GE (N) P/TOKEN- 57 OF 2020-2021 REPAIRS TO JOINERY, PLASTERING, FLOORING, PLUMBING, SANITARY FITTINGS AND MISC REPAIRS AT GHORPADI AREA, 641 EME BN, ADV HQ (SWAC) , LAISOR UNIT ETC IN THE AREA OF AGE B/R (EAST) UNDER GE (N) PUNE

Amount

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including taking down existing plaster with two coats of exterior acrylic emulsion paint over a coat of primer on new surface all as specified.

Material and labour for roughning of damaged irregular surface of old concrete by picking sweeping cleaning and washing with water and rendering on surface of chajjas, roof projections ceiling facia etc. 15mm thick in cement mortar (1:4) over cement slurry thick coat @ 3 Kg/Sqm making the surface even & fair followed by 5 mm thick rendering in CM 1:3 finished even and smooth without using extra cement including making of drip course as required including applying two coats of weather proof acrylic emulsion paint over a coat of primer complete all as specified and as directed. (Upto height of 15 Metres). Note: Rate for form work shall be deemed to be included in the rate quoted by the contractor

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applying two coats of exterior acrylic emulsion paint over a coat of primer for facia, chajja, and roof projection etc all as directed by Engr-in-Charge..

M&L Fly ash brick work using old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 including demolition of existing brick work all as spd.

M & L for Providing precast cement concrete, PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate), as in louvres and jallies, 25mm thick (measured solid), including all mouldings, set in CM 1:4 complete all as specified & directed.

M & L for Reinforced cement concrete (nominal mix) 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregates as in coping of walls, canopies, and in the shelves and the like complete all as specified & directed.

M & L for Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips all as specified & directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement , with two coats of exterior acrylic emulsion paint over a coat of primer on new surface all as specified.

M&L for Rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster with two coats of OBD of any tint over a coat of primer all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth protection, 75 mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete all as specified and directed

M&L for 40mm thick Cement concrete 1:2:4 type B-1(using 20mm graded stone aggregate) as in Floor, finished even and smooth without using extra cement, including demolition of existing cement concrete all as specified and directed..

Supply and fix glass dividing strip 3mm thick, 38mm wide and inserted in position to conform to design complete all as specified & directed.

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified.

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified.

M&L coloured Vitrified Double Charge tiles 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and demolition of existing tiles complete all as specified.

M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 and demolition of existing tiles complete, all as specified.

M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and demolition existing stone slab complete,complete. all as specified.

M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed

Material and labour for hand cut kota stone slab 20 to 25mm thick in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including screed bed 20mm thick in cement mortar (1:6), including rubbing and mirror polishing demolition existing stone slab complete all as specified and as directed.

Supply & Fixed rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made frome Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. Make: Sintex, Polycon, Rotex

Supply & Fixed rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made frome Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. Make: Sintex, Polycon, Rotex

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. Make: JINDAL, TATA, RAVINDRA

All as per Srl item No 22 here-in-before, but fixing only

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. Make: JINDAL, TATA, RAVINDRA

All as per Srl item No 24 here-in-before, but fixing only

M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement , complete including making good to floor all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) ETWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm all as specified.

S&F in repair Cabinet mirror plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified. Make : Prayag act No. 557 or of equivalent make as per Appx 'A' as approved by GE

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm all as specified.

S&F in replacement stainless steel plate rack of size 609mm X 609mm X 254 mm all as specified CAT PART NO:- P-310 of Pryag or of equivalent make as per Appx 'A' as approved by GE

S&F in replacement stainless steel plate rack of size 609mm X 762mm X 254 mm all as specified CAT PART NO:- P-330 of Pryag or of equivalent make as per Appx 'A' as approved by GE

S&F in replacement stainless steel plate rack of size 609mm X 914mm X 254 mm mm all as specified CAT PART NO:- P-336 of Pryag or of equivalent make as per Appx 'A' as approved by GE

S&F in replacement stainless steel plate rack of size 787mm X 914mm X 254 mm all as specified CAT PART NO:- P-348 of Pryag or of equivalent make as per Appx 'A' as approved by GE

Supply and fix in repair for hand shower, brass chromium plated (health faucet) of ABC body 1.0 metres long easy flexible tube in chrome finish and wall hook all as per Cat No. ALE-ESS-585 of make Jaquar or equivalent as approved by GE complete all as specified and as directed.

S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE

S & F in repair Brass Chromium plated towel rail all as specified and directed. Make: Johnson Delta series Cat part No: T1350C or of equivalent make as per Appx 'A' as approved by GE

S&F in repair Brass Chromium plated towel ring all as specified and directed. Make: Johnson Delta series Cat part No: T1351C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Make: Johnson VIVA series Cat part No: T4806 or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs Pillar taps Swan Neck quarter turn suitable for 15mm bore pipe fancy type brass CP screwed for iron pipe or brass ferrule complete all as specified. Make: Johnson Magna series Cat part No: T2804C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs Pillar tap quarter turn suitable for 15mm bore pipe fancy type brass CP screwed for iron pipe or brass ferrule complete all as specified. Make: Johnson VIVA series Cat part No: T4801C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Make: Johnson VIVA series Cat part No: T4805C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repirs wall mixer brass chromium plated quarter turn 2 in 1 with bend pipe with provision for over head shower with bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Johnson VIVA series Cat part No: T4821C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs angle cock with flange chromium plated cast copper alloy screwed down complete all as specified. Make: Johnson Eco Cat part No: T3910C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs Two Way (2 in 1) bib taps with wall flange quarter turn suitable for 15mm bore pipe fancy type brass CP, screwed for iron pipe or brass ferrule complete all as specified. Make: Johnson VIVA series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing with arm/ pipe all as specified. Make: Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE.

M&L PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, (as in sunken floor) with spout GI pipe 50 mm bore medium grade up to 600 mm long or as per site requirement including demolition of existing concrete all as specified.

S&F Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume complete all as per manufacturer,s instructions all as soecified and directed. Make: M/S Pidilite Industries Limited or equivalent of FOSROC, Super Aquacem (India) Ltd.

S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified.

S&F in repair grating round 75 mm size of stainless steel with/without hole all as specified.

S&F in repair grating round 100mm size of stainless steel with/without hole all as specified.

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified..

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified..

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified..

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified.

S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified..

S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified..

S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete all as specified..

S&F in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete all as specified..

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified..

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified..

Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding and roots, girth n. exc. 10cm each and applying chemical treatment with GLYPHOSATE 41% and making good of surface including removing /refixing of CI/GI pipe lines complete all as specified and as directed. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)

S&F in repair GI spout pipe medium grade 50mm bore of length 450mm set in PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) and making good the external portion with CM 1:3 with and including water proofing compound @ 200ML per bag complete all as specified .

M & L Textured heavy duty exterior tiles of size 300mmx300mmx10mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 15mm thick in CM (1:4) including demolition of existing tiles complete, all as specified. Make:- Johnson Endura textured design or equivalent of Kajaria/Somany).

S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed by Engineer-in-Charge.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed

All as per srl item No. 74 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and directed

Taking down shutters of any description not exc. 1 sq. m each complete all as specified and directed

All as per srl item No. 75 above but exc. 1 sq. m but n exc 2 sqm each complete all as specified and directed

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F factory Made Solid PVC Molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 19mm X 19mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 19mm to 20 mm thick. Door shall be provided with 10 mm thick Pvc lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm.

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

S & F Factory made fully glazed/wire gauge (single piece Both side) PVC prelam door shutter 29 to 30mm thick consisting of frame made up of MS tube of size 19mm X 19mm (19 guage) for top & bottom rail and in styles. Single piece plain coloured PVC sheets of 5mm thick to be used to cover style & rails. For edges, PVC sheets strip of 10mm thick struck inside with solvent cement. Plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert with PVC solid core board 19mm to 20mm thick. Panel shall be of wire gauge stainless steel wire cloth 0.36mm nominal dia of wire and everage width of aperture 1.40mm, stainless steel wire cloth shall be covered with aluminium XPM in rhombus shape in one piece from top to bottom rail, fixed with self tapping screw not less then 50mm long complete all as specified and directed by Engineer-in-Charge. Make: Rajshri/ Sintex/Duraplast/Accucell

S &F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples all as specified & directed.

S&F 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane including hacking out existing broken glass complete all as specified.

S&F Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

S&F in repair, 150mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified.

S&F Stainless steel Hasp and staple of 100 mm size including bolt to hinge plate fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F Continuous (piano) hinges, stainless steel, Width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed.

Material and labour for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and repairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved.

Material and labour for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. 3

M/s Akshay Contruction