WELCOME MAINT TO OFFRS MD/SINGLE LIVING ACCN, OFFRS MESSES/GUEST ROOMS INCLUDING CONNECTED REPAIR WORKS AT AOR OF AGE B/R-I UNDER GE (EAST) AGRA

Amount

Material and Labour for preparation of old plastered or unplastered surfaces of wall including cornices, pilaster etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply one coat of white wash complete as specified and directed.

Material and Labour for preparation of old plastered or unplastered surfaces of Ceiling including cornices, pilaster etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply one coat of white wash complete as specified and directed.

Material and Labour for preparation of old plastered or unplastered surfaces of wall and apply one coat of distemper oil emulsion white or any other colour complete as directed and specified.

Material and Labour for Complete removal of existing treatment of old distempered surfaces of wall including cornices, pilaster Etcby washing, rubbing down, scrapping and stopping hole etc and apply two coat of oil bound distemper over and incl 1 mm thick Birla/JK Wall care putty Complete all as specified and directed.

Material and Labour for Complete removal of existing treatment of old distempered surfaces of wall including cornices, pilaster Etcby washing, rubbing down, scrapping and stopping hole etc and apply one coat of oil bound distemper over and incl 1 mm thick Birla/JK Wall care putty Complete all as specified and directed.

Material and Labour preparation of old plastered or unplastered surfaces of wall including cornices, pilaster etc by brooming down or steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply one coat of cement base paint white or tinted complete as specified and directed.

M & L for complete removal of existing treatment of old plastered wall surfaces by scrapping and applying two coats of Exterior Emulsion weather proof paint over and including a layer of wall care putty (avg thickness 2 mm) complete all as specified and directed.

Material and Labour preparation of old painted wood & wood based surfaces of any description over 10 cm width or girth and apply one coat of synthetic enamel paint wood or tinted complete all as specified and directed.

Material and Labour preparation of old painted steel & steel based surfaces of any description over 10 cm width or girth and apply one coat of synthetic enamel paint on Steel surface complete as specified and directed.

Taking down of plaster from wall/ celing and soffits of chajja etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Taking up or down steel/CPVC/UPVC tubing and connections of walls, ceiling, floor etc of 15mm bore complete all as specified & directed.

Taking up or down steel/CPVC/UPVC tubing and connections of walls, ceiling, floor etc of 20mm bore complete all as specified & directed.

Demolition of un-reinforced cement concrete in any position and in any description including removing the same where directed complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillers etc complete all as specified & directed.

Dismantling of floor, hearth or wall tiles / terrazo/mozaic (floor,dado) including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises, all as specified and directed..

Taking down chowkhats with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) but exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

Taking down shutters of any description n. exc 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm each and n exc 2.00 sqm complete all as specified and directed.

Material & labour for cleaning the surface of existing concrete of ceiling and applying rust removal and Zinc hydro pimer over exposed surface then applying Fibre reinforced polymer modifier repair mortar as per Manufacturer instructions complete all as specified & directed with the following method of applications : - (a) Clean the surface and remove loose concrete, any dust, oil, paint, grease etc. (b) Expose fully any corroded steel in the repair area and remove all scale and corrosion deposits by applying rust removal chemical. (c) Exposed Reinforcement should be Applied with anti corrosive paint on corroded steel and binding the chicken wire mesh of having thickness not less than 0.7 mm and width of aperture (i.e hexagonal opening) not less than 25 mm having weight not less than 1 kg / sqm. (d) apply Zinc primer over clean re-bars and allow dry brfore continuing. (e) For a dry substrate, it should be primed by applying one coat of hydro primer. (f) Applying bonding agent to the old concrete and new concrete surfaces. (g) then applied a fibre reinforced polymer modified repair mortar and necessary curing as per manufacturer Instructions.

Material & labour 10mm thick rendering in CM 1:4 on fair faces of brick concrete surfaces finished even and fair complete all as specified and directed.

Material & labour for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces complete all as specified and directed.

Material & Labour for Preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material & labour for three coats of white wash on newly plastered surfaces of walls including preparation of surface complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including one coat of 1 mm JK/Birla wall care putty to match the existing as required, complete all as specified & directed.

Material & labour for preparation of old surfaces of ceiling and applying one coats of oil bound distemper over and including one coat of plaster of paris to match the existing as required complete all as specified & directed.

S&F in repairs 3 mm thick sheet glass, ordinary quality, frosted on one side for window/ventilators in square not exceeding 0.50sqm each pane complete all as specified & directed.

Supply & fixing 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply & fixing 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Cutting chases, pining in making good in CM 1:3 for concealed water tubing, cutting n.exc 10 cm complete all as specified and directed.

Supply & fixing in repairs PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply & fixing three layered rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including dismantling existing water tanks complete all as specified & directed.

Supply & fixing three layered rotational moulded polyethylene water storage tanks 1000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including dismantling existing water tanks complete all as specified & directed.

M & L for disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale dirt from bleaching powder etc from tanks of capacity Exc 500 liters but not exc 1000 ltr and from mouths of circulating ipes etc complete all as specified and directed.

M & L for disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale dirt from bleaching powder etc from tanks of capacity Exc 250 liters but not exc 500 ltr and from mouths of circulating ipes Etc complete all as specified and directed.

Supply & fixing in repair PVC connections of 450mm long of Make suitable for 15mm dia iron pipe incl PTMT nuts complete all as specified & directed.

S&F stop valve cast copper alloy high pressure fancy type chromium plated with long shank and cup (concealed type) 15mm dia as fixed in repair complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap including connection to trap and cistern and flush pipe (excl flusingh cistern ) and making good to disturbed surface of floor complete all as specified and directed.

S&F in repair of plastic seat cover for WC(E.T.) white incl CP or aluminium hinging device complete all as specified & directed.

Supplied and fixed in repair vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, waste coupling, complete all as specified & directed.

Supply and fixed in repair angular valve , 15mm dia, cast copper alloy, CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply & fixing in repair CP tubular towel rail, 60 cm long, 20mm bore, chromium plated complete all as specified and directed.

Supply & fixing in repair CP tubular towel rack, 60 cm long, 25cm width, chromium plated complete all as specified & directed.

Supply & fixing in repair CP tubular towel ring 20mm bore, chromium plated complete all as specified & directed.

Supply & fixing in repair C.P. grating 100/125 mm dia as reqd at site complete all as specified and directed.

Supply & fixing in repair C.P. grating 100/125 mm dia including one large hole for connection with waste pipe of WHB as reqd at site complete all as specified and directed.

S&F in repair C.P. Toilet paper holder complete all as specified and directed.

S&F in repair 20 mm dia Gunmetal, globe or gate valves, with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply & fixing in repair bib taps cast copper alloy chromium plated with long shank, crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, fixed in repairs complete all as specified & directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

Material & labour brick work in CM 1:6 with sub class B, brick & straigh or curved on plain exceeding 6m mean radius complete all as specified & directed.

Material & labour Non skid coloured Joint free tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

Material & labour glazed ceramic coloured tiles of size 450x300x8-10mm thick, as in skirting/dado set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 10mm thick cement screed bed of CM (1:4) complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 300x200x6-7mm thick, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 complete all as specified & directed.

M & L for Joint free double charged Vitrified tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) complete all as specified & directed.

M & L for joint free double charged Vitrified tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in wall and vertical surfaces such as skirting & Dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in wall including 10 mm thick cement screed bed of CM (1:4) complete all as specified and directed.

M&L for grinding and polishing of existing Kota stone or terrazo flooring up to required finishing complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for PCC layer over chajja / flooring complete all as specified and directed.

Material & labour for 40mm thick PCC floor(1:2:4) type B1, (using 20 mm graded stone aggregate) finished even and smooth with using extra cement complete all as specified and directed.

M& L for baroda green marble (of any type) work (table rubbed and polished) 18 to 20 mm thick in steps, cills, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) of thickness 10 mm and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of marble complete all as specified and as directed.

M& L for Machine cut kota stone slab 20-25 mm thick in steps, cills, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) of thickness 10 mm complete all as specified and as directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore heavy duty thick type suitable for wash hand basins/sinks complete all as specified & directed.

S&F in repair wall mixture cast copper alloy chromium plated screwed for 15mm dia pipe including connection with over head shower for hot and cold water PVC connection etc complete all as specified and directed.

Supply & fix in repairs CP Central hole basin/kitchen basin swan neck continental full turn type mixture with popup waste system with 450 mm long braided hoses screwed for 15 mm dia pipes including PVC connection etc complete all as specified and directed.

S&F in repair of 20 mm dia PTMT ball valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply & fix in repairs Vitreous China Squatting pan “ORISSA PATTERN” size- 580x440mm white with integral foot rest complete including provn of lime concrete bedding complete all as specified and directed.

Supply & fix in repairs sink with drain board made of stainless steel 0.80mm thick for kitchen with plug, washer and waste pipe including fixing cantilever brackets and connecting union to pipes overall size 915mmx420mm, bowl size 410mmx330mmx160mm complete all as specified and directed.

Supply & fix in repairs pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified and directed.

S&F (in repairs) PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls of 110mm bore with necessary fittings complete all as specified and directed.

Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore pipe etc complete all as specified and directed.

Supply & fix second class hard wood plain, solid, straight chowkats or frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified & directed.

Supply & fix Glazed or skeleton factory made door shutter, 35mm thick of second class hard wood (hollock), open rebated and prepared to receive glass, gauge ( without sash bars) with plain, chamfered or rounded, mitred beads for glass etc , size of members of shutters shall be as specified in SSR Part I, section -8 clause 8.24 (a) complete all as specified & directed.

Supply & fix in repair mild steel helical door spring 300 mm long with roller and roller plates complete all as specified & directed.

Supply & fix 30mm thick flush shutter solid core construction with block board and plywood face panels commercial type on both side complete all as specified and directed.

S & F Second class hardwood factory made door 35mm thick plain framed, panelled shutter (Two pane) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part I) klin seasoned and chemically pressure treated complete all as specified and directed.

S & F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F 30mm thick Second class hard wood factory made glazed and skeleton windows, ventilators etc are provided with stiles and rails shutters open rebated and prepared to receive glass, gauze etc (without sash bars ) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc complete sizes of members of shutters as specified in SSR Part-I section 8, clause 8.24 (b) complete all as specified and directed.

Supply & fix solid PVC door frame of size50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tales complete all as specified & directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10 cm width or girth, not otherwise described complete all as specified and directed.

S & F Butt hinges, medium weight, cold rolled mild steel, 75mm size complete all as specified and directed.

S & F Butt hinges, medium weight, cold rolled mild steel, 100mm size complete all as specified and directed.

S & F Extruded aluminium alloy handles fabricated type anodised 125mm size complete all as specified and directed.

S & F aluminium anodised of extruded section barrel tower bolt 100mm long complete all as specified and directed.

S & F Sheet glass 3mm thick ordinary quality and glazing with oil putty in suqares n exc 0.5 Sqm in each pane complete all as specified and directed.

M & L Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10Cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M&L Preparing new or previously untreated steel & iron surfaces of any description over 10Cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and directed.

Supply & fix galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S & F in repair mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed in steel frame/wooden and fixed with stainless wire staples complete all as specified and directed.

Material & Labour for external 2 nd class hardwood lipping 6 mm thick & 10 to 20 mm wide fixed with nails on block boards etc as in cupboard shelve kitchen cupboard etc complete all as specified and directed.

M& L for repair of High density moisture resistant fibre board of thickness 12 mm ,exterior grade, fixed to timber framework with screws as in cupboard shelves, kitchen, cupboards as in repair etc complete all as specified and directed.

Material & labour in repair for pre-laminated particle board 19mm thick, Exterior grade, pre-laminated one side with decorative choice laminations and other side balancing white laminations, fixed with nails/screws to timber frame work as in cupboard/shelves fixed complete all as specified and directed.

M & L for providing 6 mm thick plywood of grade BWR, type BB,fixed with screws to timber frame work or any other type of frame work complete all as specified and directed.

Supply & fix in repair floor door stopper of aluminium alloy body and tongue, anodized of lentgh 150 mm including rubber shoed fixed wooden or aluminium frame (door/shutter) complete all as specified & directed.

Supply & fix hasp and staple of size 75 mm long, safety type of aluminum anodized complete all as specified & directed.

Supply & fixing aluminium barrel Tower bolt of 150mm size etc complete all as specified and directed.

Supply & fixing Aluminium Sliding door bolts, plate type, 300 mm long complete all as specified & directed.

Supply & fixing in repair of 40mm dia Cup Board knobs fixed with nut, screws Each and washers of mild steel, brass polished complete all as specified and directed.

Supply and fix in repairs mild steel handle for steel window /ventilator complete all as specified and directed.

Supply and fix in repair steel peg stay for steel window/ ventilator complete all as specified and directed.

Material and labour for running welding in repairs, thickness of metal to be welded not exceeding 6mm complete all as specified and directed.

S&F 25 in repair mm dia Stainless steel of heavy duty fancy type of approved finish curtain rod incl. brackets and fancy type end knobs, rings etc complete all as specified.

S&F in repairs CP over head shower rose of dia n. exc 125 mm, fancy type with 450 mm SS heavy duty long arm and wall flange type complete all as specified and directed.

S & F in repairs hand shower (health faucet) with 1 meter long easy flex tube in chrome finish and wall hook complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm vide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repairs Flushing jet for pedestal pattern WC incl all fittings complete all as specified and directed.

S & F in repair of PVC cabinet mirror wall hung type complete all as specified and directed.

S&F in repair of bib cock with wall flange 15mm dia complete all as specified and directed.

S& F in repair stainless steel kitchen plate rack wall mounted of overall minimum size 750 x 600 mm and 250 mm deep, with partition for small/large plates etc made out of stainless steel gauge, fixed with rawl plug and CP steel screws complete all as specified and directed.

S& F in repair single piece EWC with UF seat cover hinges,fixing accessories set,cistern fittings,rim Less tornado flushing size 360 680x750 mm complete all as specified and directed.

M& L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the internal/external wall and wooden Cup board, shelves etc wooden area should drill by 6 mm bit, Gap between two holes is 30 cm to 45 cm internal/external wall skirting level should drill by 8/10/12 mm bit, gap between two holes is 45 cm to 60 cm filling the holes by 100 ml to 150 ml dilution of chemical emulsion in two stages 3 stage close the holes by white cement and finsihes with existing surfaces. The ATT chemical should be odorless and mixed formulation should be injected at the rate of 5 ltr per sqm. The ATT chemical should contains. (i) Byfinthrin 20 % EC(Smell Chemical). (ii) CHLORPYRIPHOS 20 % EC (Smell Chemical). (iii) Imidacloprid 30.5 % SC (Odor less Chemical). The work pertaining to ATT shall be executed from authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. (a) 02 years guarantee of painting work will be admissible after date of completion and 10% amount will be reserve against ATT work after date of completion for the 02 years.

S & F in repair of hat pegs,(six peg set) solid body of aluminium of size 125 mm complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F in repair of 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair door seal with stainless steel strip complete all as specified and directed.

M& L for applying smart care damp block 2 k of two component acrylic polymer modified cementitious high performance coating over existing surface including cleaning the existing surface and free from oil or loose material and applying the powder to liquid in 2:1 ratio and apply evenly over surface of walls complete all as specified and directed.

Supplied and fixed in repair set of 10 mm thick glass corner shelf set of 3 nos (size 200mm, 250mm & 300 mm) complete all as specified and directed.

Taking down copper/aluminium pooint wiring (light, fan, socket or power) complete, including fixture and fittings uch as switches, ceiling roses, pendants, regulators, sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above iems should be made as per conditions separately) and making good disturbed surfaces of wass, floors etc complete all as specified and directed.

Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLSH PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size MS Sunken Box with 3 mm thick hylam sheet/PVC box for mounting switches, regulator including FRLSH multi-strand PVC insulated unsheathed copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following : - (a) One light /fan point controlled by one switch.

All as per item No 123.00 above but for one 3 Pin 5 Amp switch Socket outlet point on an independent board.

All as per item No 123.00 here in before but one 3 Pin 5 Amp switch Socket outlet point on Same board with other switches.

All as per item No 123.00 here in before but with cable size FRLSH cable 4 Sq mm for one AC socket out let/ 15 Amps and multistrand insulated copper earth continuity conductor of size FRLSH cable 4 sqmm all as specified and directed

Supply and fixing in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp, complete all as specified and directed.

Supply and fixing in repair MCB TPN 40-63 Amp rating 415V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair MCB SPN 40-63 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F in repair LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W (4 feet 20 W) luminaire lumen >2000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification complete all as specified and directed.

S&F in repair LED batten Tube Light surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <10W (2 feet 10 W) luminaire lumen >1000 lm, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification complete all as specified and directed.

Supply and fixing in repair switch piano flush button single pole one way 5 amps 240 volts with polycarbonate body complete all as specified and directed.

Supply and fixing in repair Switch piano flush button single pole one way 15 amps 230 Volts with polycarbonate body complete all as specified and directed.

Supply and fixing in repair socket 5 amps 3 pin flush type, 240 volts with polycarbonate body complete all as specified and directed.

Supply and fixing in repair socket out let, 6 pin 5 and 15 amps multipurpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed.

S & F in repair stepped type electronic fan regulator socket/switch type ISI marked on the existing phenolic laminated sheet etc. as required, complete all as specified and directed.

Supply and fix in repair ceiling rose, polycarbonate, isolated body surface Bakelite 65mm dia three terminals all as specified and directed.

3Krishna Enterprises (BID ID -3126580)

Balaji Associate (BID ID -3125559)

SahaDevSingh Constructions (BID ID -3126446)

M/S RADHEY GOVIND ENTERPRISES (BID ID -3126608)

N.K. ENTERPRISES (BID ID -3127151)

aman construction & general suppliers (BID ID -3127256)

M/s Kok Singh Sisodia (BID ID -3126409)