Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC PLOT NO 17 GF PRATAP NAGAR NEW DELHI 110064 | WEST | DELHI | 110064 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹47.2 L+₹4.2 L (9.83%)Rejected-Finance H NO 154 VILLAGE SHIKARPUR PO NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L2 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 3 | L3₹47.8 L+₹4.8 L (11.2%)Rejected-Finance G 124 FLAT NO 4 DILSHAD COLONY DELHI 110095 | SHAHDARA | DELHI | 110095 | L3 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 4 | L4₹69.2 L+₹26.2 L (61.0%)Rejected-Finance | L4 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 5 | Rejected-Technical H NO 2702 JHANDA CHCOWK PURANI BASTI RANJHI JABALPUR M P 482005 | JABALPUR | MADHYA PRADESH | 482005 | - | Rejected-Technical Enlistment letter, GST Registration Certificate of M/s Rastogi Builders are uploaded in lieu of applicant contractor M/s R R Vishwakarma Construction Co. EPF Registration also not uploaded |
Tender Value
₹49.8 L
EMD Value
₹99,540
Closing Date
2 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
BARRICADING AND OTHER B/R NATURE MAINT WORKS FOR PM RALLY OF DGNCC CAMP AND CERTAIN B/R REPAIR AND MAINT OF BLDGS AT ARTY OFFRS MESS, PARADE ROAD, RPSO COMPLEX AND OTM ACCN IN THE AREA OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10
2023_MES_606259_2
GE/DE-41/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹99,540
Yes
3 Oct 2023
5 Aug 2023
4 Sept 2023
5 Aug 2023
2 Sept 2023
19 Aug 2023
Amount
Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.
Transporting and fixing only of wooden post and placing in position and fixing of wooden post including treatment of wooden post below gound level with hot mixture of tar and creosote in proportion of 20kg of coal tar to 20kg of cresote and paintng one coat of synthetic enamel paint on posts on portion above ground level. (size of post is 10cmx10cmx1.65mtrs) complete all as specified and as directed. (Note :- Excavation and earth work shall be measured measured separately in item No 1 above (Posts shall be issued to contractor free for fixing) and shall be return to MES store after completion of work).
Transporting and fixing only GI Tubing 40 mm dia, placing and fixing in position with mild steel clamps & bolts to wooden posts, complete all as specified and as directed. (NOTE : GI Pipes, clamps and bolts shall be issued as free for fixing only and shall be return to MES store after completion of work).
Transporting and taking out/down after use, GI tubing 40 mm dia including mild steel clamps, bolts nuts etc., and removing from site and depositing to respective MES store yard and stacking properly, complete all as specified and as directed.
Transporting and taking out after use, wooden post of any description embeded in ground and making good embeded portion of disturbed ground and removing the wooden post to respective MES store yard and stacking properly, complete all as specified and as directed. Note : (Wooden posts shall be obtained from item No 2 here in before.)
Transportation and fixing only welded mesh to MS angel iron frame size 300cmx165cm height, placing and fixing in position including one coat of aluminium paint, complete all as specified and as directed. (NOTE : 1. Welded mesh with angle iron frame shall be issued as free for fixing only and shall be return to MES store after completion of work.)
Transporting and taking out after use, welded mesh frame including embeded portion and making good disturbed ground and depositing the same to MES store Yard and stacking properly, complete all as specified and as directed.
Transporting and fixing only of GI pipe frame of 40mm dia and placing in position and fixing complete including one coat of aluminium paint size of frame 2.95 to 3.05m long and 1.5m high, complete all as specified and as directed. (NOTE : GI frame shall be issued as free for fixing only and shall be return to MES store after completion of work).
All as per description of Srl item No. 8 here-in-before but size of frame 2.85 m long and 1.5m high, complete all as specified and as directed. (NOTE : GI frame shall be issued as free for fixing only and shall be return to MES store after completion of work).
All as per description of Srl item No. 08 here-in-before but size of frame 1.5 m long and 1.5m high, complete all as specified and as directed. (NOTE : GI frame shall be issued as free for fixing only and shall be return to MES store after completion of work).
Taking out after use, embeded frames of GI tubing any size including making goood disturbed ground and depositing the welded frame to MES store yard with transportation and stacking properly, complete all as specified and as directed.
Transportation and fixing only steel wire fabric frame of size (1.5m x0.9m), placing and fixing in position of steel wire fabric and frame with nuts and bolts to the MS pipe posts and paintig one coat of aluminium paint, complete all as specified and as directed. (NOTE : Steel wire fabric frame shall be issued as free for fixing only and shall be return to MES store after completion of work).
Dismantling after use and Transporting of steel wire fabric frame from MS pipe stand and depositing to MES store Yard and stacking properly, complete all as specified and as directed.
Supply and fixing in replacement 50mm dia 6.10mtr long, 3-4mm thick galvanised iron tubing medium grade with fitting used for flag pole including preparation and application of two coats of aluminum painting over one coat of red oxide primer complete all as specified and as directed. (Note: Purchase voucher of GI Pipe shall be submitted by the contractor duly defaced by Engr-in-Charge while submitting claim for advance and final bill).
M&L Welding existing old GI/MS pipes /angle iron frame (length of weld joint exc 5mm but not exc 15 mm joint for barricadding including preparation and finishing the same by painting two coats of synthetic enamel paint complete all as specified and as directed.
Transportation and fixing Welded mesh of mild steel in angle iron frame of size 3000mm length x 1650mm height including placing and fixing in position after applying two coats of aluminium paint over a coat of red oxide, complete all as specified and as directed. (NOTE : Welded mesh of mild steel shall be issued as free for fixing only and shall be return to MES store after completion of work).
Dismantling after use and Transporting of welded mesh of mild steel in angle iron frame and depositing to MES store Yard and stacking properly, complete all as specified and as directed.
Transporting and fixing only Stainless Steel square poles of 150mm size width and 1.50mtr height, placing and fixing in position complete including polishing of SS poles all as specified and as directed. (NOTE : SS Poles shall be issued as free for fixing only and shall be return to MES store after completion of work).
Dismantling after use and Transporting of stainless steel poles and depositing to MES store Yard and stacking properly, complete all as specified and as directed.
Transportation and fixing Welded mesh of stainless steel in angle SS frame of (Overall area of frame with mesh not exceeding 4.00 SQm) including placing and fixing in position after polishing of SS complete all as specified and as directed. (NOTE : Welded mesh of stainless steel with frame shall be issued as free for fixing only and shall be return to MES store after completion of work).
Dismantling after use and Transporting of welded mesh of stainless steel in stainless steel frame and depositing to MES store Yard and stacking properly, complete all as specified and as directed.
S & F in repairs for stainless steel 'Q' Master of 350mm dia base, 1.00 Mtr height 50mm dia stainless steel pole and 50mm width 2.5 Mtr long enclosure strip complete all as specified and as directed by Engr-in-Charge.
M & L for Plain Cement concrete 1:3:6, type C-1 using 20 mm graded crushed stone aggregates as in bed blocks and sides of base plates, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete including demolition of existing PCC of any type complete.
S & F for Mild Steel Base plates for poles, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete including dismantling of existing MS iron of any type and in any position all as specified and as directed
Providing and applying the plaster with single complaint ready to use repair mortar (SMART CARE REPAIR MORTAR) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat : SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 Kg Cement/Sqm of surface area mixed with specified portion of AP SMARTCARE repair polymer incl taking down existing roof treatment of any type and also taking down cement plaster on concrete surfaces, incl raking out joints, hacking for key, scrubbing down with water etc. to receive further treatment complete all as specified and as directed. Make :- Asian Paints or equivalent in Sikka, Forsroc and Berger. Note: The application shall be executed on any type of surface and on Horizontal/Vertical areas.
Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers.(4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.
M & L for preparation of any type of surfaces old/new or in any position and applying two coats of indigo floor paint as directed by Engr-in-Charge and at site complete (Make : Asian Paints/Berger/Indigo)
M&L for diamond cut, diamond pre-polished kota stone slab 18-20mm thick, area of each stone slab exceeding 0.30 Sqm and not exceeding 0.49 Sqm (as approved by GE) in floors, steps etc laid over and including cement screed base 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including moulding & bull nosing on the edges and polishing complete including dismantling of existing kota stone and screed bed (bedding but not backing) all as specified and directed.
M & L for Cutting and polishing of kota stone/Granite/Dholpur stone or any type of flooring, skirtings,dado or any type of vertical walls (upto a height of 10Mtr) including cleaning of splashes of cut stone and any other materials on walls as per site requirement, complete all as specified and as directed.
M & L for preparation of old painted corrugated or plain steel or iron surfaces (Roof top upto a height of 15 mtrs) of any description over 10cm width or girth and applying two coats of synthetic enamel paint (Green/Blue/Red or white colour as per requirement at site and as directed by Engr-in-Charge) complete all as specified and as directed. Note : Cost of all requisite scaffolding, ladders and safety gear required for execution of work shall be deemed to be included in the quoted rates of above item)
M & L for preparation of black top surfaces of road by cleaning with air blower and applying 1.5mm thick road marking paint strips, dahses, arrows letters etc upto 10cm wide or more (retro-reflective) of white or golden yellow shade/colour using hot thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and driven by experienced operator on road surface including cleaning all loose dirt, seals, oil greases and foreign materials etc complete all as directed by Engr-in-Charge and as per applicators specifications-Asian Paints or equivalent.
M & L for one coat of synthetic enamel paint, any tint on old painted plastered surfaces or brick, stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth including preparation of old painted surfaces and filling of holes with putty and 1-2mm thick wall care putty, complete all as specified and as directed.
Taking down cement or cement lime plaster , any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and smooth without using extra cement in any position incl scafolding etc, complete all as specified and as directed.
M & L for preparation of new plaster external wall and ceiling surfaces of and applying Two coats of 100% Premium/Ist quality acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer applied and 1mm thick wall care putty complete all as specified and as directed. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Make Shall be approved by GE. Make: BERGER (WEATHER COAT ALL GUARD), ASIAN PAINTS (APEX ULTIMA), NEROLAC (EXCEL TOTAL)
M & L for preparation of plastered or unplastered old decorated surfaces of wall and ceiling including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with Wall Care Putty and applying One coat of premium/Ist quality exterior acrylic emulsion paint of any tint all as per manufacturers instructions to achive desired finish at any height complete all as directed. Note :- 1. Stage for prepration of surfaces shall be got approved from GE before applying the finishes. 2. Make Shall be approved by GE. Make: BERGER (WEATHER COAT ALL GUARD), ASIAN PAINTS (APEX ULTIMA), NEROLAC (EXCEL TOTAL)
M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete.
M & L for coloured Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over 15mm thick screed bed in CM 1:6 including demolition of existing flooring or tiles of any type and size complete all as specified and as directed.
M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) confirming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid dry in floor/path incl demolition of existing flooring or tiles of any type of any size complete.
S & F for PVC hollow wall panelling 7 to 8 mm thick wood grain teak finished prelaminated inclusive of fixing to wall incl moulding end caps fixed with PVC sleeves and screws as required at site including taking down existing panelling of any type complete all as specified and as directed.
M & L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete.
S & F designer board false ceiling of size 600x600x4mm thick white prelaminated sett embosed reinforced tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified.
M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.
S & F Aluminium powder coated windows including aluminum powder coated frames three track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 kg/RM double revated and 0.55 Kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.
S & F Aluminum powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mmx2.1mm, shutter top section 47.62mm x 44.45mmx1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 kg/RM) incl shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete all as specified and as directed.
S&F aluminium powder coated glazed or skelton shutter including frame channel of section ( door frame single groove 85mmx45 mm x 1.25mm thick, shutter top section, bottom section, middle section and vertical section 65 mm x 45 mm x 1.25 mm thick and glazing clips weighing not less than 0.097 Kg/RM ) including shutter fixed to openable frame and channel as directed and as per IS specifications including S & F stainless steel wire cloth as required handles, tower bolt, door closer, locking arrangement Godrej, rubber gasket and door stopper complete.
S & F for Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (1-0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one vertical length in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1-0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fastners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selelcted quality glass, Aluminium track on bottom rail to be of hree track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. complete all as specifed and as directed. (Note:The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)
S & F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by Engr-in-Charge..
S & F 100mm size butt hinges stainless steel complete all as specified and as directed.
S & F 150 mm size aluminium handles cast type anodised complete all as specified and directed
S & F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F Aluminium ( Die cast ) body door closer hydraclically regulated designation No. 3 universal type suitable for door shutters of 701 to 850mm in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed.
S & F floor mounted aluminum body door closer hydraclically regulated designation No. 3 universal type suitable for revolving type door of 701 to 1200mm in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed.
S & F steel rolling shutters (Push pull or manual type) 1.25 mm thickness of laths, with required ball bearing for rolling shutter including shaft, top cover, guide channel (width 75 mm deep, 50mm wide and 3.15 mm thick) anchoring rod, hasp and staple, locking arragement erected in position as indicated complete including taking down existing shutter all as specified and directed.
S & F Steel rolling shutters (Gear operated)1.25mm thick with required Ball bearing for rolling shutters, including shaft, top cover, guide channel (width 75 mm deep, 50mm wide and 3.15mm thick), anchoring rod, hasp and staple erected in position as directed complete including required bevel gear box and crank handle Safety lever locks mild steel with 4 levers for rolling shutters complete including taking down existing shutter all as specified and as directed.
S & F 2 mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc and including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering, complete all as specified and as directed. complete all as specified
M & L for Non-Skid coloured ceramic tiles 7-8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete.
M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm tile not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L Coloured Glazed ceramic tiles in vertical surface 300 x 200 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10 mm thick screed bed in CM 1:3 and including dismantling of existing tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L Coloured Glazed ceramic tiles in vertical surface 450 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10 mm thick screed bed in CM 1:3 and including dismantling of existing tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L Coloured Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10 mm thick screed bed in CM 1:3 and including dismantling of existing tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L for coloured wall cladding tiles of size overall area exc 0.11 Sqm but not exc. 0.36 Sqm of 8-10mm thick on vertical surfaces of wall laid over and including 10mm thick rendering and as per sample approved by GE including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and as directed.
M & L for 16-18 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 10 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete.
M/s Shubh Enterprises
sunil traders
tarun construction co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .