ADDN / ALTN OF PARKING AREA TO BUILDING NO P-20 AND P-75, ADDN/ALTN TO EXISTING FENCING ALONG THE ROAD OF SAILORS MARRIED ACCOMODATION IN TRV AND PROVN OF PVC WALL CLADDING IN SHIP SUPPORT COMPLEX AT 2ND FLOOR UNDER GE HADDO, PORT BLAIR

Amount

Dismantling fencing wire mesh,any type all as specified and directed by Engineer-in-Charge.

Demolition of pre-cast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed

M&L precast cement concrete block masonry exc. 10 cm width with solid block C1 (1:3:6) (using 20 mm graded stone aggregate) and setting in cement mortar (1:6) all as specified and as directed.

M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfaces of walls finished even and smooth (without using extra cement) all as specified.

Dismantling structural steel work complete all as specified and directed by Engineer-in-Charge.

M&L for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc Fe-410-W Grade E-250 Quality A complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying 2 coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed.

M&L for 6mm thick X 150mm wide non-asbestos decorative planks (shera planks) fixed to steel members with suitable screws/fasteners/nuts and bolts & washers and applying two coats syenthetic enamel paints complete all as specified and directed. Make:- Shera Planks or Equivalent

M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard) complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard).

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping complete all as specified and directed.

Excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth in soft/loose soil for foundation, etc or for shafts, wells, cesspits, manholes, pierholes, etc n. exc 10 Sqm on plan and getting out complete all as specified and directed

Returning filling in incl spreading, levelling, watering and well ramming in layers n. exc. 25 m in soil complete all as specified and directed.

Removal excavated soil to a distance n. exc. 50m and deposited where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc. 15 cm thickness (belove or above ground level) specifically provided for etc complete all as specified and as directed.

Demolition of reinforced cement concrete (by mechanical pneumatic concrete breakers) of any description and in any position not otherwise specifically provided for.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons, riser of steps, skirting, dado etc laid in any mortar complete all as specified.

Excavation in post holes (or similar holes) each n.exc 0.5 Cum getting out and removing surplus soil to a distance n exc 50 m etc all as specified and as directed.

M&L for cement concrete Type C-2, 1:3:6 (using 40 mm graded stone aggregate) in post holes or in simillar works etc complete all as specified and directed

M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing complete. (Note : Colour of granite shall be as approved by Engr-In-Charge)

S&F rolled sections as in post built up of one beam / channel or angle section with flanged plates, caps bases slices angle brackets cleats and other connections, conforming to Fe 410-w.(Gde-E-250 ) quality-A complete all as specified and as directed.

S&F for Roof trusses (framed), trussed, purlins, and fastening and heavy brackets framing (beam, tee, angle, channel or flats section) including distance pieces, cleat etc conforming to Fe-410 (Gde-E250) quality -A complete all as specified and as directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-w (Gde-E-250) quality A complete all as specified and as directed.

S&F for mild steel plates (plain or chequired) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde E-250) Quality -A complete all as specified and as directed.

S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550 Mpa as in roof overing /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering, ridge, eves gutters etc fixed with self tapping screws complete all as specified and directed.

M&L for Aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering etc fixed with self tapping screws as specified.

S & F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-316 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location incl taking down old railing of any description complete all as specified and as directed.

M&L for Cement concrete P.C.C (1:4:8) Type D2 (using 40 mm graded aggregate) as in sub base 75 mm thick finished even and fair complete all as specified.

M&L for glossy finished heavy duty chequered cement concrete tiles 30cm x 30cm x 25mm thick, made of grey cement and pigments, machine pressed as in flooring, set, jointed and pointed in neat cement slurry laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, inishing and sweeping extra sand complete.

S&F 150mm bore PVC (SWR) pipes, Type 'B' Grade, single socketed, in any length pipes single socketed, in any length with rubber ring joints, laid in trenches/fixed to walls/placed in weep holes using synthetic rubber adhesive cement solvent complete all as specified and as directed.

S&F 150mm bore PVC (SWR) bends any radius using synthetic rubber adhesive cement solvent complete all as specified and as directed.

M & L for seamless false ceiling made out of 12mm thick of gypsum board fixed to the ceiling section with 25mm long self drilling and tapping screws having Philips head with under head cutter at 200mm centre to centre, including finishing the joints of face board with specially formulated joining compound and 48 mm wide fibre tape to provide seam less finish and including GI channel 0.55 mm thick with two unequal flanges of 20 to 30mm and web of 27 mm fixed to surrounding wall using nylon sleeve and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 215 mm each and web of 45 mm suspended from soffits at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.20mtr length) of 0.55 mm thick having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm long including thin layer of Pop with Gypsum binder, sanding the surfaces till smooth surface is obtained and finally applying two coats of acrylic emulsion over one coat primer over 3mm thick putty all as specified and as directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specified and directed by Engg-in-Charge.

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specified and directed by Engg-in-Charge.

S&F 5mm thick plain colour PVC sheet in strips & channels feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVC partitions inclusive of solvent cement and fixing at site complete all as specified and directed.

M&L aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0micron fixed over frame of aluminium tabular section 50x25mmx 2.0mm thick, having panels not exc 1200x1200mm with necessary silicon filling, in approved pattern as in column, beam, wall etc. complete as specified and as directed. Note : Necessary MS scaffolding required for work shall be deemed to be included in the quoted rate (Appx hight 10 Mtr from GL)

Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, light fittings, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed.

Taking down old Unserviceable fuse unit / DBs 415 Volt/ 230 volt including MCCB / MCBs complete all as directed by Engineer-in-Charge.

Taking down carefully old unserviceable light fittings only and removing from site complete all as specified and as directed.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 6A light / fan / SOCKET OUTLET/Bell point controlled by one, one way 6 Amps modular switch. MAKE of PVC : Modi/Precision/Supreme/Finolex/Polycab

ONE LIGHT/FAN point controlled by one, one way 6 Amps switch.

ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on independent board.

ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on same board with other switches.

M&L for Point wiring complete with 4 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 4 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps modular switch on independent board.

S&F modular switch, one way, one module, single pole, 6 Amps complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells

S&F modular switch, one way, one module, single pole, 16 Amps complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells

S&F modular socket outlet, multipurpose, 3 pin, 16 Amps, flush type controlled by one switch 230 volts AC circuit complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells

S&F modular socket outlet, multipurpose, 3 pin, 6 Amps, flush type controlled by one switch 230 volts AC circuit complete all as specified and as directed. Make : Roma(Anchor) / Legrand / Seimens / Havells

S&F AC starter switch of capacity 25 Amps working on 240 Volts, AC supply suitable for split type airconditioner complete all as specified and as directed. MAKE: CRAB TREE Cat part No. ACTO252504 or equivalent in ANCHOR/HAVELLS/L&T

M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body complete all as specified and as directed.

S&F ceiling fan of metallic body, white colour, 1200mm sweep, AC 230 volts, heavy duty with down rod and canopies complete all as specified and as directed. MAKE: CG Model No. Briz Air Deco or equivalent in Havells/ Usha/ Orient

Taking down carefully old unserviceable ceiling fan of 1200mm sweep deposit to MES Store yard under AGE E/M Haddo and S&F new ceiling fan of 1200mm sweep, 220V, 50Hz AC supply, metallic body 5 star rated including providing of twin core copper wire 23/0.0076 from ceiling fan to ceiling rose complete all as specified and as directed. Make : CG (Model No : Energion HS-5 Star or equivalent make of Havells/ Bajaj / Usha

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified. Make:Roma (Anchor)/Legrand/Simens/Havells

S&F of LED tube light fittings with 20 watts (Warm White/ White Colour as per requirement of site complete) light source in integral module with polycarbonate / Acrylic diffuser more than 85% efficiency of light with LED lamp efficacy as 110 Lum/W THD < 15% with operating voltage range 150-300V, 50Hz with driver efficiency > 85%, surge voltage withstand 2.5KV, Power factor > 0.9, energy efficient fitting surface mounted including connecting up with two/three core cable complete all as specified and directed. Make : Luker/ Havells/ Philips/ Crompton Note : Quoted rate is inclusive of any other misc materials required for fixing new fittings.

S&F recessed mounted 15 watts, LED ceiling light fitting, yellow/White colour, round / square shape (Warm white/ warm colour as per requirment of site complete) made from die-cast aluminium and CRCA covering, powder coated in white colour suitable for armstrong/ grid ceiling complete with separate electronic driver complete all as specified and directed. MAKE: PHILIPS (Model No. Astra Max Metal Panel) / CROMPTON GREAVES (Cat Part CDR-205-15-57-SL-NWH) or equivalent make of HAVELLS/Luker Note : The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting.

S&F of decorative ultra slim linear LED lighting fixture of 18 watts recess mounted 220V, 50Hz with extruded polycarbonate, alumnium heat sink, envirnmental friendly energy efficient fittings recess mounted round/square in shape (warm/white colour as per requirement of site complete) complete all as specified and directed. MAKE: PHILIPS Model No. Dura Slim or equivalent make of HAVELLS/CG

Supply, fixing and testing tube light fittings LED 20 watts 4 feet including all accessories and fixing arrangement for fixing the light fittings white / warm (yellow colour) as suitable at site complete all as specified and directed. Make : Philips Cat Part No. Astra Line / CG Cat Part No : CCS-100-20-65-HL2-DP-NWH/ or equivalent make in Philips / Havells

S&F recessed mounted 30 watts, LED ceiling light fitting, yellow/White colour, round / square shape (Warm white/ warm colour as per requirment of site complete) made from die-cast aluminium and CRCA covering, powder coated in white colour suitable for armstrong/ grid ceiling complete with separate electronic driver complete all as specified and directed. MAKE: PHILIPS (Cat Part No. RC380BLED30S-6500-G4L60W PSU OD) / CROMPTON GREAVES (Cat Part LCTLRNE-30-F0-WW) or equivalent make of HAVELLS/Luker Note : The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting.

S&F 25 watts LED building security light fittings with peanuts leans IR 65 luminaire comprise of eligantly designed COB LED ensure efficient optics and uniform distribution of light for street light application pressure die cast aluminium housing powder coated graphite grey and toughened glass of IP 65 with pranuts including necessary fixing arrangements as per site requirements complete all as specified and directed. Make : CG Cat Part No . LSTS-25-CD or C&S Cat Part No. LTESSE25WLED or equivalent make in Havells / Philips

S&F GI brackets of GI pipe light grade of size 25mm dia including nuts, bolts and washers for building security light complete all as specified and directed.

S&F SPN DB sheet metal enclosure double door suitable (IP-43) Protection, 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete. Make : Havells/L&T/Indo Asian/Legrand/Schneider

S&F SPN DB sheet metal enclosure double door suitable (IP-43) Protection, 10 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete. Make : Havells/L&T/Indo Asian/Legrand/Schneider

S&F MCB, SPN, "C" series, 240 volts, 40Amps, 10 KA rupturing capacity complete all as specified and as directed. Make : Havells/L&T/Indo Asian/Legrand/Schneider

S&F MCB, SP, "C" series, 240 volts, 6-32 Amps, 10 KA rupturing capacity complete all as specified and as directed. Make : Havells/L&T/Indo Asian/Legrand/Schneider

M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6.15mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 6.0 Sqm copper conductor, One run of 6.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

Taking down old unserviceable LT XLPE cable of any size and any capacity all as specified and as directed by Engineer-in-Charge.

M&L for LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 2 core, 10 Sqmm laid in trenches/floors/ducts or fixed on poles/walls with suitable clamps/saddles or drawn through pipes etc., including connecting up with suitable size of lugs, glands and jointing material and including taking down old u/s cable complete all as specified and as directed. Note: (i) Necessary test results like continuity test, megger tests shall be submitted to Engg-in-Charge before the cable is laid. (ii)Excavation earth work will be measured and paid separately Make : Gloster / Havells / Anchor / Polycab / Finolex.

M&L for LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 2 core, 16 Sqmm laid in trenches/floors/ducts or fixed on poles/walls with suitable clamps/saddles or drawn through pipes etc., including connecting up with suitable size of lugs, glands and jointing material and including taking down old u/s cable complete all as specified and as directed. Note: (i) Necessary test results like continuity test, megger tests shall be submitted to Engg-in-Charge before the cable is laid. (ii)Excavation earth work will be measured and paid separately Make : Gloster / Havells / Anchor / Polycab / Finolex.

M&L for HDPE DWC (Double wall corrugated) pipe of size 40mm (Outer diameter) x 32mm (Inner diameter) along with connected accessories like couplers, bends, end caps etc., laid in trenches/floors/ducts or fixed on poles/walls for as in protection of LT/ HT cable complete all as specified and as directed. Make : REX POLYEXTRUSION LTD/ Tirupati plastomatics Pvt Ltd

M&L for HDPE DWC (Double wall corrugated) pipe of size 50mm (Outer diameter) x 38mm (Inner diameter) along with connected accessories like couplers, bends, end caps etc., laid in trenches/floors/ducts or fixed on poles/walls for as in protection of LT/ HT cable complete all as specified and as directed. Make : REX POLYEXTRUSION LTD/ Tirupati plastomatics Pvt Ltd

S&F LED post top luminaire, outdoor type (Prince opera midi) of 240 Volts, 50Hz, 40 watt capacity, IP 65 protection including mounting on 60mm OD pipe galvanised medium grade pipe of 2.0 metre height from GL with necessary PCC (1:2:4) type B1 foundation and connecting up with and including 3 core 2.5 Sq mm multistranded copper conductor cable drawn through 25 mm dia rigid PVC conduit from one light to other (Approx distance between two posts 30 metres) including taking down old unserviceable one complete all as specified and as directed. MAKE:CROMPTON GREAVES Cat part No. LPTO-40-CDL-M or equivalent in PHILIPS/ C&S Cat Part No. LTGLC40WHPLED/W

S&F LED flood light fitting of high power LED, IP 66 protection, toughened glass, 70 Watts capacity, 220 V, 50Hz, pressure die-cast aluminium housing and Class I protection including necessary brackets of suitable size, bolts, nuts and washers as required fixing on high mast of 16 mtr of power factor >0.9 and connected by 3 core 2.5 Sqmm multistranded copper conductor of suitable length including taking down old unserviceable any type of light fitting complete all as specified and as directed. MAKE: PHILIPS Cart part No.BVP141 70 CW FG GR PSU or equivalent in CROMPTON GREAVES/ C&S/ LUKER

S&F FRP pole box of size 170x170x105mm consisting of 50 Amps, 4 pole connector - 1 No. and MCB, SP, 16 Amps, 10 KA - 1 No. with necessary clamps, bolts, nuts and washers including taking down old unserviceable one complete all as specified and as directed. MAKE of FRP Box: Hansel/ SINTEX Cat No. GS-JB-1414 MAKE of MCB: L&T/ HAVELLS/ LEGRAND

S&F LED street light fittings of high power LED, IP 66 protection and unique power lens to ensure uniform light distribution, higher spacing between poles and maintenance free system of LED of 70 Watts capacity, 220 V, 50 Hz including necessary brackets of suitable size, bolts, nuts and washers as required and including taking down old unserviceable halogen / any type of light fittings complete all as specified and as directed. MAKE: C&S Cat Part No. LTESSI70WLED / PHILIPS Cart part No.BRP409 LED CW 074 CW HE MR FG S1 PSU GR or equivalent model of CROMPTON GREAVES/ HAVELLS/ LUKER

M&L for street light mounting bracket made up of 32mm dia galvanised steel tubing, medium grade, 1.20 metres long, bent to shape with inner angle not less than 120°, with and including necessary fixing clamps fabricated out of angle iron/flat iron of suitable size, bolts, nuts and washers as required and applying two coats of aluminium paint over a coat of red oxide primer including taking down old u/s brackets complete all as specified and directed.

BHARAT MULTITECH INDUSTRIES PVT LTD

M/S JEELANI ELECTRICALS

T.M.RAMANATHAN AND SONS

Sree Tirumala Enterprises

ANITA VARMA ENTERPRISES

M/s Ramesh Lal

MAJUMDAR FURNITURE