Extension of first floor at NSS Bhavan at VTU, Jnana Sangama, Belagavi. (2nd Call)

Extension of first floor at NSS Bhavan at VTU, Jnana Sangama, Belagavi. (2nd Call)

code01 Demolishing R.C.C. work manually/by mechanical means including stack- ing of steel bars and disposal of un serviceable material to the appropriate disposal area as per direction of Engineer-in-charge. 30.00 Cum

code02 Providing and laying in position Cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per... 21.00 Cum

code03 Providing and laying in position Cement concrete for all Super structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height.... 114.50 Cum

code04 Formwork, Centering & Scaffolding for Sl No 9 RCC Columns (at 70 percentage of Finished Rate) Ground Floor. Providing and laying in position Cement concrete for all Super structures of building , Road... 114.50 Cum

code05 Providing and laying in position Cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap... 152.00 Cum

code06 Formwork, Centering & Scaffolding for Sl No 14 : beam & lintels of buildings As per Addendum-I in Volume-1 of page No.-112 (at 60 percentage of Finished Rate). Ground Floor Providing and laying in pos... 152.00 Cum

code07 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 6.00 Cum

code08 Formwork, Centering & Scaffolding for Sl No 19 : Chejjas, Canopy & Other Architectural projections of minor sections As per Addendum-I in Volume-1 of page No.-112 (at 45 percentage of Finished Rate)Fi... 6.00 Cum

code09 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 190.00 Cum

code10 formwork, Centering & Scaffolding for Sl No 15 : RCC Roof Slab of buildings As per Appendix-I in Volume-1 of page No.-112 (at 50 percentage of Finished Rate) First Floor. Providing and laying in posit... 190.00 Cum

code11 Providing and laying in position Cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra... 14.00 Cum

code12 Formwork, Centering & Scaffolding for Sl No 16 : Staircase and other similiar structure As per Addendum-I in Volume-1 of page No.-112 (at 50 percentage of Finished Rate) Ground FloorProviding and lay... 14.00 Cum

code13 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin... 71.00 Kg

code14 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement :... 290.00 Cum

code15 Providing Half Brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level Cement mortar 1:4 (1 cement : ... 400.00 Sqm

code16 Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185(Part III) in super structure above plinth level up to floorIlevelwithRCCbandat sil... 51.00 Cum

code17 Providing and laying in position Cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from ... 27.50 Cum

code18 Providing 12mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth ren... 1050.00 Sqm

code19 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi... 2119.00 Sqm

code20 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor... 2022.00 Sqm

code21 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions ... 231.00 Kg

code22 Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ... 500.00 Mtr

code23 Providing and fixing plaster mesh 150 mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for s... 1448.00 Mtr

code24 Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ... 60.00 Sqm

code25 Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai... 539.00 Sqm

code26 Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 percentage and conforming to IS: 15622, of approved brand & manufacturer, in all col... 100.00 Sqm

code27 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e... 54.00 Sqm

code28 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t... 206.00 Sqm

code29 Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi... 17.00 Sqm

code30 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m... 700.00 Sqm

code31 Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c... 11.50 Sqm

code32 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge 220.00 Mtr

code33 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si... 2.40 Cum

code34 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani... 28.00 No

code35 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden fram... 48.00 Sqm

code36 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio... 86.00 Mtr

code37 Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi... 27.00 Sqm

code38 Providing & fixing of 2 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 22.00 Sqm

code39 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome... 33.00 Sqm

code40 Providing & fixing of Openable window made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPV (Thermo Plastic Vulcanized) and lead fr... 44.00 Sqm

code41 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead f... 14.50 Sqm

code42 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi... 1870.00 Kg

code43 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp... 3200.00 Sqm

code44 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls at 1.25 L/10 m square over and including one c... 3200.00 Sqm

code45 Finishing walls with 100 percentage Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint o... 4500.00 Sqm

code46 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90 ltr/10 m square over an under coat of primer applied at 0.75 ltr/10 m² of approved brand and manufacture... 204.00 Sqm

code47 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied at 0.90 ltr/10 m square over an under coat of primer applied at 0.80 ltr/10 m² of approved brand and manufa... 503.00 Sqm

code48 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti... 170.00 Kg

code49 Providing and fixing IS12817 marked stainless steel butt hinges with stainless steel screws etc. complete 125x64x1.90mm. 120.00 No

code50 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete 20.00 No

code51 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Tower Bolts 250x10mm 40.00 No

code52 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 300mm 30.00 No

code53 Providing an dfixing door latch with necessary screws etc complete. Bright finished brass latch 30.00 Each

code54 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge. 200mm length 30.00 No

code55 Providing and fixing bright finished brass handles with screws etc. com- plete: Brass handles125 mm with plate175x32mm 30.00 Each

code56 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm),... 16.00 No

code57 Hold Fast 80.00 No

code58 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv... 800.00 Kg

code59 New Terrace waterproofing Surface preparation like Removing the dust particles ,chipping, grinding and washing.Expanding the major crack's with cutter machine and crack filling with Epojit-LV Bonding ... 1140.00 Sqm

code60 Protection screed is compulsory on waterproofing coating With sand, cement, aggregate and chemical (Mapeplast super and Planicrete SBR) Screeding Work roofing for weather proof course with 12mm down s... 1024.00 Sqm

code61 WATER SUPPLY WORK

Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this incl... 100.00 Mtr

code62 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this includes jointing of p... 100.00 Mtr

code63 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings,this includes jointing of p... 100.00 Mtr

code64 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe w... 80.00 Mtr

code65 Providing and fixing Chorinated poly venyl cloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe w... 80.00 Mtr

code66 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore 10.00 No

code67 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore 10.00 No

code68 Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore 10.00 No

code69 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g. 25.00 No

code70 Cutting holes up to 15x15cm in R.C.C floors and roofs for passing drain pipe etc., and repairing the hole after insertion of drain pipe etc., with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 gr... 120.00 m

code71 Cutting holes up to 30x30cm in walls including making good the same with common burnt clay F.P.S (non modular) bricks 100.00 Each

code72 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 35.00 No

code73 Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class.a. Economy 15.00 No

code74 Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete 20.00 No

code75 Providing and fixing PTMT grating of approved quality and colour Rectangular type with openable circular lid 20.00 No

code76 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint... 80.00 Mtr

code77 Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint... 100.00 Mtr

code78 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring confirming to IS : 5383, leaving 10mm gap for termal expan... 80.00 Mtr

code79 Providing and placing on terrace, (at all floor levels) polyethylene water storage tanks IS : 12701 marked with cover and suitable locking arrangements, and making necessary holes for inlet, outlet an... 5000.00 l

code80 Supplying, fixing, testing and commissioning of portable Water Cooler (Floor mounted model) in corridors for drinking water with all the necessary accessories etc. Make: Kent/Aquaguard or equivalent. 1.00 No

code81 SANITORY WORKS

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with f... 10.00 Each

code82 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co... 5.00 Each

code83 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w... 12.00 Each

code84 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with t... 10.00 Each

code85 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ... 5.00 Each

code86 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular... 10.00 Each

code87 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover 180 x 150 mm size P type & With Non Modular common burnt clay ... 10.00 Each

code88 Providingand fixing CP Brass 32mmsize BottleTrap of approved quality & make and as per the direction of Engineer-in-charge. 18.00 Each

code89 ELECTRICAL WORKS Supplying heavy gauge PVC Conduit Pipe dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J... 800.00 Mtr

code90 25mm dia 2mm thick 1600.00 Mtr

code91 32mm dia 2.5mm thick 200.00 Mtr

code92 Supplying heavy gauge PVC Conduit Pipe dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plas... 180.00 Mtr

code93 25mm dia 2mm thick 120.00 Mtr

code94 40mm dia 2mm thick 20.00 Mtr

code95 Supplying PVC or GI flexible conduit pipe mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300m... 10.00 Mtr

code96 25mm 10.00 Mtr

code97 Supplying And Fixing Metal Fan Box with Round Hook. 50.00 No

code98 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated coppe... 50.00 Point

code99 Medium point above 3Mtr upto 6Mtrfrom tapping point to out let via switch 50.00 Point

code100 Long point above 6Mtr upto 1OMtr from tapping point to out let via switch 100.00 Point

code101 Two outlet in a row, above 3Mtr upto 6Mtr from tapping point to out let via switches. 50.00 Point

code102 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS... 2900.00 Mtr

code103 2.5 Sqmm Copper wire 2800.00 Mtr

code104 4.0 Sqmm Copper wire 1300.00 Mtr

code105 6.0 Sqmm Copper wire 350.00 Mtr

code106 Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall. ... 60.00 Each

code107 4-5 Way 50.00 Each

code108 6Way 50.00 Each

code109 8Way 50.00 Each

code110 10-12Way 50.00 Each

code111 Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary raw1 plugs, Machine/N... 2.00 Each

code112 3Way 2.00 Each

code113 4-5Way 3.00 Each

code114 6Way 5.00 Each

code115 8Way 1.00 Each

code116 Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m... 60.00 Each

code117 3Module 30.00 Each

code118 4 Module 50.00 Each

code119 6 Module 50.00 Each

code120 8 Module 50.00 Each

code121 10-12 Module 50.00 Each

code122 Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Make: Anhcor/Crabtree/Legrand a) 1-3 Module 6Amps one way Switch 200.00 Each

code123 6Amps Two way Switch 70.00 Each

code124 6Amps 3way socket 100.00 Each

code125 Stepped Fan Regulator. 50.00 Each

code126 16Amps one way switch 50.00 Each

code127 6Amps Bell push 1.00 Each

code128 32Amps DP switch 7.00 Each

code129 6/16Amps universal socket 55.00 Each

code130 TV/Telephone socket 10.00 Each

code131 Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size mm conduit using necessary machine screws. Make: Anhcor/Crabtree/Legrand a)80mm 40.00 No

code132 110mm 50.00 No

code133 Supplying and fixing regular double door MCB distribution boards on wall I wood board I flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacit... 2.00 Each

code134 4Way TP &N 2.00 Each

code135 Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit ... 70.00 Each

code136 6-32Amps DP 2.00 Each

code137 40Amps DP 1.00 Each

code138 40 Amps TPN 3.00 Each

code139 50-63Amps TPN 3.00 Each

code140 Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/panel board. Make: Anchor or Crabtree or Legrand

a) 25 Amps 2 pole 2.00 Each

code141 40 Amps 4 pole 2.00 Each

code142 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. Make: Finolex or as approved by the Engineer-in-charge

a) 1 Pair 120.00 Rmtr

code143 2 Pair 200.00 Rmtr

code144 5 Pair 100.00 Rmtr

code145 Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection ... 1.00 Each

code146 125 Amps 25kA 1.00 Each

code147 Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leak... 1.00 Each

code148 Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4... 1.00 Each

code149 Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. 6.00 Each

code150 Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. 2.00 Each

code151 Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A C. 50 Hz 12/24v D.C. 9.00 Each

code152 Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) up to63 amps. 3.00 Each

code153 Supplying of 63 amps Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947. 63 amps. 1.00 Each

code154 Supplying and fixing HRC fuse units base on existing switch/panel board. 32 to 63 amps. 1.00 Each

code155 Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 Amps. 1.00 Each

code156 Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs... 2.00 Each

code157 Fixing of Amps TPST or change over switch or Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling.15A to 63A TPDTICOS. 10.00 Each

code158 100 A to 250 A TPDTICOS 2.00 Each

code159 Supplying and fixing angle iron frame work fabricated out of M.S. angle iron and M.S. flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6... 80.00 Mtr

code160 50x50x6mm 100.00 Mtr

code161 50x100x50x6mm C channel 50.00 Mtr

code162 Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS 1554 Part-1 or IS 7098 Part 1, Armouring strip thickness in average plus ... 25.00 Mtr

code163 3.5 core 35 square mm 35.00 Mtr

code164 3.5 core 50 square mm 100.00 Mtr

code165 Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe or stoneware pipe or on wall or on pole as required. In existing trench or duct. 6 square mm to 16 square mm On wall or ... 160.00 Mtr

code166 25 square mm to 75 square mm 5.00 Mtr

code167 Digging of trench of 0.6m deep x 0.50m wide refilling the trench to the required ground level and consolidating etc. complete. In soil (ordinary) 100.00 Mtr

code168 Providing and laying in position 1OOmm dia stone ware pipe in existing trench. 30.00 Mtr

code169 Supplying and fixing of class A medium duty GI pipe of wall thickness not less than 3.25mm on pole or wall or drain crossing with necessary clamping arrangements for UG cable of 1.1

KV 50mm 10.00 Mtr

code170 Supplying and fixing L.T cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen or insulating compound complete with terminals, clamps, bolts, nuts and washers etc. 95... 1.00 Each

code171 Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class metal only

32mm dia 2.00 Each

code172 Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.150x50mm 10.00 Mtr

code173 300x50mm 5.00 Mtr

code174 Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm 2.00 Each

code175 35 sqmm Long Barrel 2.00 Each

code176 50 sqmm Long Barrel 2.00 Each

code177 Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas or spacers etc. 8S WG GI Wire 10.00 Mtr

code178 Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70 percentage lumen maintenance with CRI greater than 80. Power Input 220 ... 30.00 Each

code179 LED light fighting 1 x 4 feet 20 or 22 w 70.00 Each

code180 LED light fighting 2x 4 feet 36 or 40 w 5.00 Each

code181 Supply of round surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector and has swivelling unit... 15.00 Each

code182 LED square or round down light 10 to 12W 20.00 Each

code183 LED square or round down light 15 to 18W 50.00 Each

code184 Supplying of surface mounting non integral type LED w lumina ire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEOs with CCT 6500 de... 10.00 No

code185 LED modular down light 2x2 feet or 1x4 feet 34 to 36watt 30.00 No

code186 LED modular down light 2x2 feet or 1x4 feet 42 to 55 watts 20.00 No

code187 Supplying exhaust fan of 1440 RPM of 300mm (12inch sweep) size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply. Make: Bajaj, Crompton Greaves, Havells, Usha 20.00 Each

code188 Supplying capacitor type ceiling fan (5 star rating) complete with down rod blades, shackle,canopies etc, for operation on 230 volts, 50 cycles.Single phase AC supply conforming to ISS 374 to 1979 ... 20.00 Each

code189 56 inch Sweep (1400mm) Regular model 20.00 Each

code190 Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply. Make: Bajaj, Crompton Greaves, Havells, Usha 300mm Sweep 2.00 Each

code191 400mm Sweep 3.00 Each

code192 Fixing all types and all capacities of fluorescent I false ceiling I spot light CFL I LED fittings indoor on the wall or ceiling, rafters, girders using 23 by 0.0076 inch twin twisted PVC insulated ... 2.00 Each

code193 Using necessary length of G.I. chain 1.00 Each

code194 Using 1 Mtr long 19mm 18 SWG enamelled brazed conduit of two nos. rod pendent with ball socket with check nuts all nickel plated. 5.00 Each

code195 Using 2 Mtr long 19mm 18 SWG enamelled braised conduit of two nos. rod pendent with ball socket with check nuts all nickel plated. 20.00 Each

code196 Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar... 20.00 Each

code197 Fixing a ceiling or wall mounting fan of all capacities and all types, with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary ... 25.00 Each

code198 Extra length of GI pipe of class B 19mm dia for down rod. 20.00 Mtr

code199 Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. 20.00 Each

code200 Supplying and Fixing mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV, SV, MH, FTL stree... 20.00 Each

code201 Supplying and drawing UTP-CAT 6E LAN cable. Make: D-Link, Molex, Systimax 1220.00 Mtr

code202 Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. Make: Finolex or as approved by the Engineer-in-charge

a) 5 Pair 500.00 Mtr

code203 Supplying & Fixing of 12U with 450mm depth switch mounting rack with power manager & Cable manager. Make: Netwack or Valrack 1.00 Each

code204 Supplying and fixing of 24 Port Gigabyte (manageable) POE Network Switches Make: DLink or Cisco or HP 1.00 Each

code205 Supplying & fixing of single IO socket with back box Make: D Link or Molex or Systimax 10.00 Each

code206 Supplying & fixing of double IO socket with back box Make: D-Link, Molex, Systimax 5.00 Each

code207 Supplying & Fixing of 1 Mtrs Cat 6 Patch Cable Make: D-Link, Molex, Systimax 20.00 Each

code208 Supplying & Fixing of 24 Port 10/100/1000 patch panel EachPatch panel for LAN cabling. Make: DLink, Molex, Systimax 2.00 Each

code209 Supplying and fixing of 10 pair MDF krone junction box with KRONE Module or Telephone cable termination.Make: As approved by the engineer-in-charge 1.00 Each

code210 Supplying litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper or SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M... 5.00 Each