REPAIR MAINT OF EXTERNAL ELECTRIC SUPPLY, LT CABLE, LT PANEL, GLOW SIGN BOARD AND CONNECTED ITEMS IN WAR MEMORIAL COLONY AND MES COLONY UNDER GE I R AND D KANPUR

Amount

Excavation in trenches in any type of soil n exc 1.5 mtr in width and n. exc 1.5 mtr in depth and getting out all as required for laying of cables,foundation filling of poles or stays and for rerouting of cables.

Returning filling, in including spreading ,leveling, watering and well ramming in layers not exc 25 cm each all as required.

Removing excavated material to a distance not exceeding 50 meters and depositing where directed at a level not exc 1.5 mtr above the starting point.

M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable

M&L for Sub class ‘B’ bricks old size. laid dry flat over the cable abutting each other, length of cable equal to width of brick all as required.

M&L for cement concrete(1;3;6) type1 ,M-10 using 20mm mm graded coarse aggregate for repairing surfaces complete including surface dressing and leveling by surface excavation wherever required complete in all respect or as directed.

M&L for cutting of PCC/Hard standing/WBM road for passing cable including making good with PCC work all as specified and directed .

Supply and laying in replacement to wall or poles or fixing or passing through pipe, in replacement of 1100 volts grade heavy duty cable with XLPE insulated aluminium multistranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed 16 sq. mm nominal cross section 2 core in service connections all as required and directed.

All as per srl item No 8.00 above but cable of size 16 Sqmm 4 core.

All as per srl item No 8.00 above but cable of size 10 Sqmm 2 core.

All as per srl item No 8.00 above but cable of size 10 Sqmm 4 core.

Supply and laying in replacement of trenches or fixing to wall/pole or passing through pipe in replacement of XLPE insulated heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 25 Sqmm 3.5 core. (Note : Incl making good all distributed wall surfaces/ flooring/tilling to match with existing specification)

All as per srl item No 12.00 above but cable of size 35 Sqmm 3.5 core.

All as per srl item No 12.00 above but cable of size 50 Sqmm 3.5 core.

All as per srl item No 12.00 above but cable of size 70 Sqmm 3.5 core.

All as per srl item No 12.00 above but cable of size 95 Sqmm 3.5 core.

All as per srl item No 12.00 above but cable of size 120 Sqmm 3.5 core.

S&F in replacement of cable jointing kit for 1100 volt grade cable for straight through termination heat shrinkable type complete with jointing material and accessories suitable for XLPE/PVC armoured aluminium conductor cable of size 10 to 16 Sqmm 3.5/4 core.

All as per item No 18.00 above but for 25 to 50 Sqmm size.

All as per item No 18.00 above but for 70 to 150 Sqmm size.

Unbinding from insulators ACSR conductor any size of LT/HT over head line for repairs. Re-stretching of ACSR conductor to achieve proper sag and rebinding to the insulators using alumn/GI binding wire and making all existing cable connections all as required at site.

Supply, errecting and installation of steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) duly painted with two coat of black bituminous paint through out, internally and externally up to planning depth and painting remaining portion of pole with two coat of aluminium paint to the entire exposed surfaces over one coat of red oxide primer making/painting three Nos circular strips each of 30 cm wide with one yellow and 02 Nos black colour strip synthetic enamel paint and marking pole number with black paint including excavation, earth work, PCC work complete all as spfd and directed.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from steel section including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape ors size as indicated or directed and inclusive of oneprimer coat, one under coat and one finishing coat of alumn paint.

M&L in replacement for stay assy complete with MS stay plate of size 300x300x6mm thick, stay rod 16mm dia, stay bow, loop type insulator, nuts, bolts and check nuts of GI all as shown in EP No 01 of SSR Part-I of 1991 including excavation, earth work,PCC work complete all as specifeid & directed by Engr-in-charge.

S&F Pin type, porcelain, vitreous, brown insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade.

M&L in replacement of for GI tubing light grade 80mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole complete all as specified and as directed.(clamps for fixing pipe, nuts, bolts washers shall be measured separately)

All as per srl item No 26.00 above but 50mm bore

All as per srl item No 26.00 above but 40mm bore

S&F in replacement of bus bar chambers 300 mm long iron clad with 4 Nos 400 Amp rated Aluminium strips complete fixed flush wall and making good the disturbed wall surfaces all as a required at site or directed.

All as per srl item No 29.00 above but with 4 Nos 200 Amp.

All as per srl item No 29.00 above but with 4 Nos 100 Amp.

Repair, maint and of broken doors for LT panel and bus bars by welding and incl fixing of new hinges and other material as required at site complete all as spfd and directed.

S&F in replacement of LED post top lantern 35/40 Watt warm white/white made in die cast aluminium housing with decorative clear opal acrylic diffuser and IP-65 protection including fixing of GI pipe of suitable dia dia, 300 mm long light grade, partly embedded on column of gate with fixing arrangement complete and making electrical connection complete all as spfd.

M&L for cutting, trimming of branches along the OH conductor of LT/ HT line within 2 mtr distance along both side of line and strictly all branches in one place as directed by Engineer-in-Charge.

S&F in replacement of MCCB 4 Pole 415 Volts 3 phase 400 Amps 36 KA, thermal magnetic release connection complete all as specified

All as per item No 35.00 above but MCCB 630 Amps 50 KA.

All as per item No 35.00 above but MCCB 250 Amps 35/36 KA.

All as per item No 35.00 above but MCCB 160 Amps 25 KA.

All as per item No 35.00 above but MCCB 100 Amps 16 KA.

All as per item No 35.00 above but MCCB 63 Amps 16 KA.

All as per item No 35.00 above but MCCB 3 pole 100 Amps 25 KA.

All as per item No 35.00 above but MCCB 3 pole 160 Amps 25 KA.

Detection of any type of fault in HT/LT underground Line (laid in soil at plane area or forest area) with the help of Cable fault locator machine. Cable fault locator with carring vehicle will be brought by the cable fault detection agencies. Span of faulty cable will be trace out by the agencies by meggering HT cable. Note : 1. Detection of fault in one span of length will be measured as one Job either machine placed from one side or both side of the cable. 2. Technicians will be employed by the working agencies. 3. Earth work and taking out will be measured and paid seperately. 4. Material for repair and replacement measured and paid saperately. 5. One job shall be measured if the fault has successfully identified by the fault locator machine or removing moisture in the cable if required.

M&L in replacement of earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.3 mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed incl testing on competion.

All as per srl item No 44.00 but connected to galvanised iron strip 32x6mm earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electric plate No 3 connected to earth test point all as specified.

M&L for fixing earthing strip 32 x 6 mm aluminium strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required, In Repair,complete all as specified & directed.

S&F cable lugs up to 50 Sqmm made up of Aluminium

S&F cable lugs 50 to 120 Sqmm made up of Aluminium for HT/LT

S&F cable lugs 120 to 240 Sqmm made up of Aluminium for HT/LT

Material and labour for repair of LED glow sign board any size including replacement of acarlic/PVC sheet , letters any type and pasting with glue, including driver and wiring if required at site complete testing and fixed at existing location all as required and directed at site.

M&L for Design, Supply & installation in replacement of old rusted unserviceble display board with LED display board having compact design and maintinance friendly. The base of board made of ACP (Aluminium composit panel) 3mm thick and back side of board covered with GI sheet 24SWG, the letters and borders made of acrylic sheet 3mm thick of colour as approved by GE(I). LED strip should be as per the requirment of letter space, the display language may be English/Hindi (Alpha numeric), its visibility should be suitable for day and night (Outdoor application) and should be visible upto 25 Mtrs., the text effect should be static, the LED mean time between failure arrangement should not be less than 40000 hrs, suitable for power supply 230 volts/ 50 Hz AC. The board shall be suitably braced on backside with iron clamps and channel or other applicable class mounting brackets and making good of disturbed surfaces as original including wiring with copper cable and connecting to existing supply complete all as specified and directed by GE(I). Note :- Fabrication should be done on Rectangular board having max 60 letters of characters in English/ Hindi language letter , character height not exceeding 255 mm and back depth Max 45 mm of suitable width & one logo of dia not exceeding 450 mm and back depth 80 mm as per sample.

Cleaning or surface excavation or dressing not exceeding 30 cm deep around the area of outdoor of Nano & Polymer bldg, AC plant area, DG set area etc by cutting and removal/uprouting of unwanted grass/bushes, small trees including surface dressing and leveling by surface excavation wherever required complete in all respect or as directed.

M&L for painting of outdoor/indoor LT Panel with spray painting machine with emsynthetic enamelle paint of existing colour two coat and black paint in Angle iron / MS flat or stand after scratcing with sand paper or any other suitable mean up to satisfactory level of engr in Charge and Re-clean the the existing name plate visible by any means complete all as directed.

Supply and fix sheet metal enclosure TPN MCB distribution board, double door with IP-43 IK-09 protection with metal door 3- phase 415 volts 4 way TPN including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

Supply and fix sheet metal enclosure SPN MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

M&L for MCB single pole 240 volts 5 to 25 amps, with rupturing capacity 10 KA using thimbles of required size.

M&L MCB SPN single pole & neutral 240 volts 30 to 63 amps,with rupturing capacity 10 KA using thimbles of required size.

M&L MCB Three pole & neutral 240 volts 63 amps,with rupturing capacity 10 KA using thimbles of required size.

M&L MCB Three pole 240 volts 63 amps,with rupturing capacity 10 KA using thimbles of required size.

Supply and fix in replacement of High power LED security light 35 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driver incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as spfd.

Taking down old unserviceable security light fittings roadway lumanarie type from any height and S&F of High power LED street light 70/72 Watt IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power LEDs as light source and electronic driver fixed on pole/wall incl electric connections complete all as spfd.

All as per item No 61.00 here-in-before but LED street light 100 Watt.

Supplying and fixing in replacment of 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of size 4 sqmm twin core, served with inner sheathing of PVC tape and overall PVC sheathed in service connections connection complete all as specified.

All same as per serial item No 63.00 but for twin core cable of size 6 sqmm.

Supply & Fixed cable of size 6 sqmm single core PVC insulated flexible copper conductor multistranded cable complete all as specified and as directed by the Engr-in-Charge

All same as per serial item No 65.00 but for twin core cable of size 4 sqmm.

All same as per serial item No 66.00 but for twin core cable of size 2.5 sqmm.

Supply & fixed in replacement surface & wall mounted LED batten with PVC housing and robust construction fitting 1x36 Watts including Electronic circuit and 1 x36 Watt LED lamp, pre-wired including necessary electric connection from ceiling rose to light fitting complete

Supply & fixing, install testing and commissioning of feeder pillar box ,indoor type plane shape,three phase, 4 wire, copper bus bar for phases and neutral made out of CRCA sheet 2.00 mm thick fabricated, powder coated ,dust and vermin proof , provn for ventilation, pillar box grouted on wall and of suitable size to accomodate the items mentioned below and having seperate compartment /chambers for cable gallery busbar etc all as specified and comprising of following including necessary cable connections to the MCCBs ,MCBs, LED Indicating lamp and cable lugs etc and feeder pillar design approval in Engr-in-charge. (a) Copper Bus bar with PVC sleeve rating 200 amps for Phase & 200 Amp for neutral - 01Set. (b) Phase indicating lamps LED type ( RYB) 01 Set (c) Incoming MCCB 160 Amp 4 pole 25 KA with adjustable thermal and fixed magnetic release -01 No and MCB TPN 80 Amp with rupturing capacity 10 KA -01 Nos (d) Outgoing MCB TPN 63 Amp with rupturing capacity 10 KA - 04 Nos

M&L for preparing scraping the old painted surfaces and applying one coat of aluminium paint on steel tubular swaged poles and swan neck /bracked, chanels/angles including making/pasting three nos cricular strips of 300 mm wide yellow & black colour with synthetic reflected enamel paint and marking /stencil writing of pole numbers with black paint complete and all as specified and directed.

G S SANDHU & CO. (BID ID -3475098)

Himanshu Construction and Suppliers (BID ID -3479993)