ADDITION ALTERATION TO BLDG NO.65,66,67 AND 68 AT 6TTR PONDA GOA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tile to store and rubbish off the premises complete all as specified and directed .

Demolition of PCC not exc 15cm thickness ( below and above ground level ) including floor finishes complete all as specified and directed.

M & L for 75mm cement concrete type D2, 1:4:8 using 40mm graded aggregate as in sub base of floor complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type C2, using 40mm graded stone aggregate as in plinth protection, surface finished even and fair without using extra cement complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and beewax polishing and 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for Coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match,including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab in riser of steps, skirting, dado 20-25 mm thick on vertical wall surface over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror wax polishing complete with 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for coloured glazed ceramic tiles 300mmx200mmx6-7mm set & jointed in neat cement slurry and pointed in neat cement slurry and pointed in coloured cement to match over 10mm thick plastering in CM 1:4 as a backing coat of vertical surface complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1, (20mm graded aggregate) as in copings, include for use of formwork complete all as specified and directed.

Demolition of brick work or stone/boulder masonary, built in cement mortar including all quoins,arches,pillars,etc. complete all as specified and directed.

M & L for walling laterite of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed. (Note -The rate consider is for laterite stone only as per section No.6 stone masnory para - 6.2.4 of SSR 2010 PART 2)

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of squared rubble masonary regular coursed complete all as specified and directed.

M & L for 15mm thick plastering in CM 1:4 on external surfaces stone or concrete surfaces with using water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note :- Water proofing compound measured and paid seperately

M & L for rendering 15mm thick on masonary surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster in any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of new surface or unplastered surfaces of wall with applying 3mm thick wall care putty complete all as specified and directed.

M & L preparation of newly plastered surfaces and applying three coat of white wash on walls complete all as specified and directed.

M & L applying two coat of weather proof acrylic emulsion exterior paint over a coat of weather proof acrylic emulsion exterior primer on newly plastered surfaces complete as given in particular specifications and all as specified and directed.

M & L preparation of old plastered surfaces of wall including corners etc by brooming down or steel wire brushing and applying one coat of white wash on walls complete all as specified and directed.

M & L for complete removal of existing treatment including preparation surface by washing, rubbing down applying two coat of weather proof acrylic emulsion exterior paint over a coat of weather proof acrylic emulsion exterior primer complete as given in particular specifications and all as specified and directed.

M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of old decorated surfaces of wall with applying 3mm thick wall care putty by complete removal of existing treatment complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store of bore of pipe 20mm complete all as specified and directed.

Supply and fixing galvanised tubing medium grade 15mm bore with fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Supply and fixing galvanised tubing medium grade 20mm bore with fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Supply and fixing of bib cock brass CP 15mm bore in repairs fancy type, chromium plated complete all as specified and directed.

Supply and fixing of soap dish vitreous china coloured approximate size (160mmx160mmx90mm) fixed in repairs complete all as specified and directed.

Supply and fix in repairs PVC flushing cistern 10 ltr capacity low level with inlet ball valve float and handle including brackets and flush pipe 32mm dia PVC for low level PVC flushing tank complete all as specified and directed.

Supply and fixing stop valve fancy type 15mm bore complete in repairs complete all as specified and directed.

S & F PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed

Supply and fixing of brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges fixed in repairs complete all as specified and directed.

Supply & Fix in repairs white vitreous china squatting pan orissa pattern of size 580mm x 440 mm, with integral foot rest and P or S trap connection to trap and to flushing pipe front or back inlet including, trap and taking out old WC & connections and (demoltion of concrete considered in item No 2) complete all as specified and directed

Supply & Fix 110mm PVC (SWR) WC connector with lip ring complete all as specified and directed

Supply and fix PVC SWR floor trap plain with grating including jointing with solvent cement, dia of outet 75mm complete all as specified and directed

Supply and fix in repairs urinal bowl type complete including providing and fixing plug bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screws pointing around urinal back in cement, including 15mm brass stop cock and waste coupling brass CP, (Urinal bowl flat back size of 465x355x265mm) white, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed

S & F in repair vitreous china wash basin, white flat back size 550 x 400mm including brackets,cutting for and pinning in ends of brackets and brass CP waste fittings etc complete; fixed in repais complete all as specified and directed

S & F in repair pillar taps, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe of bore 15mm complete all as specified and directed

S & F high density polythylene pipe (HDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceiling or in trenches or floors etc bore of pipe 32mm complete all as specified and directed

Taking up or down, CI pipes with fittings from wall 100mm/75mm bore with connections complete all as specified and directed

Supply and fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid under floor of 110 mm dia jointed with solvent cement complete all as specified and directed

Supply and fix PVC (SWR) pipes single socketed in any length fixed to wall or laid under floor of 75 mm dia jointed with solvent cement complete all as specified and directed

Supply and Fix PVC(SWR) bends with access door any, radius 110 mm bore complete all as specified and directed

Supply and Fix PVC(SWR) bends with access door any, radius 75 mm bore complete all as specified and directed

Supply and fix PVC (SWR) vent cowl 110mm Dia complete all as specified and directed

Supply and fix PVC (SWR) vent cowl 75mm Dia complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frame) but exceeding 1.5 Sqm and not exceeding 4.00 Sqm each complete all as specified and directed

Taking down shutters of any description but exc.1.00 Sqm and not exc. 2.00 Sqm each and refixing in same opening complete all as specified and directed .

S & F second class hard wood plain solid straight chowkats and frames, worught framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed .

Supply and fix 35mm thick factory made 2nd class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 12mm thick timber flat on both sides of veneered particle board medium density BWP confirming to IS 3097 exterior grade solid core with commercial face veneers both faces supplied and fixed to chowkats. The size of style and rail as per IS 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed

S&F aluminium anodized window shutter including frame having three track; two carries glass shutter and one carries mosqueto net shutter, any type (sliding or open-able ) with frame , & other similar work etc fabricated by using the JINDAL / CENTURY section including necessary arrangement for sliding and locking & to receive 4mm thick sheet glass or wire mesh with aluminium channel beading & stainless steel screws including the cost of rubber gasket / rubber beading and all necessary fitting etc complete . But the weight of the rubber gasket / beading will not be measured with weight of aluminium shutter complete all as specified and directed Note :- Sheet glass & wire mesh shall be measured & paid separately

Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube all as per specification & drg. complete all as specified and directed

Supply and fix factory made solid panel PVC door shutter 30mm thick (styles) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PCV Channel having a PVC sheet strip of 20mm width stuck inside with solvent cementfor styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitten in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading & jointed together with solvent cement, complete all as specified and shown in drawing complete all as specified and directed

Supply and fix of butt hinges 100mm long stainless steel of approved quality with ISI mark complete all as specified and directed

Supply and fix of aluminium sliding door bolt with hasp & staple bolt type & fixing clips sheet cast of extruded section and fixing bolts 300mm size complete all as specified and directed

S & F aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and directed

S & F aluminium anodised handles of size 150mm long extruded fabricated type complete all as specified and directed

Supply and fix alumunium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.40mm fixed with alu. Wire staple, necessay packing & fittings etc.complete all as specified and directed

M & L preparation of new wooden surface and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and directed

M & L preparation of old wooden surface and applying one coats of synthetic enamel paints of any description not otherwise described over 10cm width or girth complete all as specified and directed

Preparing of surfaces of wood and wood based material new or old treated with tar or coal tar black paint treating ends of posts, back of chowkats etc are tarred exc 0.1 Sqm but not exc 0.5 Sqm each complete all as specified and directed

Preparing of surfaces of wood and wood based material new or old treated with tar or coal tar black paint treating treating small articles like hold fast, area not exc 0.10 sqm each complete all as specified and directed

Supply and fix flat iron (25x3mm) hold fasts confirming to Fe.290, Gde-E-165 complete all as specified and directed

Cutting holes in brick walls built in cement mortar for inserting hold fasts depth of embedded portion of hold fast n.exc half brick and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed .

Dismantling of asbestos cement sheets any corrugation including ridge as in roof covering complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as given in Particular specifcations and all as specified and directed .

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws and including valleys and gutters complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed .

M&L for rolled mild steel section as in main and cross beams, hip and jack rafter, purlins, coloumns where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates Fe-290 (Gde E-165) at any place and any height complete all as specified and directed by Engineer in charge.Note:-Ols steel will not be removed from roof trusses ,rafter and purlins etc of bldg Nos.65,66,67,68.Steel taken for welding steel flat of 75mmx6mm over existing tubes in purlins and for additional rafters,purlins,brackets and for extending the length of rafters ,purlins etc complete all as specified and directed.

Taking down roof trussess clear span above 4metres & up to 8 metres, coupled rafters or truss beam complete all as specified and directed.

S&F for Roof trusses (framed), trussed, purlins,main and cross beams, hip and jack rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, gusset plates, base plates, bolts etc. of Fe 410-W (Gde E-250) quality A complete all as specified and directed.

M & L for two coats synthetic enamel paint on steel surface on any description area 10 cm in width or girth inclduing preparation new or previously untreated surface, priming with red oxide primer complete all as specified and directed .

M&L for Preparation of old steel surfaces of any description exc 10cm width or girth and applying one coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Form work to sides and soffits of floor or roof beam, beam haunchings girders, lintels, cantilevers shelves including supports overhangs etc also splays between floors and beams etc. complete all as specified and directed .

Demolition of reinforced cement concrete of any description & in any position not otherwise provided specifically provided for complete all as specified and directed .

M & L for providing cement concrete in lintel upto 1.5M span, cills, steps, sesmic and other similar bands plinth coarses string coarses, bearing coarses, parapet and railing upto 60cm in height copings, kneelers, appex stones, bed plates, kerbs as type B1, 1:2:4 (20mm graded aggregate) complete all as specified and directed .

S & F steel deformed bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

S & F steel deformed bars but 6mm to 8mm dia in stirrups, bent to shape required including cranking, bending spirally for hooping ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fix in repair for mild steel work such as grills, gratings etc, with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, frame work of water tank, ladders barred iron door and similar work etc complete confirming to quality Fe-290 Grade-E-165 complete all as specified and directed .

Dismantling of ceiling boards of any description and at any position (fiber, pulp, insulation, etc.) or insulation boards/slabs/blankets any thickness, including cover fillets and grid frame work all as complete all as specified and directed .

S&F Anodised aluminium snap grid (605mm x 605mm) frame work with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including necessary bolts, nuts and washers for false ceiling complete all as specified and directed .

M&L for 6mm thick non asbestos fibre cement building building boards fixed or laid/ inserted to Aluminium framework with screws complete all as specified and directed .(Note:- Aluminium frame work considered in item No 83 above)

Cuting holes into or through brick/stone/ PCC block wall built in making good in cement mortar 1:3 superifical area exc 150 Sqcm but not exc 400 Sqcm complete all as specified and directed .

M&L for preparing new surfaces and applying two coat of oil emulsion on ceiling complete all as specified and directed by Engineer in charge.

Supply & fix sheet glass ordinary quality 3mm thick and glazed with oil putty or fixed with beads in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

Supply & Fix 3mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in suqares n.exc 0.5 Sqm in each pane complete all as specified and directed .

M&L Chequered cement coloured tiles 20x20x25mm thick set & jointed & pointed in neat cement slurry in floors complete all as specified and directed.

S&F roofing turbo ventilators top made up from aluminium with shaft of stainless steel and throat size 600mm fixed on sloping roof of any place and any height and of any description with necessary duct or shaft for connection between opening of false ceiling to roof top or up to turbo ventilators including all required equipments for cutting and sealing of roof top complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description.exc 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed .

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 type B1, 1:2:4 (20mm graded aggregate) complete all as specified and directed .

Material and labour for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed .

S&F Plain, Aluminium sheeting 0.71mm thick , Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) rain water gutter with proper slope on any shape and size at any height and place including fixing of iron brackets complete all as specified and directed .Note: Iron work measured and paid under relevant item mentioned above

M&L for old kota stone flooring including rubbing and beewax polishing complete all as specified and directed .

Dismantling of old stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed .

M&L for 25mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed .

M&L for 18-19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed .

M&L for Plain fillets square, rectangular or triangular in section n exc 3Sqcm, clean sawn, secured with nails or brads for shutters frames, chowkats, partitions, chalk board etc complete all as specified and directed .

M&L Plain fillets square, rectangular or triangular in section exc 13Sqcm but n exc 25Sqcm, clean sawn, secured with nails or brads for shutters and shelf beading, partitions, chalk board etc complete all as specified and directed .

M&L Plain fillets square, rectangular or triangular in section exc 6Sqcm but n exc 13Sqcm , clean sawn, secured with nails or brads for shutters and shelf beading,partitions ,calk board etc complete all as specified and directed .

S&F Aluminium anodised, barrel tower bolts of extruded section 100mm long complete all as specified and directed .

S&F 75mm Hasp and staple, safety type, aluminium including bolt to hinge plate and fixed with screws complete all as specified and directed .

S&F non magnetic type green writing ceramic chalk board of any size with wooden framing necessary arrangement for hanging complete all as specified and directed .

Taking down carefully copper/aluminium point wiring of light, fan, socket 5/15A or power point complete including fittings such as switches, ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, tube light fittings etc including switch boards and making good disturbed surfaces of wall/ceiling etc so as to match with the existing wall/ceiling/floors etc complete all as specified and directed .

Taking down carefully sub main wiring including copper/aluminium/GI earth continuity conductor and making good disturbed surfaces all as directed of any sizes complete all as specified and directed .

Taking down MCB DBs with MCBs of any size and capacty alongwith teadwood boards incl all fittings/furniture carefully and making good disturbed surfaces of wall complete all as specified and directed .

M & L for point wiring complete on wall & ceiling/roof with necessary fixing arrangements with stranded PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including white / ivory colour PVC casing and capping ISI marked of suitable size with all acessories/ fittings including PVC board for fixing of switches / sockets, fan regulators etc including PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing wire connected with earth doly, including making good the disturbed surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces complete all as specified and directed .

For one light point controlled by one switch.

For one ceiling/exhaust fan, point controlled by one switch.

For one 5Amp independent socket point controlled by one switch.

For one 5A socket point controlled by one switch on same board

All as per item No 110 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed .

M & L for switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified and directed .

M & L for switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified and directed .

M&L for socket outlet 5 pin, 5 Amps flush type white finish complete all as specified and directed .

S&F socket outlet 2 in 1, 5 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified and directed .

S&F electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified and directed .

S&F ceiling rose, surface backlite, 65 x 20 mm three terminal complete all as specified and directed .

S&F lamp holder insulated body with back plate suitable for angle / batten fitting complete all as specified and directed .

S&F double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on wall in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed .

All as per item No 123.00 above but vertical typeTPN 4way, 415 volts complete all as specified and directed .

S&F, testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-series connected with suitable lugs complete all as specified and directed .

All as per item No 125.00 above but with SPN 40 Amps complete all as specified and directed .

S&F of MCCB TPN 63 Amps 415 V 25 KA, with adjustable thermal release (to be fixed in item No 124.00 above) complete all as specified and directed .

M&L sub main wiring with two single core PVC-FRLS insulated unsheathed stranded copper conductor cable of size 6sqmm drawn in casing capping with 6Sqmm PVC-FRLS insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified and directed . Note : (i) Two single core cable and one run of earth copper conductor/Casing capping will be measured and paid as one unit length

M&L sub main wiring with two single core PVC-FRLS insulated unsheathed stranded copper conductor cable of size 4 sqmm drawn in casing capping with 4 Sqmm PVC-FRLS insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified and directed . Note : (i) Two single core cable and one run of earth copper conductor/Casing capping will be measured and paid as one unit length

M&L for Earthing complete with M.S. galvanized earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below normal GL) with top edge of the plate not less than 1.5M below normal GL, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel incl excavation, PCC (1:3:6) type C-1 chamber with RCC cover (1:2:4) type B0, 40 mm thick reinforced with 6 mm dia bar, 3 Nos. both way, 15 mm dia light grade GI protection pipe, funnel with wire mesh,watering pipe of size 20 mm dia med. grade, lugs, main Earthing lead upto 7.5 mtr incl. Charcoal dust, salt etc. all as shown in electrical plate No. 5 of SSR Pt-I 1991 specification complete all as specified and directed .

M&L for cutting / boring of PCC/hard standing at a depth not more than 15 cm deep and 15 cm in breadth for passing earthing conductor and making good the disturbed surfaces with PCC (1:2:4) type B-0 or cement mortar (1:3) complete all as specified and directed .

Supply and fixing of GI pipe light grade of size 15 mm bore for laying in trenches/floors or walls including all fittings for protection of earth lead wire complete all as specified and directed .

M&L for earth continuity conductor or main earthing lead 4 mm dia GI or steel wire fixed to wall on batten or recessed or buried in ground or drawn in conduit/pipe all as required at site complete all as specified and directed .

S & F 18/22 watt LED natural daylight tubelight. Made up of CRCA sheet steel,epoxy powder coated of IP20.MAKE:HAVELLS-LHDF14118030 including LED Tube Rod 18 Watts or equivalent of makes given in Appc 'C complete all as specified and directed .

S & F security light for ENDURA PEARL energy saving & environmental friendly long life LED light made up of pressure Versatile die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK07 of capacity 15W LED 5700K LHETBXU7IA6S015 of Make Havells or eequivalent of makes given in Appc 'C' complete all as specified and directed .

M&l for bracket made out of GI pipe 25mm dia medium grade, 1.2mtr long bent to shape with MS flat iron clamps made out of 40mmX 6mm thick FI nuts, bolts incl. taking down old unsv complete all as specified and directed .

Supply and fix exhaust fans AC single phase 230/240 V of size 380 mm sweep with louvre complete all as specified and directed .

Supply and fix LED bulb of 15 watt of havells cat part no LHLDEREEMK8X015 OR equivalent of makes given in Appc 'C complete all as specified and directed .

Supply and fix LED panel recess type suitable to fit on false ceiling of 34watt of havells cat part no PLUTONEO2X2PLR34WLED840S including LED bulb of 15 watt of havells cat part no LHLDEREEMK8X015 OR equivalent equivalent of makes given in Appc 'C complete all as specified and directed .

M & L for Taking down carefulley old serviceable Ceiling fan in any position after disconnection of all electrical connections, stacking at site for use and Re-fixing the same by providing new ceiling fan down rod made up of 15 mm GI tubing med garde up to 1.5 Mtr long (as required at site), threadded, welded and making necessary fixing arrangements like fan hook, clamps, Bolts and nuts complete required at site including provision of 3 core flexible wire connected from ceiling rose to ceiling fan and testing complete all as specified and directed .

SHREE THATWAMASSY CONSTRUCTIONS PRIVATE LIMITED

SURAT SINGH AND SONS

SACKSON ENTERPRISES

United Sales Corporation

M/s. P S REDDY

nhsaluji and associates

M/s Kishan Gopal Agarwal

agarwal and company