SPL REPAIR TO CHITTORA JACKWELL AND ELECTRIC EQPT/ACCESSORIES UNDER GE SAUGOR

Amount

Dismantling of old unserviceable ACSR conductors from existing PCC/RCC/Steel poles complete all as specified and directed.

Dismantling of old unserviceable insulators any type & any size from pole (PCC/RCC/Steel) complete all as specified and directed.

Dismantling of Cross arms of MS channel or angle section etc complete all as specified and directed.

Dismantling stay assembly complete with stay wire complete all as specified and directed.

Disconnecting and taking out old existing unserviceable LT/HT under ground cable of any description and in any position from trenches/ under floor,roads,paths or from walls / from poles/ from ducts etc complete all as specified and directed.

Dismantling old unserviceable GI earth wire/guarding complete all as specified and directed.

Supply, laying and testing of XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade ,cross section area 10 Sqmm 4 core complete laid in trenches, ducts or fix to pipe, on walls, poles complete all as specified and directed.

Supply, laying and testing of XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade ,cross section area 10 Sqmm 2 core complete laid in trenches, ducts or fix to pipe, on walls, poles and connections to existing source with controlling switch complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation ,laying of cables/pipes/poles etc., and getting out in any type of soil complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and exc 1.50m but n.exc 3.0m depth for foundation ,laying of cables/pipes/poles etc., and getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding of 25 cm thick in any type of soil complete all as specified and directed.

Removal of surplus soil as obtained from excavation to a distance not exc. 50 Mtr and depositing where directed at a level not exc. 1.5 Mtr above the starting point complete all as specified and directed.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed. Note:-Punned thickness shall be measured for payment purpose.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm ' laid in trenches flat complete all as specified and directed.

Supply and fixing light grade GI tubing 40 mm dia with all fitting laid in trenches complete, including taking out old unserviceable pipe complete all as specified and directed.

Supply and fixing light grade GI tubing 50 mm dia with all fitting laid in trenches complete, including taking out old unserviceable pipe complete all as specified and directed.

Supply and Fixing street light Engineering plastic one piece moulding junction box with locking arrangment made out of HDPE and FI clamp 25 x 3mm complete of dimensions in CM +/-10%(34x28x13) with and including MCB SP 6 Amp 240 Volts complete with 04 Nos aluminium busbar or terminal four nos (3P-RYB and N) of rating 63 amps for single phase and neutral on porcelain based insulators and fixing clamps to pole for street lights complete, including taking out old unserviceable junction box complete all as specified and directed.

Dismantling old unserviceable concrete pole 9 metre long with foundation and Supply ,erecting and fixing the true vertical position,steel tubular swaged pole(410 SP-31),09 mtr long, complete with cast iron base plate,pole cap/final taper plug ,bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire lenght of pole ,including two coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be painted with one coat of red oxide primer and two coats of aluminium paint complete all as specified and directed. Note: (i) (Numbering of the poles shall be done with synthetic enameled paint and letter of shape & size as directed by engineer-in-charge. (ii) Cost of painting and numbering of pole shall be deemed to included in unit rate. (iii) Excavation, Earth work and PCC foundation will be measured and paid separately.

S&F GI bracket made out of GI pipe light grade of size 40/32 mm 1.2 m long cut to length bend to the required shape and 02 Nos mounting flat iron clamps size 40mm x 6mm, 04 Nos hexagonal bolts 10mm dia 100mm long with nuts and washers complete, including taking out old unserviceable brackets complete all as specified and directed.

Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including taking out old unserviceable light fitting complete all as specified and directed.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including taking out old unserviceable light fitting complete all as specified and directed.

Supply and fixing LED building security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including taking out old unserviceable light fitting complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation of PCC poles/struts/stay assembly etc, including necessary form work complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in foundation of stay assembly/pole etc including necessary form work complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for coping around poles, including necessary form work finishing even and smooth without using extra cement complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade weather proof PVC insulated aluminium conductor cable 1.5 Sqmm 3 core in service connections, including taking out old conductor cable complete all as specified and directed.

M & L for boring of holes by trenchesless technology using machine bore of 80mm dia (min) for inserting GI pipe 50mm dia bore at road crossing including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m for road/path crossing complete all as specified and directed. Note:- PCC work/GI pipe shall be measured and paid separately in respective item of this schedule.

Supply, fixing and testing cone LED Bollard light IP 65, 8 Watt of model Havells Cat Part No CONEBLS8WLED830PSYMTOPC or equivalent make as given in Appx 'C' complete, including taking out old unserviceable light fitting complete all as specified and directed.

Supply and fixing 40 watt,240 volts,5700 ANSI, decorative LED post top Lantern luminaire with diffuser and painted spun aluminium deflecter complete mounted on cast aluminium capsule type complete fix on suitable dia GI pipe with screw/nut complete, including taking out old unserviceable light fitting complete all as specified and directed.

Supply, fixing and testing Street light automatic Nature switch of capacity 5 KW single phase complete with using infrared sensor based NATURE SWITCH for automatic switching of street lights. Nature Switch operation should be based on Nautral Light Lux* level. Required illuminance level for switching ON is ≤ 30 Lux and for swiching OFF ≥ 10 Lux. The sensor should also have part night operation facility of min.4 hrs to max 12 hrs. The sensor along with suitable power contactor(s) and incoming-outgoing MCBs should be enclosed in a pole/wall/panel mountable Rust proof, Electric Shock Proof, Termite proof and FR grade thermoplastic polycarbonate Enclosure ( with Hinged LID) conforming to IP66 protection class 2. The circuit should also have provision for Manual Operation(i.e Sensor By-Pass option), including taking out old Street light timer complete all as specified and directed. Make - Kakatiya Energy system Model SWADEEP-66-5KW 1P or equivalent as given in Appx 'C'.

Taking out old earthing including connected accessories and M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mmx 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 32X6 mm GI earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead incased in and including 50 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg)duly reinforced with mild steel round bars 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handles with and including necessary excavation & earth work including laying the GI pipe concealed in floor /wall all as per plate No. 3 of SSR Part I complete all as specified and directed and testing on completion. Note : If the desired earth resistance is not found earthing shall be re-done by the Contractor at no extra cost to govt.

Taking out old earthing including connected accessories and M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mmx 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 25X4 mm GI earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead incased in and including 50 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg)duly reinforced with mild steel round bars 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handles with and including necessary excavation & earth work including laying the GI pipe concealed in floor /wall all as per plate No. 3 of SSR Part I complete all as specified and directed and testing on completion. Note : If the desired earth resistance is not found earthing shall be re-done by the Contractor at no extra cost to govt.

Supply, installation and testing in renewal Electromagnetic Flow Meter with transmitter (Remote Mounting) with following specification :- (a) Electromagnetic Flow meter full bore,flanged, diameter DN 350, 14 inches with flange pressure rating ANSI B16.5, class 150, flange material Carbon steel flanges ASTM A 105, corroison resistance coating of category C4, Liner material PTFE, Electrode Material Stainless steel AISI 316 Ti/1.4571, Transmitter MAG 5000, IP 67/NEMA 4 X/6, Polyamid enclosure, with display, 115-230 V AC, 50/60 Hz, meter cable glands, polyamid terminal box or MAG 600i integral mount complete all as specified and directed by Engr-in-charge. (b) Flow Transmitter 115-230 Volts, 4-20 mA output MAG 5000 0.4% +/- 1 mm/s, IP67 Protection,fibre glass reinforced polyamide enclosure material with display and remote mounting complete all as specified and directed by Engr-in-charge

Supply, installation and testing in renewal Electromagnetic Flow Meter with transmitter (Remote Mounting) with following specification :- (a) Electromagnetic Flow meter full bore,flanged, diameter DN 500, 20 inches with flange pressure rating EN1092-1 PN-16, flange material Carbon steel flanges ASTM A 105, corroison resistance coating of category C4, Liner material PTFE, Electrode Material Stainless steel AISI 316 Ti/1.4571, Transmitter MAG 5000, IP 67/NEMA 4 X/6, Polyamid enclosure, with display, 115-230 V AC, 50/60 Hz, meter cable glands, polyamid terminal box or MAG 600i integral mount complete all as specified and directed by Engr-in-charge. (b) Flow Transmitter 115-230 Volts, 4-20 mA output MAG 5000 0.4% +/- 1 mm/s, IP67 Protection,fibre glass reinforced polyamide enclosure material with display and remote mounting complete all as specified and directed by Engr-in-charge

Supply and fixing in renewal LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply and fixing in renewal New generation energy saving enviroment friendly long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting mount sturdy LED Bollard with high power LED as light source maximum illumination aspect in surrounding garden light 08 Watt, inbuilt driver, IP 65, 230 Volt, complete connection with PVC insulated multi stranded copper flexible wire twin core of suitable size from nearest source complete all as specified and directed.

M&L for renewal of construction of brick masonry valve pit chamber of size 1200x1200x1000 mm, with and including necessary earth work, PCC, copping, plastering on internal surface of valve pit, Framed work for the valve pit chamber cover made of MS sheet angle equal angle 40x40x5 mm and MS sheet 3 mm thick confirming to Fe410-o and Fe 310-o including welding cutting hinges locking arrangement complete and two coat of synthetic enamel paints over a coat of red oxide primer applied on the valve pit cover and frame all as per drawing and as specified and directed.

M&L for renewal of construction of brick masonry valve pit chamber of size 900x900x600 mm, with and including necessary earth work, PCC, copping, plastering on internal surface of valve pit, Framed work for the valve pit chamber cover made of MS sheet angle equal angle 40x40x5 mm and MS sheet 3 mm thick confirming to Fe410-o and Fe 310-o including welding cutting hinges locking arrangement complete and two coat of synthetic enamel paints over a coat of red oxide primer applied on the valve pit cover and frame all as per drawing and as specified and directed.

M&L for renewal of glow sign board of size (length not less than 3.00m and width not less than 0.90m) for E/M installation with computerised words printed on PVC board including fabrication of work, angle iron, electrical connection with suitable copper wire and LED fittings for independent letters complete all as specified and directed Note: Matter and size of letters shall be approved by Engr-in-Charge.

S&F pre- coated coloured galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa (AZ150) as in roof covering/ clading to wall, including crimping sheet at end fixed with self tapping screws, including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed.

S&F 0.5 mm thick galvalume sheet pre-coated coloured for ridge or fixing for closing gable truss suitable for profile pattern sheet fixed with self driving screws, including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets as ridge complete all as specified and directed.

S&F structural steel work as in tubular trusses including special shaped washer complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 complete, including dismantling old mild steel work of any description complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed.

Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil complete all as specified and directed

M/S SHIVA TRADERS (BID ID -3433350)

M/S JAINENDRA KUMAR JAIN (BID ID -3433622)

shubhanshu traders (BID ID -3433304)