Shifting, installation, and commissioning of pump set as well as laying, fitting and dismantling of different size pipeline with extension and shortening of delivery pipe as per requirement and other pumping relatedwork at Hingula ocp.

Amount

Item Description/ Heading

Installation of L.T. pump/Motor /Pontoon set after placing of L.T. pontoon inside mine sump water & suction , delivery fitting .

Installation of H.T. pump/Motor /Pontoon set after replacing of H.T. pontoon set inside mine sump & Jointing by Nut & Bolt .

Dismantling of HT pump body cover & rotating unit, fitting of same after repairing.

Dismasting of 8” dia MS pipe

Dismasting of 6” dia MS pipe

Dismasting of 4” dia MS pipe

Laying of 8” dia MS pipe

Laying of 6” dia MS pipe

Laying of 4” dia MS pipe

Loading and unloading of pipe from workshop site to mine & mines to workshop .

Transportation of 4”/6”/8” dia pipe from Central Store to HOCP

Shifting / extension of H.T. Pontoon inside mine sump by dismantling of delivery side jetting hose, S/ piece & fitting of same / extra pipe after shifting / Extension of pontoon

Shifting / extension of L.T. Pontoon inside mine sump by dismantling of delivery side jetting hose, S/ piece & fitting of same / extra pipe after shifting / Extension of pontoon .

Making of H.T. Pump/Motor set pontoon shed inside mine sump.

Making of L.T. Pump/Motor set pontoon shed inside mine sump.

Making of H.T. fencing

Making of L.T. fencing

Dismantling /Erection of HT/LT fencing

Making of Ladder for H.T. & L.T. Pontoon for pump maintenance / Operation.

Making of 6” Tee/ Bend

Making of 8” Tee/ Bend

Making of 10” Tee/ Bend

Belt conveyor picking cutting 4”/6”/8”/10”

Fitting /Dismantling of 10”/12” FV/NRV/SV

Fitting /Dismantling of 6”/8” FV/NRV/SV

Fitting /Dismantling of 4” FV/NRV/SV

Providing of MS Nuts & Blots – 5/8”x ½”

Matching of 8”/6” dia pipe line with another pipe line by gas cutting and welding etc. Completely.

Modification of base plate for different motor & pumps by gas cutting , welding & material fitting etc. completely.

Making of MS Short piece 4” dia

Making of MS Short piece 8” dia

Reducer making 12” dia to 10” dia

Reducer making 10” dia to 8” dia

Reducer making 8” dia to 6” dia

Reducer making 6” dia to 4” dia

Welding of 4” dia M.S. flange

Welding of 6” dia M.S. flange

Welding of 8” dia M.S. flange

Making of 12” dia Short piece pipe

MS pipe /HDPE pipe jointing 10”/12”

MS pipe /HDPE pipe dismantling 10”/12”

Repairing of 10"/ 8”/6”/4" dia pipe line by dismantling , cutting , welding & refitting etc.

Dismantling /fitting of 10"/8"/6" dia jetting hose near pump & pipe line

Making of MS 6” dia short piece

Making of Bend 12” dia

Making of Short piece 10” dia

Gas cutting like ( Angle cutting plate cutting , damage bearing cutting, heatig of pump shaft & other miscelleanous work inside workshop

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning thesoil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Making , Shiftig and erection of Water Tanker filling point

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

OMM SHANKAR TRANSPORT (BID ID -1144975)