PROVISION OF PARADE GROUND 60M X 40M SIZE AND MAIN GATE ALONG WITH 04 NOS SECURITY WATCH TOWERS WITH 360 DEGREE SEARCH LIGHT AT 22 ACRES ICG LAND AT BHERAI VILLAGE PIPAVAV

Amount

SCHEDULE "A" Part - I (BUILDING / STRUCTURE WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II (SITE CLEARANCE, AREA DEVELOPMENT, EXCAVATION & EARTHWORK) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL ELECTRIC SUPPLY ) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (SECURITY WALL AND GATE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (PARADE GROUND/HARDSTANDING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (EXTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -VII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

HIGH SECURITY WALL:- S&F Aluminium Composite panels in all colours, any shape, of approved brand for external internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 3mm thermoplastic core of anti oxidant LDPE sandwiched between two sling of 0.50 mm thick alloy sheet making a total sheet thickness of 4 mm. The surface shall be finished with PU base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to brick/ stone/ masonry/RCC walls/framed structure with necessary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with GI square pipe of size 25mm x 25mm with 1mm thickness in 600mm x 600mm size of grid including stainless steel screws, nut bolts, washers, cleats, weather silicon sealent for groove filling, backer rods etc, complete all as per manufacturer instruction and all as specified and as directed by Engr-in-Charge. All clamps and brackets shall be hot dipped galvanised minimum 20 microns, (items include cost of GI frame, ACP Panels, Cramps, weather sealant, gasket, foam, fixtures, scaffolding, all machineries and any fastening strips, nuts, bolts, rivets, washers, etc., complete all as specified and directed

M & L Writing stainless steel letters or figures or logo made of SS Grade -316 (Block,Roman,italic or Indian) or in Devnagri of height 30 cm high with stainless steel metal emboss, front face should be retro reflective finish, incl chiselling for letters and fixing with SS screw and silicon on granite surfaces, complete all as specified and directed by Engr-in-charge.

S&F Acrylic letters/Figure/ logo, computerised laser cut, outdoor type, each retro reflective letter of height 30 cm and width 20 cm, with back glow LED lights with superior quality LED strip with water proof DC adapter, brighness controller, LED Module, timer and point wiring for each letters with wiring of colour matching and Point wiring complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable for One 3 pin 6 Amps socket outlet on same board, including installation at site on wall or over porch for LED signage board, complete arrangement and wiring should be waterproof, colour and size complete all as specified and directed.

S & F punched concertina coil 610 mm dia using high tensile spring steel wire 2.60 mm dia as per IS-4454 and steel tape in 19 mm width as per IS-513, with and including 18 micron zinc coating (Each coil is to be expanded upto max of 16.0m length) to be placed over Y-shaped MS angle bracket complete all as specified and directed.

PARADE GROUND/HARDSTANDING:- M & L for construction of dry lean cement concrete subbase or base over a prepared subgrade or subbase or base with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate , optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with screed board concrete vibrator, finishing and curing incl formwork complete all as specified and as directed

Supply only Polyster triangular synetheic fibre 6/12 mm long with circum circle diameter 30-35 micron designed for melting point 240-260 degree celsius having specific gravity 1.34 to 1.40 Recron 3S manufactured by M/s Reliance Industries Ltd Mumbai or M/s Finolex Industries Ltd or Equivalent as secondary reinforcement in all type of concrete @ 0.25 % by weight of cement complete all as specified and directed.

INTERNAL ELECTRIC SUPPLY:- Supply and fixing 11W recess mounted die cast aluminium downlighter with high transmission diffuser of Make:Wipro or its equivalent complete all as specified and directed.

Supply and fixing Supply and fixing ceiling fans complete with blades, down rods,electronic regulator and accessories, 230 V of size 1400mm with Min Air delivery 245 CFM and service value 6.0 Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

EXTERNAL ELECTRIC SUPPLY:- Supply, Installation and Testing Automatic axis control barrier (IP54) for bear length den (Beam Max), activation system Song bydrant pump unit, planger, piston equalizer and transmission shaft, balancing by compression spring, single phase 230 Volt AC supply operated th-directional motor complete all as specified and directed. Make FAAC 640 (LH/RH)Godrej

S&F 300 watts LED Search light, high intensity, energy saving, long range, multi-functional, auto-swivel LED search light, beam range 700 meters, 1300w in multi cuircuit LED, Efficacy> 110 Im/w, CCT 5500K, LM6 housing with heat ink round in shape, dia >440mm, operating voltage 90V- 300V, 50hz, PF 0.95, THD 10% CCT 5500K, CRI>70 Optics used PMMA/PC lens, LED efficacy 140 Uw, average lux level at 10meter> 9000 with circle of approx Imeter, toughened clear glass with silicaon gasket, over volt / under volt & short circuit protected, confirming to LM79, LM10 IK07, IP66, IS 10322 pts secs (Type Tested) and BIS approved. This search-light should be installed on dne of revolving mechanism with suitable motor-gear unit and designed to rotate 360 continuously over the night in horizontal plane with speed controller (1 to 10 rpm), auto/ manual, Rev. / Forw, and Up/Down push buttons for tilting upto 45 degree A separate wall mounted wired control panci (consist of MCB's, V-meter, Fuse, LED indicators) is supplied for smooth & safe operation remotely. The revalving mechanism is fully covered with weather & rust proof fiber box with maintenance window/ door, provision of foundation holes at bottom for proper installation complete all as specified and directed.. Make Kalin Cat No MRSL-LRFLL-25PC30 or its equivalent in Sigma

M&L for Multi standard Copper Conductor cable of 6 Sq mm 3 Core size, drawn through HDPE conduit/PVC Conduit of size 25 mm dia inclusive of all tees, bends, elbows, reducers and fixing accessories such as couplers, lock nuts, saddles, pipe books etc. for interconnection of cable light/looping box to fight etc. complete all as specified and directed. Make- Polycab/Plaza/Havells/ RR Kabel

Supply and lay 50/38 mm Double Walled Corrugated (DWC) Pipes having corrugation on the outer wall and plain surface on the inner wall confirming to 1S-14930 (Part-11) for protection of UG cables, laid in trenches/ road/ drain or fixed along wall, poles or faid under floor complete all as specified and directed by Engr-In-Charge. Make Rex/Poly/Gemini

M&L for cutting existing road/hard standing not exc 45x45 cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well rammaing watering finish suraface 10 cm from top using PCC 1:3:6; including removal of surplase soil complete all as specified and directed.

M/S. P.M GODHANIYA

JAMNAGAR ELECTRIC AND MACHINERY CO