Works Contract for Shifting of 1 no 100 KVA Distribution Transformer in ExgKPudur SSII 100 100KVA and 6 other works in AE OM KILPALLIPET section

Amount

Excavation and Erection of RCC, REC, PSC poles upto 8.00m length by using JCB/Manual with Base Plate.

Excavation and Erection of RCC, REC, PSC poles above 8.00m length by using JCB/Manual with base plate.

Excavation and Erection of stay set complete with fixing up stay wire Eye, Bow,Guy Shackle, Binding, Stay Plate etc.

Fixing of HT V Cross arms 3 1/2, 4 1/2 & 5 feet

Fixing of LT 3 Phase cross arm

Fixing of HT / LT TI Fitting

Fixing of 11 KV pin & Insulator

Fixing of 11KV Disc

Fixing of LT Pin & Insulator

Fixing of LT Shackle

Aluminum Knob

Paving and stringing of conductors of sizes above 7/2.59 mm ACSR or other equivalent conductor /AB Cable upto 7/3.35mm ACSR. (route length)

Paving and stringing of conductors of sizes 7/2.59 mm ACSR (route length)

Erection of Distribution transformer at structures above 25KVA to 100KVA

ERECTION of Single Pole TRANSFORMER STRUCTURE COMPLETE inclusive of following works - Excavation of pole pits sizing 2' X 2' X 6', erection of poles, erection of base plate, erection of structure materials , erection of 11 KV GOS and HG Fuse, Structure Earthing complete , Pole concreting (2' x 2' x 6') for both base and sleeve including supply of jelly, sand and cement by the contractor in the ratio of concreting 1:2:4 , plinth erection with plastering ratio 1:2 including supply of cement and sand , Fixing of Open Type fuse units, HT/LT LAS fixing and LAS earthing through PVC Pipe 0.5" , Provision of bus-bar arrangement, Erection of Stay Set complete, Jumpering, erection of support angles and insulators if any , Alteration of materials in lathe works if any, provision of danger board, 3 Nos Earth pipe including erection of cement collar and painting of pole with Distember (paint and earth bit collar to be supplied by contractor) (without centre support)

Transporting of all types of poles by bullock cart or other vehicle (for all size of poles including loading and unloading) for a lead upto 5KM

Transporting of Distribution Transformer / Line materials from Sub stores to office/ site upto 10KM distance by engaging 1 ton capacity Minidor(lorry)

Transporting of Distribution Transformer from stores to office/ site upto 10KM distance by engaging 1 ton capacity Minidor(lorry)

Loading/Unloading of DT upto 100KVA

Loading/Unloading of variouse size of REC, RCC,PSC Poles upto 8.0m length

Loading/Unloading of variouse size of REC, RCC,PSC Poles above 8.0m length

Loading/Unloading of line material

Manufacturing of earth pipe clamps for structure including drilling and welding of clamps.

Drilling of hole in channel only 3/4" & 1" per hole

Open type side arm stud, cutting, drilling holes

Alteration of clamp

Tree cutting

E.P.F. @13 % should be Entered by the Bidder

E.S.I. @3.25 % should be Entered by the Bidder

G.S.T. @18% should be Entered by the Bidder