Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.2 LAccepted-AOC H NO 154 VILLAGE SHIKARPUR PO NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹48.1 L+₹1.4 L (3.07%)Rejected-Finance 1 218 1C SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | L2 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 3 | L3₹52.9 L+₹6.2 L (13.3%)Rejected-Finance N A | NA | NA | 121004 | L3 | Rejected-Finance BEING OTHER THAN LOWEST |
Tender Value
₹48.7 L
EMD Value
₹97,460
Closing Date
13 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
PROVN OF 05 NOS REVENUE WORK AT BLDG NO P-108 DG ARMD CORPS, UNIT KOTE (BLDG NO T-22) OF 110 MED REGT P-27 MALL ROAD, CAMP AREA OF CPG AND STORAGE ACCN BUILDING NO T-10, T-12, T-14 OF 512 LIGHT AIR DEFENCE MISSILE REGT UNDER GE (EAST) DELHI CANTT-10
2023_MES_580650_1
GE/DE-95/2022-23
Open Tender
Civil Works
Item Rate
120 days
GE (EAST) DELHI CANTT-10
Class D cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹97,460
Yes
20 Mar 2023
13 Feb 2023
15 Mar 2023
13 Feb 2023
13 Mar 2023
27 Feb 2023
Amount
Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface of ceiling etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.
M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified.
M & L Preparation of newly plastered external surfaces of walls and applying 2mm thick Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applyingg Two coats of weather proofing exterior acrylic emulsion paint premium quality over a coat of primer complete all as specified and as directed.
M & L Preparation of new plaster internal wall and ceiling surfaces and applying 2mm thick wall care putty, sand papering to making surface smooth and applying Two coats of Oil Bound distemper over a coat of primer complete all as specified and directed.
M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing to store complete all as specified and as directed.
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 8mm thick tinted/frousted glass. (Note: The unit rate quoted by contractor include cost of glass and all other connected accessories. Net opening including frame will be measured for payment purpose.) Make:-Okotech Aparno, H20 Solution, Fenesta or equavalent.
S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern), supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
S&F Stainless steel butt hinges medium weight 100 mm long complete all as specified.
S&F Aluminium handles, cast type, anodised of size 150mm complete all as specified.
S&F Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified .
Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling structural steel work any type including doors, gates but excluding framed truss etc., complete all as specified & directed.
S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240complete all as specified and directed
M & L two coat of synthetic enamel paint over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.
Demolition or cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below or above ground level) complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6, complete all as specified and as directed.
M & L for glazed coloured ceramic tiles in vertical surface 300x600x7 mm thick (with pattern and border work as required at site) set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick rendering in CM 1:4 complete all as specified and as directed.
M & L for coloured vetrified tiles of size 600 x 600 x 8-10mm thick as in floor over 15mm thick screed bed 1:6 in cement mortar, set and jointed in white cement with pigment to match complete all as specified and as directed.
M & L for Coloured Chequered cement concrete tiles 30cm x30 cm x 20-22mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments, over and including 20mm thick screed bed in cement mortar 1:6 Including dismantling of existing chequerred tiles of any type complete all as specified and directed.
M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position complete all as specified and as directed.
M & L 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring complete all as specified and directed
M & L 75 mm thick Cement concrete work as in plinth protection type C-1 ,1:3:6 (20mm graded aggregates) and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed
M & L for plain cement concrete 1:2:4 ( type B-2 using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges etc including necessary form work complete all as specified and directed.
S & F designer board false ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.
S & F in repairs ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. (d) Mirror cabinet size 780mm x 160mm x 800mm. Make : Hindware - Cat Part No. 70089 or 70084. Make : Kohler : Cat Part No. K-31602IN-E63
S & F in repairs Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap with connection to drain and to flushing pipe antisyphonage pipe, including sheet cover and making good to floor complete all as specified and directed.
S & F in repairs 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket ,32mm bore PVC flush pipe complete all as specified and directed
S & F Full pedestal pattern wash hand basin, size of basin 630mm x 510mm and pedestal of 900mm long ivory colour as approved by GE including fixing waste pipe and chromium plated brass waste fitting in repairs, complete all as specified and as directed.
S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, Health Faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).
S&F in repairs Vitreous China Full stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, complete all as specified and directed (Make : Jaquar or equivalent in Cera/Parryware).
S & F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases ,and making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing including taking up or down old steel tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed.
S & F steel water tubing galvanised 20mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases ,and making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.
S & F rotational moulded polythene, water storage tank 1000Ltrs capacity, closed top, cylindrical, hoisted and fixed in position including minor repairing & 20 mm float ball brass valves high pressure with polythene float and flynut complete, Aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 20mm - 210 gms) including dismantling old tank complete all as specified and dirtected .
S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.
S & F Designer type high quality fancy type looking mirror 6-8mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.
S&F in repairs 15mm bib taps, (Long body) cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe15mm bore all as specified and directed. Make & Cat Part : Jaquar-Cat No. CON-047KN, Jaquar-Cat No. CON-107KN, Kohler-Cat No.K-37341IN-4-CP .
S & F in repairs 15mm Angle valve of CP any colour high pressure screwed for iron pipe and fixed, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm.
S&F in repairs 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid on walls complete all as specifed and directed.
S & F 75 mm diaPVC cowls
S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.
S & F in repairs 100 mm dia PVC floor trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)
S & F in repairs 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor completed all as specified and directed
S & F 110 mm PVC (SWR) bends with acess door completed all as specified and directed
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed by Engr-in- Charge.
Returning & filling including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of excavated material n.exc 50 mtr and depositing where directed at level not exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M & L for RCC M-25 design mix as in slabs supported on walls, beams and columns in floors , roofs, landings , balconies, canopies, deck slabs and shelves etc complete all as specified and directed by Engr-in-Charge.
M & L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips etc complete all as specified and directed by Engr-in-Charge.
M&L for mild steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required including cranking bending spirally & binding with and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engr-in-Charge.
M & L for form work to sides and soffits of suspended slabs such as roof slabs , landings and similar work not exc 200 mm thick (horizontal or sloopping) for flat rough finished surfaces complete all as specified and directed by Engr -in Charge.
M & L for form work to edges of concrete flats, treads breaks in floors , window cills , concrete railling, opening in concrete walls, floors and roofs RCC/PCC bands floors roofs n exc 20 cm wide and sides of RCC/PCC bands in walls , horizontal or slooping and similar work exc 10 cm and not exc 20 cm wide surface finished rough complete all as specified and directed.
M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.
M & L Rendering 5 mm thick on fair faces of concrete or concrete surface in ceiling in CM 1:3, finished even and smooth without using extra cement complete all as specified and directed by Engr -in Charge.
M&L75 mm thick cement concrete type C-2 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and directed.
M&L 18-20 mm thick machine cut kota stone slab flooring jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and incl 20 mm thick screed bed of CM 1:6 over neat cement slurry @ 3 Kg/Sqm over sub base including rubbing and polishing complete all as specified and directed by Engr -in Charge.
M&L 18-20 mm thick machine cut kota stone in riser of steps, skirting, dado and pillar laid over and incl 10 mm thick rendering in CM 1:4 including rubbing and polishing complete all as specified and directed.
Dismantling old posts or struts ( wood, steel or RCC) any section, including taking out embedded portion and making good and excavation & prepration of post holes removal of surplus excavated material completed all as specified and directed
BLANK
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft & loose soil.
M & L for mild steel angle , flat iron as in post & strut including cutting tops to shape as directed drilling holes, notching for wire and similar work conforming to Fe 290 Gde 165 including erection in ground complete all as specified and directed.
M&L for Plain cement concrete 1:3:6 type C - 2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
S & F Chain link MS galvanisd fencing any size or type ( approved by GE) including line wires, any mesh, size and type to any of standards , rails , staining bolts, etc including provision of bindings wire complete all as specified and directed.
S & F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed
S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed
S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws with bent to a curve (of any radius as per required) complete all as specified and directed
S&F rolled mild steel work as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250), Quality B, complete all as specified and directed
Material and labour for preparation of new surface of brick/concrete plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coat of cement base paint etc complete all as specified and directed by Engr -in Charge.
M&L for 3 coats of white wash on ceiling including preparation of newly plastered surfaces, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed.
S & F in repair precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvres and jallies, 50mm thick set in CM (1:4) (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured and paid seperately) complete all as specified and directed.
S & F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and with stainless steel wiremesh (0.36mm nominal dia of wire and average width of apreture 1.40mm. (Note: The unit rate quoted by contractor include cost of wiremesh and all other connected accessories. Net opening including frame will be measured for payment purpose.) Make:-Okotech Aparno, H20 Solution, Fenesta or equavalent
S & F in repairs Brass chromium plated wall mixture 3 in 1 system with provision for hand shower and overhead shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls, fixed in repairs, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP.
S & F for Angle Iron sections as in roof trusses (framed), trussed purlins, rafters, standing poles, crane gantries, rails and fastenings and heavy brackets framing including distance pieces, cleats etc., conforming to Fe-410W Gde E- 250 quality A, complete all as specified and as directed.
S & F Rotational moulded polyethylene water storage tanks 1000 ltr capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete.
S & F Rotational moulded polyethylene water storage tanks 2000 ltr capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete.
M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-40 Grade laid over and incl 50mm thick sand cushioning, laid duly mainting propper slope as per requirement at site complete all as specified and as directed.
Surface excavation n etc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil including removal of soil, complete all as specified and directed.
M&L 100 mm thick cement concrete type C-2 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.
M&L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and culvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required (Size and pattern as approved by GE).
M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4, complete all as specified and directed.
S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor completed all as specified and directed
Taking down carefully old unserviceable copper/aluminium point wiring conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, bell ,regulator and socket light fittings etc and making good the disturbed surface complete all as directed.
Point wiring complete with 1.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed/surface ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers etc including FRLS, PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal Flush box of suitable size for fixing modular switches/sockets/fan regulator etc, with and including modular cover plates of suitable size and making good surface as original complete all as directed for the following :-
(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.
(b) one socket outlet point 5 amps on the same board.
(c) For one socket outlet point 5 amps on independent board.
(d) For one socket outlet point 15 amps on independent board with 2.5Sqmm main wire & 2.5 Sqmm earth wire per point.
BLANK
BLANK
S & F of Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed.
Supply and fixing in replacement of LED mirror light fitting 10 watt, cool/warm white and making all electric connections complete all as directed.
Supply and fixing in replacement of LED tube light fitting, 20 watt. with and including all electric connections complete all as specified and as directed.
S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
S&F of wall mounted fan 400mm sweep, Copper winding, 240 Volts. 50 Hz and depositing the old u/s to MES store yard, complete all as specified and as directed.
Supply and fixing in replacement of LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed.
Supply and fixing in replacement of security light fitting bracket, 1 mtr long made out of galvanized iron pipe of 32 mm dia size light grade bent to shape complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.
S&F in replacement of ventilatiing fan 200mm sweep 230 volt AC with & including louvers and all fixing arrangements complete all as specified & directed.
S&F of LED Flood light 50Watt white focus , super strong metal body & handle, high lumens energy efficient IP 67 led light complete all as specified and directed by Engr-in-Charge.
Material and labour for Sub main wiring with 2 run of 2.5 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in to and incl PVC conduit with all fittings and including 2.5 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, complete all as specified.
Supply and fixing of Distribution Board Single Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 02 way, 240 volts, and making all necessary connections complete all as directed.
Supply and fixing of isolator 40- 63 Amp, SPN type with over load and short circuit protection complete all as directed.
S&F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.
S&F Modular socket 6 Amp, 2/3 pin, universal type, 2 module size complete all as directed.
S&F Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed.
S&F Modular socket 16 Amp multipurpose, 2 module size with indicator lamp complete all as directed.
S&F in replacement ventilation (exhaust) fan 250mm sweep made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding complete all as specified and as directed.
S&F electric water heater of capacity 25 litre, storage type steel body with copper inner tank and heating element upto 2 KW BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. and taking down old unserviceable and depositing to MES store yard complete all as specified and as directed.
S&Fin replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 04 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.
S&F in replacement of MCB SP, 10 KA, 10 to 32 Amp, with over load and short circuit protection complete all as directed.
S&F in replacement of MCB SPN10 KA, 40 to 63 Amp, with over load and short circuit protection complete all as directed
Supply and fixing on line booster pressure pump 0.18 HP single phase 230V, min 1800 LPH head min 9m low noise maintenance free IP 44 protection including electric connection complete all as specified and directed
THE LOTUS BUILDTECH
Vipul Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .