Loading…
Loading…
Tender Value
₹14.0 Cr
EMD Value
₹28.0 L
Closing Date
17 Aug 2026, 2:00 pm
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
BUILDING
15 conditions · 4 needing a document upload
For works costing more than Rs.50 Lakhs:The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less; where V = Advertised value of the tender in crores of Rupees. N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Non submission of the above,the offer will be summarily rejected.(Ref : Advance Correction Slip No.1 dt:14/07/2022 to IRSGCC- 2022 ).
Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-VI
51 conditions · 9 needing a document upload
Whether required test certificates/samples, if any have been uploaded?
Tenderers are requested to ensure the uploading of mandatory documents under the relevant tabs as per check list and put(tick) mark wherever applicable as per CE/Works/Chennai letter No.W.496/Tender policy dt.03.07.2023. The check list is available under DOCUMENTS tab. The check list is only exhaustive. Tenderer should ensure that all the documents required as per relevant clauses are uploaded. The mere submission of documents mentioned in the check list alone will not qualify for the eligibility of the tender.
Multiple L-1 :- In case of more than one L-1 bidders, tender may be awarded to tenderer having higher bid capacity. In case bid capacity is also the same, tenderer having done more value of similar work in last three previous financial years and the current financial year up to the date of opening of tender may be selected for award. Railway reserves the right and may seek the above details within specified period, if not submitted by the tenderers along with the bid.
The contractor should ensure that the staff employed are physically fit, with a sound mind and of good character. To this effect, necessary police clearance certificate should be obtained from local police authorities before the contractor's staff are put into service. This will be in accordance with the Railway Board Letter No. 2020/Sec(CCB)/45/50/Misc Dt.03.02.2020. Refer Annexure I & II.
Advance Correction Slip No.11 to the Indian Railway Standard General Conditions of Contract (April 2022) has been incorporated and copy uploaded for reference.
Bidders are requested to submit the Performance Guarantee (PG) strictly in accordance with the new prescribed format and within the stipulated timeline to avoid any delay in processing. (Copy enclosed)
All the contracts on works/goods/services will be subject to the new GST act as applicable from time to time. Contractors have to register themselves with GST authorities and to furnish the GST registration number in order to process the bills from 01.07.2017
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Deployment Of Qualified Engineers At Work Sites By The Contractor. The contractor shall also employ Qualified Graduate Engineer or Qualified Diploma Holder Engineer, based on value of contract, as may be prescribed by the Ministry of Railways through separate instructions from time to time.(As per RB ltr no.2012/CE-I/CT/O/20 dt:10.05.2013)
One qualified Graduate Engineer when the cost of the work is Rs. 200 lakhs and above.
One qualified Diploma holder Engineer when the cost of the work to be executed is more than Rs.25 lakhs but less than Rs.200 lakhs.
In case the contractor fails to employ the technical staff as aforesaid, he shall be liable to pay a an amount of Rs.40,000/ (Rupees Forty thousand) for each month or part thereof for the default incase of Graduate Engineer and Rs.25,000/- (Rupees Twenty five thousand) for each month or part thereof for the default in case of Diploma holder (Engineer)
I/WE also hereby agree to abide by the INDIAN RAILWAY GENERAL CONDITIONS OF CONTRACT- April 2022, with all correction slips up to date and to carry out the works accordingly.
Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work.
I/We also agree to keep this tender open for acceptance for a period of 90 days from the date fixed for opening the same
I/We offer to do the work for DRM/W/O/SA, at the rates quoted in the attached schedule and hereby bind myself/ourselves to complete the work in all respects within the period of completion stipulated in the tender document, from the date of issue of letter of acceptance of the tender. The Bid security shall stand forfeited without prejudice to any other right or remedies in case my/our Tender is accepted and if : (a) I/We do not execute the contract documents as stipulated in performance guarantee clause of GCC as detailed in general instructions. (b) I/We do not commence the work within seven days after receipt of orders to that effect.
I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter-se ranking
However, Railways shall have the right to incorporate any such condition quoted by us, in the contract, at their discretion, if contract is placed on us.
I/We have read the various conditions attached/ referred to in this tender document, and agree to abide by the said conditions.
A tenderer claiming credentials as an individual for their share in a partnership firm, has to submit both the deeds of (i) partnership deed, showing % of their share and (ii) retirement deed from the partnership firm(or) deed showing the closure of business operations of the partnership firm, as applicable. Failing to submit the above deeds, the offer of the tenderer will be summarily rejected.
The tenderer shall clearly specify whether the tender is submitted on his Own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) I Registered Society/ Registered Trust / Hindu Undivided Family( HUF) / Limited Liability Partnership (LLP) etc. , The tenderer(s) shall enclose the attested copies of the requisite documents (including Power of Attorney, if opted) for constitution of their concern as per Cl.14 of GCC-Part-l and as per a)Clause 17 of GCC - Part-1, for JV b)Clause 18 of GCC - Part-I, for Partnership Firm.
Copies of the following documents are to be uploaded: (i) Details such as Name of the tenderer/ Contractor, Validity of DSC, Complete address with pin code, contact number (ii) Copy of PAN card (iii) Copy of GSTIN card.
A copy of NEFT form duly filled in the details as necessary to be uploaded. (The Tenderer/Contractor not having NEFT form may down load the empty NEFT form available in Document site)
Submission of physically signed Annexure-V by the tenderer is discontinued vide Rly Bd letter dt:14/05/2024 (Uploaded)
Submission of Annexure-V(A) under Document Verification Certificate. In case of other than company/Proprietary firm, Annexure-V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) /Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc., as the case my be. Non-submission of the above Certificate(s) by the bidder shall result in summarily rejection of his/their bid
(1) SA Divn: Raising of platform at MKSP( NSG6), MLYR (HG2) and KKTI (HG2) stations in SA-VRI section. (2) Raising & Extension of platforms at PDKM (NSG6) & VGE (HG1) stations and Raising of Platforms at PRV: PF-2 (NSG6) & SRVT (HG2) stns in SA-VRI section.
SA-OT-08-2026-02
SA-OT-08-2026-02
Open
Works - General
12 Months
Salem, Tamil Nadu
₹0
₹28.0 L
25 Jul 2026
25 Jul 2026
3 Aug 2026
153 items across 6 schedules · ₹6,94,80,471.36 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 2033.84 | 260.3 | 5,29,408.55 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 9.55 | 196 | 1,871.8 |
| 3 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 64.57 | 700.5 | 45,231.29 |
| 4 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 320.48 | 7,294.7 | 23,37,805.46 |
| 5 | Foundations, footings, bases for columns | Sqm | 240 | 392.15 | 94,116 |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 15.04 | 392.15 | 5,897.94 |
| 7 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 1070.4 | 842.5 | 9,01,812 |
| 8 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 5.69 | 927.25 | 5,276.05 |
| 9 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 23.8 | 736.4 | 17,526.32 |
| 10 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 110.16 | 961.3 | 1,05,896.81 |
| 11 | 50 mm thick | Sqm | 225 | 1,886.9 | 4,24,552.5 |
| 12 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 227.28 | 9,504.75 | 21,60,239.58 |
| 13 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 8.6 | 9,860.4 | 84,799.44 |
| 14 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 77.84 | 733.5 | 57,095.64 |
| 15 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 222.44 | 7,132.25 | 15,86,497.69 |
| 16 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 921.57 | 9,105.95 | 83,91,770.34 |
| 17 | cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm | 2.5 | 905.05 | 2,262.63 |
| 18 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 857.6 | 7,311.25 | 62,70,128 |
| 19 | Area of slab upto 0.50 sqm | Sqm | 20.31 | 5,413.5 | 1,09,948.19 |
| 20 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 16.73 | 1,267.95 | 21,212.8 |
| 21 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 125 | 238.35 | 29,793.75 |
| 22 | 125x64x1.90 mm | Each | 2 | 118.2 | 236.4 |
| 23 | 200x10 mm | Each | 3 | 99.7 | 299.1 |
| 24 | 150x10 mm | Each | 3 | 82.55 | 247.65 |
| 25 | Using R1 series with frame (33mm & above ) x (35mm & above). (Height upto 0.90 meter) | Sqm | 1.8 | 8,247.25 | 14,845.05 |
| 26 | 200 mm | Each | 2 | 186.65 | 373.3 |
| 27 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 1350 | 117.35 | 1,58,422.5 |
| 28 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 9329.7 | 133.7 | 12,47,380.89 |
| 29 | Electric resistance or induction butt welded tubes | Kg | 3278.16 | 194.4 | 6,37,274.3 |
| 30 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg | 1141.78 | 97.2 | 1,10,981.02 |
| 31 | Providing and fixing bolts including nuts and washers complete. | Kg | 564.88 | 159.35 | 90,013.63 |
| 32 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 750 | 772.4 | 5,79,300 |
| 33 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | 12 | 8,595.15 | 1,03,141.8 |
| 34 | Dark shade pigment using ordinary cement | Sqm | 2339.79 | 1,119.5 | 26,19,394.91 |
| 35 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 18.64 | 1,096.55 | 20,439.69 |
| 36 | 110 mm diameter | Metre | 2936 | 377.4 | 11,08,046.4 |
| 37 | 110 mm bend | Each | 1 | 150.35 | 150.35 |
| 38 | 110 mm Shoe | Each | 3 | 131.85 | 395.55 |
| 39 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 885 | 738.65 | 6,53,705.25 |
| 40 | Ridges plain (500 - 600mm) | Metre | 179.2 | 532.35 | 95,397.12 |
| 41 | Gutter (600 mm over all girth) | Metre | 21 | 1,313.7 | 27,587.7 |
| 42 | 1:6 (1 cement: 6 fine sand) | Sqm | 5275.66 | 333.35 | 17,58,641.26 |
| 43 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) | Sqm | 5275.66 | 160.6 | 8,47,271 |
| 44 | Two or more coats on new work | Sqm | 122.88 | 155.9 | 19,156.99 |
| 45 | Two or more coats on new work | Sqm | 435 | 146.8 | 63,858 |
| 46 | Lettering with black Japan paint of approved brand and manufacture | per letter per cm height | 13680 | 6.15 | 84,132 |
| 47 | Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) | cum | 130.15 | 1,503.6 | 1,95,693.54 |
| 48 | In cement mortar | cum | 253.69 | 2,060.2 | 5,22,652.14 |
| 49 | R.C.C. | Each | 490 | 243.3 | 1,19,217 |
| 50 | Thickness above 40 mm up to 75 mm | Sqm | 1168 | 433.55 | 5,06,386.4 |
| 51 | Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in- Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) | per cm depth per cm width per metre length | 13350 | 5.3 | 70,755 |
| 52 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in- charge and accordance with applicable specifications. | Sqm | 60 | 747.8 | 44,868 |
| 53 | Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in- charge. (The panel shuttering work shall be paid for separately). | cum | 1601.51 | 9,823.8 | 1,57,32,913.94 |
| 54 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 2 | 1,879.2 | 3,758.4 |
| 55 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 2 | 1,607.95 | 3,215.9 |
| 56 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms | Each | 1 | 673.4 | 673.4 |
| 57 | 25 mm nominal dia Pipes | Metre | 60 | 401.55 | 24,093 |
| 58 | 20 mm nominal dia Pipes | Metre | 36 | 274.3 | 9,874.8 |
| 59 | 25 mm nominal dia Pipes | Metre | 330 | 355.4 | 1,17,282 |
| 60 | 40 mm nominal dia Pipes | Metre | 1335 | 563.05 | 7,51,671.75 |
| 61 | 100 mm nominal dia Pipes | Metre | 144 | 3,271.7 | 4,71,124.8 |
| 62 | 20 mm nominal bore | Each | 6 | 379.2 | 2,275.2 |
| 63 | 25 mm nominal bore | Each | 72 | 622.4 | 44,812.8 |
| 64 | 40 mm nominal bore | Each | 6 | 826.1 | 4,956.6 |
| 65 | 25 mm nominal bore | Each | 6 | 464.05 | 2,784.3 |
| 66 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. | Each | 6 | 111.45 | 668.7 |
| 67 | Frame size 45 x 70 mm | Metre | 8.4 | 705.85 | — |
| 68 | 30 mm thick | Sqm | 8.4 | 4,346.7 | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ANNEXUREIIIFORPOLICEVERIFICATION.pdf
ATTACHMENT
SPECIFICATIONFORBUILDINGSBRIDGEWORKSDEC2025.pdf
ATTACHMENT
TrackStandardDocument20122022.pdf
ATTACHMENT
RBCECEICTImplementationofContractoremb.pdf
ATTACHMENT
NewFormatofBG.pdf
ATTACHMENT
ANNEXUREVVAVIAVIB.pdf
ATTACHMENT
GCCApril2022NEW.pdf
ATTACHMENT
INSTRUCTIONSTOTHETENDERER.pdf
ATTACHMENT
ProcedureforLetterofCredit.pdf
ATTACHMENT
Workonhanddetails.pdf
ATTACHMENT
SafetyprecautionstobeadoptedwhileworkinginElectrifiedArea.pdf
ATTACHMENT
Splconditionsofcontractformovementofvehicle.pdf
ATTACHMENT
ACS1to10.pdf
ATTACHMENT
ACS112026_compressed.pdf
ATTACHMENT
CheckListandNEFTform.pdf
ATTACHMENT
RlyBdletterClarificationofAnnexureV.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].