Disable Day Care Centre at Kalaburagi City Under KKRDB Macro for the Year 2024-25(KLB2412113792)

Earth work in surface excavation by mechanical means for lowering & leveling

the ground for all works other than foundation in all kinds of soils & upto depth

not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all

works & depth upto 3 m, as per drawing and technical specifications,

including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for Foundation upto Plinth add 8%

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and injecting chemical emulsion for Pre-constructional

Anti-Termite Treatment, creating continuous chemical barrier under

and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) add 70%

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for Plinth Beams of Buildings add 50%

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts add 60%

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slabs add 50%

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for Chejjas, Canopy & Other Architectural projections of minor sections add 45%

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

fine sand) on concrete surface / ceilings including rounding off corners

wherever required smooth rendering, providing and removing s...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement:

3 coarse sand) finished with a floating coat of neat cement on the rough

side of single or half brick wall including rounding off corne...

Providing and laying vitrified floor tiles with thickness 9-10 mm in

different sizes with water absorption less than 0.08% and conforming to

IS: 15622, of approved make, in all colours and shades, lai...

Providing and fixing 1st quality ceramic glazed floor tiles conforming to

IS : 15622 (thickness to be specified by the manufacturer ) of approved

make in all colours, shades except burgundy, bottle gr...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm

thick on 10mm thick cement plaster 1:3 and jointed with white cement

slurry over existing rough plaster surface using glazed t...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi

chambered UPVC(Matching to RAL-9016) sections and with minimum

TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing Honne wood frames of doors, windows, clerestory windows,

ventilators and other frames, wrought, framed or assembled including

making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing with Deluxe Multi surface paint system for interiors and exteriors

using Primer as per manufacturers specifications: Two coats applied on

walls @ 1.25 L/10 m² over and including one coat of...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing hand rail of approved size by welding etc. to steel

ladder railing, balcony railing, staircase railing and similar works,

including applying priming coat of approved steel primer....

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Providing and fixing Towel rail 600mm length with hooks made of

Stainless steel with all concealed fitting arrangements & all necessary

accesories complete - Class Economy

Providing and fixing Towel rail 600mm length with hooks made of

Stainless steel with all concealed fitting arrangements & all necessary

accesories complete - Premium

Providing and fixing Soap dish wired with 200mm width made of Stainless

steel with all concealed fitting arrangements & all necessary accesories

complete - Class Economy

Providing and fixing Soap dish wired with 200mm width made of Stainless

steel with all concealed fitting arrangements & all necessary accesories

complete - Class Premium

Providing & supplying Tumbler holder of Stainless steel 304 grade as

per direction of Engineer in charge of work

Providing & supplying Stainless Steel Tumblers with 150ml capacity

as per direction of Engineer in charge of work

Providing & supplying Napkin holder of radius made of Stainless steel

304 grade as per direction of Engineer in charge of work

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3

coarse sand) finished with a floating coat of neat cement to brick masonry

including rounding off corners wherever required smooth re...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) add 70%

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts add 60%

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slabs add 50%

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

fine sand) on concrete surface / ceilings including rounding off corners

wherever required smooth rendering, providing and removing s...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement:

3 coarse sand) finished with a floating coat of neat cement on the rough

side of single or half brick wall including rounding off corne...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing with Deluxe Multi surface paint system for interiors and exteriors

using Primer as per manufacturers specifications: Two coats applied on

walls @ 1.25 L/10 m² over and including one coat of...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying water proofing treatment to the Roof with PU based

single component elastomeric pure polyurethane based coating on New

terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6

mm angle iron and 3 mm M.S. gusset plates at the junctions and

corners, all necessary fittings complete, including applying a primi...

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3

coarse sand) finished with a floating coat of neat cement to brick masonry

including rounding off corners wherever required smooth re...

WATERSUPPLY AND SANITARY

Providing and fixing white vitreous china pedestal type water closet

(European type) with seat and lid, 10 litre low level white vitreous china

flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the w...

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore

Bottle trap 31mm single piece moulded with height of 270 mm, effective

length of tail pipe 260 mm from the centre of the waste coupling, 77 mm

breadth with 25 mm minimum water seal, weighing not less ...

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete : 20 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of

approved quality (screwed end) : 32 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality

(screwed end) : 25 mm nominal bore Horizontal

Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest

amendments and conveying to worksite, rolling and lowering into

trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest

amendments and conveying to worksite, rolling and lowering into

trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest

amendments and conveying to worksite, rolling and lowering into

trenches, laying true to line and level and perfect linking at joint...

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Refilling available earth around trenches/pipelines, cables in layers not

exceeding 20 cms in depth, compacting each deposited layer by ramming after

watering with a lead upto 50 m, and lift upto 1.5 ...

Constructing brick masonry chamber of internal dimension 450x450mm

and depth of 600mm (inner dimensions) with modular bricks of CD 75

in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 600x450mm

and depth of 600mm (inner dimensions) with modular bricks of CD 75

in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing white vitreous china flat back half stall urinal

of size 580x380x350 mm with white PVC automatic flushing cistern,

with fittings, standard size C.P. brass flush pipe, spreaders wi...

CONCRETE PAVEMENT IN COMPOUND WALL

Construction of sub-grade and earthen shoulders with approved

material obtained from borrow pits with all lifts & leads,

transporting to site, spreading, grading to required slope and

compacted to mee...

Construction of Granular Sub-Base of required grading as per

design spreading in uniform layers with motor grader on

prepared surface mixing by mix in place method with front end

loader at OMC and com...

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including premixing

the Material with water at OMC in mechanical mix plant carriage

of mixed Materia...

Providing and constructing un-reinforced plain cement

concrete pavement, thickness as per design, over a prepared

sub base, with 43 grade cement or any other type as per

Clause 1501.2.2 M30 (Grade), c...

Providing and erecting direction and place identification retroreflectorised

sign as per IRC:67:2022 made of high intensity

grade sheeting vide clause 801.3, fixed over aluminium

sheeting, 2 mm thick ...

Earth work in surface excavation by mechanical means for lowering & leveling

the ground for all works other than foundation in all kinds of soils & upto depth

not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for Foundation upto Plinth add 8%

Providing Random rubble masonry with hard stone in foundation and

plinth including levelling up with cement concrete 1:6:12 (1 cement : 6

coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Columns / Shaft (Slip Centering) add 70%

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for Plinth Beams of Buildings add 50%

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Beams, Lintels & Troughs of Aqueducts add 60%

Providing Brick work with common burnt clay modular bricks of class

designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement

: 4 coarse sand) including cost of all materials, labour, sc...

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing 15 mm cement plaster on rough side of single or half brick

wall finished with a floating coat of neat cement of mix 1:3 (1 cement:

3 fine sand) including rounding off corners wherever requir...

Providing Raised and cut pointing: Pointing on stone work with cement

mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely

lining, including cost of materials, labour, curing as per...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and

diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates

at the junctions and corners, 25 mm dia pulley, 40x40x6 mm...

Providing and fixing Steel work welded in built up sections/ framed

work, including cutting, hoisting, fixing in position and applying a priming

coat of approved steel primer using structural steel et...

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing and fixing in position copper plate as per design for expansion joints.

Providing and fixing in position 12mm thick bitumen impregnated fiber board

conforming to IS: 1838, including cost of primer, sealing compound Grade-A

in expansion joints.

Non-asbestos fibre cement board 6 mm thick as per IS: 14862. 200 mm wide

Providing and fixing sheet covering over expansion joints with iron screws

as per design. Aluminium fluted strips 3.15 mm thick. 200 mm wide

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars and ...

Geophysical investigation at site for sinking borewells for Providing

drinking water to the habitation either through the Hand Pump MWS

or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars and ...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig

of capacity 300 PSIG & above 1100 CMF & above in all strata including

over burdern upto 20 m. Fixing of casing pipes, collars and ...

PVC pipes of 6 Kg/cm2 for 160mm(3.923)

PVC pipes of 4 Kg/cm2 for 140mm(2.131)

Providing and laying at site of work MS casing caps as per IS 1239 (part-

II) 1982 with all latest amendments if any for any dia. The thickness

of plate used for covering one end shall be 3mm (minimum...

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch)

suitable for bore well confirming to IS 8034-2000 specifications, to work

site with testing of as per instructions of engineer incha...

Supply and delivery at site Stringing of heavy duty Naylone/PP rope with

ISI etc complete suitable for Single phase Pumpsets.

Providing, laying and jointing HDPE pipes of specified grade and

conforming to IS 4984-2016 with latest ammendments and conveying

to work site including loading and unloading at both destinations and

Labour charges for Erection, Electrification and commissioning of Pump

sets, including aligning and balancing of all items including supply and

erection of two pair of supporting clamps, bore well cap...

Supply and delivery at site Brand new best make PVC insulated cable of

Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990

with ISI Mark and as per its latest amendments. 1x3x4 S...

Supply and delivery at site of brand new best make non-return valve as

per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

Supply and delivery at site best indigenous brand new power capacitor as

per IS 2834/1986 with latest amendments with KPTCL authorities and

erection, electrification and commissioning of the same at t...

Supply, installing,testing and commissioning COMMON control panel

consisting of the following INCOMING:1 No set of Phase indicating

lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog

Labour charges for erection of outdoor type panel board and meter board

units with all necessary materials and labour, tools and equipments

including providing cement concrete foundation bed etc., com...

Supply and delivery at site delivery of best indigenous brand new MCB

(Miniature Circuit Breakers) of required capacity as per IS 88228/1978

and its latest amendments and with ISI Mark of 6/10/16/20/2...

Labour charges for providing connection using insulated sheathed

steel wire cable as per IS 1554/ 1988 with latest amendments from

KPTCL pole to meter board unit, with all necessary materials ,tools a...

Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990

with latest amendments complete with GI fittings (excluding the cost

of fittings) with cuts and threads wherever necessary, includin...

Supply and delivery at site Accessories for Single Phase pumpset like

SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation

Tape etc complete with ISI mark

GESCOM meter connection charges

Earthing: Providing and fixing and wiring earth electrode for grounding

circuits IC cutouts and other equipments on the meter board in the pit.

The pits should be filled up with equal proportion of sa...

Earth work excavation by manual means for drains, canals, waste weir, draft,

approach channels, key trenches, foundation of Buildings & bridges and such

simillar works in all kinds of soils, as per dr...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all CPVC

plain & brass threaded fittings This includes jointing of pipe...

Refilling available earth around trenches/pipelines, cables in layers not

exceeding 20 cms in depth, compacting each deposited layer by ramming after

watering with a lead upto 50 m, and lift upto 1.5 ...

Earth work in surface excavation by mechanical means for lowering & leveling

the ground for all works other than foundation in all kinds of soils & upto depth

not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for Culverts (Head walls) add 8%

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement:

3 coarse sand) finished with a floating coat of neat cement on the rough

side of single or half brick wall including rounding off corne...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slab add 50%

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying in position Cement Concrete for all Sub structures of

building, Irrigation works, Sub structure works of bridges, Drain works &

other parallel works from 0.50m to 3.50 m height. T...

Addendum I-Percentage Additionalities for Formwork,

Centering & Scaffolding for Earth retaining structures add 10%

Earth work in surface excavation by mechanical means for lowering & leveling

the ground for all works other than foundation in all kinds of soils & upto depth

not exceeding 300mm as per drawing and te...

Earth work excavation for Foundation by mechanical means for all works &

depth upto 3 m, as per drawing and technical specifications, including setting

out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for Foundation upto Plinth Isolated add 8%

Construction of Embankment by excavating the available approved Gravel/

Murrum deposited at a place or borrow pits during or prior excavation with all

lifts and lead, transportation to site, spreading...

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement:

3 coarse sand) finished with a floating coat of neat cement on the rough

side of single or half brick wall including rounding off corne...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for RCC Roof Slab add 50%

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Addendum I-Percentage Additionalities for Formwork, Centering & Scaffolding for Earth retaining structures add 10%

Supplying of . TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R410...

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C

Extra for Fabrication supply and fixing of Stand fabricated using lotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries.

Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil nd gas ...

Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operati...

Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charg...

Providing and fixing Two seater Sofa with cushion of size 5(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in charge

Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per direction of engineer in char...

Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic Glossy or Matt finished laminate (1.5mm thick) and other side balancing lamination(preferably ...

Providing and supplying cupboard shutter with 18mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) HDHMR BO ARD of approved b...

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic Glossy or Matt finished laminate (1.5mm thick) and other side balancing lamination(preferably ...

Providing and supplying cupboard shutter with 18mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) HDHMR BO ARD of approved b...

Providing and fixing Stainless Steel 304 grade soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including maki...

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen ...

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 300mm

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle gr...

Supplying and drawing UTP-CAT 6E LAN cable

Supplying & Fixing of switch mounting rack with power manager & Cable manager

Supplying & Fixing of Power strip

Supplying fixing of Network Switches

Supplying & Fixing of . ms Cat 6 Patch Cable

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm

GODREJ GLASS ALMIRA (BOOK CASE)

EXECUTIVE BIG TABLE (3'X6')

EXECUTIVE CHAIR LEATHER

NILKAMAL PLASTIC CHAIRS

CURTAINS (MAHARAJA STYLE)

Bombay Dieng Bed Sheet (2.2X2.5Mtr)

Bombay Dieng Pillow

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the wall...

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length 20 mm nominal bore

Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less ...

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Balaji Furniture Modular Extendable Conference Table Prelam MDF Board Table Top Wooden Engineer Wood Understructure

activeforall.co.in Folding WheelChair (Adult Size)

Canon A4 and Legal Colour Laser Computer Printer

Dell Intel Core i5-14500 All in One PC

VOLTRIQ Type Category Class of TV set Smart TV(2) Actual Screen Size (inches) 65 LED (Light Emitting Diode)

CANNES LlONS-M S BATHMOTOR SERVICES AND SUPPLIES Seat only Chair Count 4

BLACKSMITHATTICUS Single Wooden Bed with Headboard only

Sleepwell Two Layers Foam Mattress - Size 1905 mm x 914 mm

P BOARD Softboard core material type of 1200 x 1800 mm Pin Up Notice Board Without front cover

SATKAR STEEL INDUSTRY-SATKAR STEEL INDUSTRY Stainless Steel Rectangular Dining Table with C3431E Rectangular fixed Chair

UGO Bedroom Wardrobes, Number of doors 3

Unbranded Rectangular Matt Tress Name Plate 18 inch 6 inch

CP PLUS 2MP (1920 x 1080 Pixel) or better Dome Camera

CP PLUS 32 Channels NVR with 4K

MiPhi-DUGONG INTERNATIONAL PRIVATE LIMITED Internal Solid State Drive (SSD) with Warranty 5 Years

VOLTRIQ Flat LED Backlit LCD (Liquid Crystal Display) Computer Monitor

IFB Total Volume for Direct Cool 176- 194 Total Volume for Frost-free NA 4 star

Electrical Work

Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal PVC junction boxes adhesive paste etc., and running before concreting the slab. The ...

Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal PVC junction boxes adhesive paste etc., and running before concreting the slab. The ...

supplying heavy gauge PVC Conduit Pipe ….dia.mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement p...

supplying heavy gauge PVC Conduit Pipe ….dia.mm thick with suitable size bends, metal junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement p...

Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable conduit entry as required with one coat of primer of approved make etc.200x90x65mm

Supplying and fixing PVC metal conduit accessories Deep junction box.19/20mm deep junction box

Supplying and fixing PVC metal conduit accessories Deep junction box. 19/20mm deep junction box

Extra for Groove cutting in brick wall CC floor to the suitable depth for concealing of Conduit GI pipe and plastering, up to wall surface complete up to 50mm conduit in brick wall

Extra for Groove cutting in brick wall CC floor to the suitable depth for concealing of Conduit GI pipe and plastering, up to wall surface complete up to 50mm conduit CC floor

Supplying PVC GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying PVC GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...

Supplying And Fixing Metal Fan Box with Round Hook.

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (c...

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (c...

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (c...

Wiring for lighting power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirmin...

Wiring for lighting power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirmin...

Wiring for lighting power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirmin...

Wiring for lighting power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirmin...

Wiring for lighting power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirmin...

Supplying and mounting 2 Nos. of 2 way 6 amps flush type switches either surface flush mounted on existing gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring a...

Supplying and fixing replacing of 6/16 32Amps electrical accessories on existing switch board. 6 Amps lamp holder

Supplying and flush mounting powder coated galavanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 1-...

Supplying and flush mounting powder coated galavanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 4-...

Supplying and flush mounting powder coated galavanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 6W...

Supplying and flush mounting powder coated galavanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 8W...

Supplying and flush mounting powder coated galavanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 10...

Supplying and flush mounting powder coated galavanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick Stone C.C wall 16...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch existing modular switch plate as per IS 3854 and IS 1293 6Amps one way.

Supplying and fixing of modular switch existing modular switch plate as per IS 3854 and IS 1293 6Amps Two way

Supplying and fixing of modular switch existing modular switch plate as per IS 3854 and IS 12936Amps 3way socket.

Supplying and fixing of modular switch existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator.

Supplying and fixing of modular switch existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch

Supplying and fixing of modular switch existing modular switch plate as per IS 3854 and IS 1293 6/16Amps universal socket

Supplying and fixing hylum brand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws.

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws. 80mm to 90 mm

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size ……mm conduit using necessary machine screws. 110mm

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.48" Sweep (1200 mm) Regular model

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with

double ball be...

Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI greater than 70%. efficacy greater than80 lumen per W, life greater t...

Supplying and fixing of slim box fitting, made out of CRCA

Sheet metal body with locking type holder completely wired. Excluding Ballast & Fluorescent Tube.

Supplying & fixing of Porcelain fuse channel with cut out on

existing wooden panel using necessary nuts, bolts and washers.63 A

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 10" x 8...

Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 23 0.0076" twin twisted PVC insulated wires, required Nos ...

Fixing a ceiling wall mounting fan of all capacities and all

types, with necessary clA and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23 ...

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23 0.0076 inch PVC insulated twin core wire.

Supply of LED Streetlight luminaire with pressure die cast

aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supplying and Fixing.mm dia class A GI pipe bracket upto

2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV SV MH FTL street light ...

Supply of round square recess surface mounted rolling type LED Down light with . W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swive...

Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications.

Fixing halogen metal halide SVL IL LED floodlight fitting over

existing pole wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON OFF, energy cross-3 with Short circuit breaking c...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON OFF, energy cross-3 with Short circuit breaking c...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON OFF, energy cross-3 with Short circuit breaking c...

Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase 3 ph...

Supplying and fixing regular MCB distribution boards on wall wood board flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase 3 ph...

GI Grounding pipe,B-Class,42 mm dia,2.5 Mts long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm...

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

Digging of Pit for providing GI Pipe type Earthing LABOUR RATE Ordinary Soil

GI Copper strips for grounding connections, using necessary fixing materials as required.25 x 3 mm GI strip

Fabricating supplying and mounting MS box made out SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with...

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing

wood or metal box using N. F. screws. 14 SWG

Supplying and fixing angle iron frame work fabricated out of M.S.

angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 x 5...

Supplying A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic FRP DMC insulator which are mo...

Wiring for lighting power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirmin...

Wiring for lighting power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirmin...

Wiring for lighting power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirmin...

Wiring for lighting power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirmin...

Wiring for lighting power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694:1990 & confirmin...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

Supplying, fixing and wiring rotary selector switch suitable for

Supplying, fixing and wiring rotary selector switch suitable for

Supplying, fixing and wiring 3 Phase Digital Ammeter

Supplying and fixing of Shunt trip suitable for MCCB.CBCT

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.

Supplying, fixing and wiring 50 5 to 400 5A 5VA burden Current

Transformer Class 0.5 accuracy with Tape Wound.

Supplying and fixing of LED type panel board indicating lamp

with required colour suitable for 230 440VAC. 50 Hz 12 24V D.C.

GI Grounding pipe,B-Class,42 mm dia,2.5 Mts long,3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag