Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
21 Sept 2026, 5:30 pm
North Western Karnataka Road Transport Corporation
T. L. Srinath
Supply of Air Suspension Parts to the divisions of the NWKRTC.
NWKRTC/2026-27/IND0204/CALL-2
NWKRTC/2026-27/IND0204/CALL-2
Open
Two Tender Document System(Two Cover)
North Western Karnataka Road Transport Corporation Head Office
16 documents required · 8 mandatory · 8 optional
Suppliers to OEMs should submit purchase order copies along with supporting invoice copies placed by OEMs viz., M/s. Ashok Leyland Ltd., M/s. Tata Motors Ltd., and M/s. Eicher during the preceding three years for tendered items as proof of their status
OEMs OR Supplier to OEMs OR ASRTU RC with OE status (In Case of suppliers to OEM, the items covered in the Purchase Order/ Invoice Copies placed by the OEMs i.e. M/s. Volvo, M/s. Scania, M/s. Corona and M/s. Benze, for the Major / Full Assembly for prescribed the year will only be considered. However, for the child parts, the rates offered by the Suppliers to OEMs for all the items i.e. both Assembly and related subcomponents will be considered provided their status is proved as suppliers to OEMs) OR Other Manufacturers with a minimum Annual Average Turnover of Rs. 4.00 Crores during the preceding three years i.e. 2022-23, 2023-24 and 2024-25 are eligible to participate, duly supported by the Audited Statement of Accounts i.e., Manufacturing / Trading and Profit & Loss Account, Balance Sheets for all the three years. OR Micro and small scale industries with minimum average annual turnover of Rs.2.74 Crores during the preceding last two years i.e. 2023-24 and 2024-25.
ASRTU RC firm should submit valid ASRTU RC with OE Status copy for tendered items as proof of their status.
Manufacturers firms are should upload the Audited Statement of Accounts i.e., Manufacturing/ Trading and Profit & Loss Account, Balance Sheets for all the three years.
Manufacturers firms are should upload the audited statement of account, the tenderer should upload Annual GST return acknowledged by the concerned Tax Authority along with the pre-qualification offer for all the three years
Manufacturers firms are should enclose a Verification Certificate from the Chartered Accountant stating that, the turnover details furnished in the audited statement of accounts have been verified by him and that are found correct. Failure to comply with this condition, the offer will be disqualified
Any bidder from a country which shares a land border with India will be eligible to bid in the tender only if the bidder is registered with the Competent Authority (as detailed at Annexure-B2). In this regard, a compliance certificate/ declaration to be submitted by the bidder on Rs. 20/- & above stamp Paper as per the format at Declaration-III (regarding restrictions on public procurements from bidders of such country/ countries which shares a Land Border with India.
The bidder should undertake to supply the ordered quantity as per the delivery schedule provided, Tenderers who have been blacklisted by any of the Government Organizations / Public Sector undertakings for breach of contract shall not be considered and If the supply and quality performance are not satisfactory in respect of previous / past supplies, the offers of such firms will be disqualified
₹500
₹1 L
4 Sept 2026
21 Aug 2026
23 Sept 2026
28 Aug 2026
28 Aug 2026
NW-26-AIR SPRING ASSLY
NW-26-BUMP STOP
NW-26-TATA BS3 BUMP STOP
NW-26-TATA BS3 CAM PLATE STEEL 12 INCH
NW-26-TATA BS3 CASTLE NUT
NW-26-CIRCLIPS - FRONT AND REAR REACTION ROD
NW-26-COMPOUND LINK PIVOT
NW-26-CORONA 12 INCH ROLLING DIAPHRAGM
NW-26-CORONA HOLLOW SPRING
NW-26-CROSS MEMBER
NW-26-EICH BS4 BUMP STOPPER
NW-26-HARD WASHER - M16
NW-26-HARD WASHER - M20
NW-26-TATA BS3 HEX BOLT - M16X2X150
NW-26-TATA BS3 HEX BOLT ALIEN
NW-26-TATA BS3 HEX BOLT WITH NUT -M16X2X100
NW-26-TATA BS3 HEX NUT - M16X2
NW-26-LEY BS4 AIR SPRING ASSLY
NW-26-LEY BS4 AIR LEVELING VALVE LEVER
NW-26-LEY BS4 LEVELLING VALVE ASSY
NW-26-LEY BS4 LEVELLING VALVE REPAIR KIT
NW-26-LEY BS4 M16 SPRING WASHER
NW-26-LEY BS4 REAR RUBBER AIR BELLOW 12 INCH
NW-26-LEY BS4 RETAINING PLATE
NW-26-LEY BS4 RUBBER PAD ASSLY
NW-26-LEY BS6 FRONT SHOCK ABSORBER BOTTOM-1
NW-26-LEY BS6 FRONT SHOCK ABSORBER BOTTOM-2
NW-26-LEY BS6 PALLAKKI BELLOW AIR SPRING
NW-26-LEY BS6 REAR SHOCKABSORBER PLATE
NW-26-LEY BS6 SOLENOID PTFC24V
NW-26-LEY BS4 COLLER BUSH
NW-26-LEY BS4 DOWTEE WASHER M26
NW-26-LEY BS4 FRONT SHOCK ABSORBER
NW-26-LEY MIDI BS4 BRACKET - SUSPENSION HOLDER
NW-26-LEY MIDI BS4 FRONT SHOCK ABSORBER ASSY
NW-26-LEY MIDI BS4 PULL ROD ASSY WITH BUSH
NW-26-LEY MIDI BS4 REAR SHOCK ABSORBER ASSY
NW-26-LEY MIDI BS4 BUSH - RUBBER-1
NW-26-LEY MIDI BS4 BUSH - RUBBER-2
NW-26-LEY MIDI BS4 STABLIZER HOLDER ASM
NW-26-LEY BS4 SHOCK ABSORBER
NW-26-LEY BS4 SHOCK ABSORBER FRONT 6.5T
NW-26-LEY SLF ALIEN BOLT - M16X2X130MM
NW-26-LEY SLF ANTI ROLL CUT BUSH REAR
NW-26-LEY SLF NUT - SUSPENTION BOLT
NW-26-LEY SLF NYLOC NUT - M24X1.5
NW-26-LEY SLF SHOCK ABSORBER-1
NW-26-LEY SLF SPHERILATIC BUSH WITH PIN
NW-26-LEY SLF SPIGOT
NW-26-LEY SLF SUSPENSION BOLT
NW-26-LEY SLF SUSPENSION BOLT (SPECIAL BOLT HALF THREADED)
NW-26-LEY SLF U BOLT M24X1.5X378MM
NW-26-LEY BS4 SPHERILASTIC BUSH
NW-26-LEY BS4 SUPPORT BRACKET LH
NW-26-M.BOLERO FRONT SHOCK ABSORBER
NW-26-M.BOLERO REAR SHOCK ABSORBER
NW-26-MACHINED WASHER MS - M16
NW-26-MACHINED WASHERS
NW-26-MACHINED WASHERS - M24
NW-26-MALE CONNECTOR
NW-26-MALE ELBOW M12X1.5MM
NW-26-NYLOCK NUT
NW-26-NYLOCK NUT - M16X2
NW-26-NYLON TUBE - 6MM
NW-26-NYLON TUBE - 8MM
NW-26-REAR AXLE SUB COMPOUND LINK TC
NW-26-RUBBER BUSH - SHOCK ABSORBER
NW-26-RUBBER CONNECTOR ASSLY
NW-26-RUBBER WASHER - BUMP STOP
NW-26-LEY SLF SHOCK ABSORBER-2
NW-26-SPLIT PIN 3/16 X 2 1/2
NW-26-SPRING WASHER - M16
NW-26-STEEL PISTON 12 INCH - DOUBLE HOLE
NW-26-STEEL PISTON 12 INCH - SINGLE HOLE
NW-26-TAPER SLEEVE
NW-26-TATA BS6 BUSH - FRONT ANTI ROLL BAR
NW-26-TATA BS6 BUSH - REAR ANTI ROLL BAR
NW-26-TATA BS6 BUSH/CUT BUSH SET - REAR ANTI ROLL BAR
NW-26-TATA BS6 SHOCK ABSORBER FRONT
NW-26-TATA SPHERILASTIC BUSH TAPER LPO 1616
NW-26-TATA/LEY CONNECTING ROD
NW-26-TATA/LEY TAPER PIVOT BOLT
NW-26-UD AIR SPRING (BELLOW) FRONT
NW-26-UD AIR SPRING (BELLOW) REAR
NW-26-UD ALTITUDE VALVE CONTROL ROD ASSEMBLY-1
NW-26-UD ALTITUDE VALVE CONTROL ROD ASSEMBLY-2
NW-26-UD ALTITUDE VALVE CONTROL ROD ASSEMBLY-3
NW-26-UD BUMPER BLOCK
NW-26-UD CLAMP (HANGING BUSH)
NW-26-UD CONNECTING PIN
NW-26-UD ECAS DISTANCE SENSOR
NW-26-UD FRONT AND REAR SHOCK ABSORBER
NW-26-UD BUSHING - FRONT ANTI ROLL BAR
NW-26-UD FRONT LINK ROD
NW-26-UD FRONT REACTION ROD
NW-26-UD BUSH (66MM) - FRONT REACTION ROD
NW-26-UD FRONT SHOCK ABSORBER ASSY
NW-26-UD LINK ROD - FRONT (U BAR)
NW-26-UD REACTION ROD
NW-26-UD REACTION ROD (FRONT V STAY)
NW-26-UD RUBBER SPRING - REAR ANTI-ROLL BAR
NW-26-UD REAR REACTION ROD
NW-26-UD BUSH (V BAR 85MM BUSH) - REAR REACTION ROD
NW-26-UD REAR REACTION ROD TOP (REAR V STAY)
NW-26-UD BUSH - REAR REACTION TOP ROD (75MM BUSH)
NW-26-UD RUBBER BUSHING
NW-26-UD SPECIAL NUT BOLT - ENGINE
NW-26-VOLVO AIR BELLOWS-1
NW-26-VOLVO AIR BELLOWS-2
NW-26-VOLVO AIR SPRING
NW-26-VOLVO AIR SPRING (FRONT BELLOW ASSY)
NW-26-VOLVO BELLOWS-1
NW-26-VOLVO BELLOWS-2
NW-26-VOLVO BELLOWS-3
NW-26-VOLVO BUMP STOP
NW-26-VOLVO GAS SPRING SIDE HATCH 700N
NW-26-VOLVO MOUNTING PLATE AIR SPRING UPPER
NW-26-VOLVO RUBBER BUSHING (SHOCK ABSORBER RUBBER BUSH)
NW-26-VOLVO SHOCK ABSORBER-1
NW-26-VOLVO SHOCK ABSORBER-2
NW-26-VOLVO SHOCK ABSORBER-3
NW-26-VOLVO SHOCK ABSORBER-4
NW-26-VOLVOV AIR BELLOWS
NW-26-WASHER 18 MM - SHOCK ABSORBER
NW-26-WASHER 22 MM - SHOCK ABSORBER
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender No_204Call-2_Tender Documents - 1.zip
Tender Document • 0.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .