 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.( From PDB Panel feeder to Busbar Chamber at Meter / Rest Room)(Make:- Approved Make)

3 CoreX 2.5 Sqmm industrial flexible copper cable wire/dia-30/0.25 PVC insulated with PVC sheathed.(Make:Approved Make) (For 01 Nos New Pole).

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below,Comprising of one 250 V,15 A Kit-Kat fuse unit, one NL on,porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1)after dismantling the damaged looping cable box etc. where necy. incl. painting.

200 x 150 x 100mm. (For 01 Nos New Pole & 4 Nos for existing Pole Light).

Connecting the pole to earth busbar including S & F GI (Hot Dip) wire of size as below,spiral on pole body as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages.

No. 12 SWG.

Earthing with GI earth spike(1822mmX20 mm) and grouted the same under the ground level as per direction.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

For 4 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting . (1 Nos for fitting with Single arm bracket on Top of the Roof Wall For Centrifugal Pump House).

Fitting & fixing of the outdoor lighting luminaries along with new & old accessories to the pole and sub-station building etc as per direction of EIC. (1 For New Pole).

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly a) Upto 9.0 mtr. Size 0.6x0.6x1.70 mts (01 Nos New Street Light)

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box. (01 Nos New Street Light).

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. A) Upto 9.0 mtr. long pole. (01 Nos New Street Light).

i) 1st coat of aluminium paint over 1 coat of RO priming

ii) 2nd coat of aluminium paint over 1st coat

Supply & Delivery of 3 Blade 300 mm Sweep Wall fan, 220V-240V,50 Hz,AC.(Make:-Approved Make)(For Panel Room & Pump House) (Model-Swing HS Off-White, Make- Havells)

Supply & Delivery of 4 ft. long 22 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps.(Make-Approved Make) (1 Nos Each For Panel room & Pump House )

Fixing only Wall fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.

Supply and delivery 80mm dia cast iron double flanged 3 Phase Actuator Operated Wafer type butterfly valve having body of cast iron as per 1S:210 gr. FG-260, disc of SS Gr CF-8, Shaft of St.steel AISI-410,‘O’ ring for shaft seal of Nitrile rubber, valves are suitable for PN 1.0 rating as per IS 13095 IP-68(Make approved make) TC needed for valve.

8 Core X 1.5 Sqmm copper control cable for actuator motor.(Make-approved make)

Supply and delivery of 100 Amp Male female KitKat fuse unit.

Supply, Delivery and storage at site of Uninterruptible Power Supply (UPS) as per IS 16242 (part-1) with overload protection, micro controller based, boost & buck AVR having following specification:- Capacity- 600VA / 360W, Input- 230V AC, Single phaseFrequency- 50/60Hz; Out put- 230V+/- 10% (AC mode) (Schneider - APC-Back UPS) (BX600C-IN) (For Flow meters & Level Meter)

Fitting & fixing of the Newly Supplied 80mm dia cast iron double flanged 3 Phase Actuator Operated Wafer type butterfly valve including Jointing and Laying of the Cable with complete connection also Refitting the existing Male female KitKat fuse after dismentaling the old and damaged item as per direction of EIC.(Sl. No. -15 to 17).

Making Earthing arrangement :-

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:By ISI-Medium GI pipe.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Extra for treatment of soil by using salt & charcoal or coke for plate electrode.

Connecting the equipments body to earth busbar including S & F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Add GST @ 18%

Add CESS @ 1%

M/s. SOMA ENTERPRISE (BID ID -6549835)

Ciemenics (BID ID -6551979)