SPECIAL REPAIR TO INTERNAL ROAD UNDER AGE B/R-I AT GE GWALIOR

Amount

Scarifying or picking up gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 Sqm & depth exceeding 50mm and not exceeding 100 mm deep and removing a distance not exceeding 50 mtr and stacking serviceable materials etc complete all as specified and directed.

M&L for providing 150mm thick in two layers each layer 75mm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required, type of stone granite, trap or basalt complete all as specified and directed.

All as per item No 2 above but except materials (Materials may be obtained from item No 1 shall be used).

M&L for premix bituminous macadam using paving bitumen (VG-30) binder content of 4% by weight of total mix any penetration, laid/rolled and compacted to required gradient and camber (consolidated thickness 50mm or less) complete all as specified and directed.

M&L for preparing black top surfaces by brusing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and making true dust free surface, applying evenly a priming/tack coat with bituminous primer (Paving bitumen VG-30) @ 5 Kg per 10 Sqm on existing black top and providing bituminous semi dense asphaltic concrete (Design Mix) 30mm consolidated thickness using 5.5% of binder content by weight of total mix, using paving bitumen VG-30 laid/spread uniformly by means of mechanical pavers over black top surfaces & rolled with 8 to 10 ton power roller & compacted to required camber and gradient complete all as specified and directed.

M&L for preparing WBM by sweeping with brooms and finally fanning the cleaned surfaces with air comprssor to remove all loose dirt etc and making true dust free surface, applying evenly a priming/tack coat with bituminous primer (paving vitumen VG-30) @ 10 Kg per 10 Sqm and providing bituminous semi dense asphaltic concrete (Design Mix) 30mm consolidated thickness using 5.5% of binder content by weight of total mix, using paving bitumen VG-30 laid/spread uniformly by means of mechanical pavers over black top surfaces & rolled with 8 to 10 ton power roller & compacted to required camber and gradient complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n.exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and directed

M&L for Providing cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) as in Coping/bed block complete all as specified and directed.

S&F in repair machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness. M-40 Grade with grey cement and pigment over 50mm sand cushion (the sand cushion shall be paid separately ) complete all as specified and directed. Make : NITCO / NTC / MEHTAB.

M&L for sand filling under floors including watering and consolidation etc complete all as secified and directed.

M&L for 75 mm thick cement concrete type D-2, 1:4:6 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Rolling and consolidating formation surface in cutting with power road roller exc 8 tonne & not exc 12 tonne including necessary preparation for surface excavation to required gradient & camber complete all as specified and directed.

Removing excavated material (soils)n exc. 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

S&F in repair for solar delineator size 1000x47mm is made of polycarbonate and toughened aluminium alloy body and height 145mm, dia 80mm comprises of 4 super bright LEDs which give 360 degree viewing incl solar panel 2.5V, 120mm (approx) 1.25V rechargeable battery - 1 No incl surface dressing and PCC 1:2:4 using 12.5mm graded aggregate complete all as specified and directed. Make : Sinor / Dark Eye / 3M Road Knight / Avery Dennison Road Sign / Greenlite.

S&F in repair for solar road stud LED based intelligent road studs of size 125x125x25mm (Model : DA110-DHRUV) made from aluminium alloy and construction. One high capacity NI-Cd rechargeable battery with view distance approximate 1000m, LEDs 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colour back up 12 hours of continous lighting at night incl fixing with epoxy screed bed all as per manufacturer direction or directed by Engr-in-Charge. Make : Sinor / Dark Eye / 3M Road Knight / Avery Dennison Road Sign / Greenlite.

S&F in repair ABS engineering plastic road speed breakers dynamically designed having high impact reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and size 750x75x250mm incl fixing with epoxy screed bed all as per manufacturer direction or directed by Engr-in-Charge. Make : Snior / Dark Eye 3M Road Knight / Avery Demison Road Sign / Greenlite / Speed Breakers or its equivalent (Model No DA 1006).

S&F in repair convex mirror 1000mm dia made of PC material provided with suitable MS pipe post of 75 mm dia medium grade with 3 Mtr long, duly powdered coated/painted as per site requirement, clear & definite mirror, image having 130 degree of viewing angle, unbreakable and stronger than glass, incl surface dressing and PCC 1:2:4 using 12.5mm graded aggregate (size of post holes = 450mmx450mmx600mm) complete all as specified and directed. Make : Sinor / Dark Eye / 3M Road Knight / Avery Dennison Road Sign / Greenlite.

S & F in repair Retro reflective Studs (Cats Eyes) of size (90 mm X 110 mm X 17 mm Approx.), on existing road surfaces complete all as specified and directed.

RADHIKA DEVELOPERS

M/s Bijender Singh

Shapers Constructions Limited

M/S R.S.BUNDELA & SONS