Upgradation of road along weighbridge and Office Block to M 40 Paver Block road and repairing patch near godown no. 3 at CW Kotputli

Name of the Bidder

Bidder Address, (registered)

Bidder Organization ID /CIN in case of Company

Bidder Telephone number

Bidder E-mail address

Type of Bidder constituent (Organization)

Attested copy of documents in support of Bidder Organization Type

Current List of Directors/Partners: as applicable

Name of the person holding the power of attorney for this Bid

Designation

Contact details of person holding the power of attorney

Attested Copy of Power of Attorney to sign & submit the Tender (as per format given in EXHIBIT-III of Appendix-II)

Earnest Money Deposit (EMD) of Amount as mentioned in APPENDIX-1 (TIS) to be paid through NEFT/RTGS in the bank account of CWC, and EMD submission proof is to be submitted. The bank details for submitting the EMD are: - Name of Account Holder - CENTRAL WAREHOUSING CORPORATION, Bank Name – HDFC BANK, Branch Name – HAUZ KHAS NEW DELHI, Account No.- 50100393023873, IFSC – HDFC0000467, MICR - 110240071

PF Registration code number of Bidder

COPY of PF Registration number of Bidder

GST Registration code number of Bidder

COPY of GST Registration number of Bidder

PAN of the Bidder

COPY of PAN of Bidder

Whether Enlisted /Empaneled with CPWD/ MES/ Railway/ PWD/ CWC/any other PSU etc. if any,

Copy of Enlistment/Empanelment certificate Submitted or Not

Whether Bidder is executing or completed any work awarded by CENTRAL WAREHOUSING CORPORATION in Past Three FY Year (FY 2023-24, FY 2024-25 & FY 2025-26) and Current FY 2026-27.

Affidavit along with this PQ Performa (EXHIBIT-I) on NJS paper signed and submitted after filling necessary details.

Declaration of near relatives (EXHIBIT-IV) submitted.

Particular Technical Experience w.r.t. Similar Nature of Work:

Brief of Similar Nature Work Experience-1

Work order/ contract agreement ref number and date

Name of client issued the work order and completion certificate

Completion certificate -ref number and date

Total value of work completed (Rs.)

Stipulated date of completion

Actual date of completion

If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

Brief of Similar Nature Work Experience-2

Work order/ contract agreement ref number and date

Name of client issued the work order and completion certificate

Completion certificate -ref number and date

Total value of work completed (Rs.)

Stipulated date of completion

Actual date of completion

If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

Brief of Similar Nature Work Experience-3

Work order/ contract agreement ref number and date

Name of client issued the work order and completion certificate

Completion certificate -ref number and date

Total value of work completed (Rs.)

Stipulated date of completion

Actual date of completion

If LD is levied: Amount / period of delay for which Liquidity damage is levied by client (if any)

Copy of completion/experience certificate of work and Copy of Agreement/Workorder issued by Client is submitted as per format given in EXHIBIT-V or EXHIBIT-VI or EXHIBIT-VII as applicable

Annual Financial Turnover-Total Revenue (Income) (as per CA certificate and audited P&L Account)

FY 2022-23 (only when audited turnover for FY 2025-26 is not available)

The average of financial turnover for the last three financial years i.e. FY 2025-26, 2024-25 and FY 2023-24 Or FY 2022-23 (FY 2022-23 to be referred only when Audited turnover of FY 2025-26 is not available)

Annual Financial Turnover-Total Revenue (Income) from Construction Works (as per CA certificate and audited P&L Account)

FY 2020–21 (only when audited turnover for FY 2025-26 is not available)

Bidder's Profit after Tax (PAT) (as per CA certificate and audited P&L Account)

FY 2020–21 (only when audited turnover for FY 2025-26 is not available)

Bidder's Total Net worth (as per CA certificate and audited

FY 2024-25 (only when audited turnover for FY 2025-26 is not available)

Copy of Audited Balance Sheets and Profit & Loss Statements for Annual financial turnover/ revenue (income), PAT & NETWORTH of Bidder (in support of Information provided above) to be submitted with Bid

FY 2020–21 (only when audited turnover for FY 2025-26 is not available)

Copy of Chartered Accountant’s Certificate as per format given in EXHIBIT VIII in support of information provided above on Annual financial turnover/ revenue (income), PAT of Bidder.

Chartered Accountant’s Certificate as per format given in EXHIBIT IX in support of information provided above on Net worth of Bidder.

Total Solvency in Rs. As per Banker certificate issued for this purpose

Banker's certificate in support of the above information as per EXHIBIT X submitted.

Description of item

Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost).

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All Kinds of Soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering and shuttering - All work up to plinth level a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :

Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Extra for every additional lif of 1.5 m or part thereof in excavation / banking excavated or stacked materials.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges,

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineerin-

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Description of item

Manufacturing/ Providing and laying precast inter locking cement concrete paver blocks of grade M-40 and size 200mm X 100mm X 100 mm including providing and laying 50 to 80mm (avg 65 mm) thick layer of bedding sand, joint filling with fine sand, compacting with plate compactor and final compaction with vibratory roller etc. as per specification. The item includes all cost of paver blocks i.e., cost of ingredients of paver blocks such as sand, aggregate, cement of high strength OPC cement as per IS 8112-2013, cost of bedding as well as sand filled in joints. The rate shall also include all lead, lifts, materials, machine tools, plants, labour, equipment & testing etc. complete in all respects as directed by Enineer - in - Charge

Providing and Fixing at or near ground level precast cement concrete saucer drain of grade M-30

Supplying and laying PVC Pipe : 200mm dia

E NIT_CWC/RO-JAI/ENGG/2026-27/02

Upgradation of road along weighbridge & Office Block to M-40 Paver Block road and repairing patch near godown no. 3 at CW Kotputli

Description of Work

Price Schedule: Items mentioned at Schedule ‘(I)’: • Items based on DSR 2023 for civil works, • Non-Scheduled Market rate Items of Civil work.

E NIT_CWC/RO-JAI/ENGG/2026-27/02

Upgradation of road along weighbridge & Office Block to M-40 Paver Block road and repairing patch near godown no. 3 at CW Kotputli

Description of Work

Price Schedule: Items mentioned at Schedule (II): • Items based on Market for civil works,

E NIT_CWC/RO-JAI/ENGG/2026-27/02

Upgradation of road along weighbridge & Office Block to M-40 Paver Block road and repairing patch near godown no. 3 at CW Kotputli

Description

Total of Schedule (I)

Total of Schedule (II)

Total of all Sub Schedules A(I) {In Figures}

Total of all Sub Schedules A(I) {In Words}