REPLACEMENT OF OLD LIGHT FITTINGS WITH LED LIGHTS AT MAP MD ACCN, ............... POWER SUPPLY FOR BLDG NO 290, JCOS MESS AT APS CENTER KAMPTEE.

Amount

Taking down old/ unsv / vintage light fitting disconnecting cable complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good to disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 2 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

All as per item No 2 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 2 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

All as per item No 2 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm dia, medium grade, concealed in wall of size 2x 4.0 Sqmm with earth wire of 1x4.0 Sqmm complete all as specified and directed. Note:- Accessories for point/ sub main wiring like PVC junction box, bend, tee, elbow shall be of same make.

S&F ceiling rose, surface type, 2/3 terminal, 5 amps complete all as specified and directed.

S&F modular switch, one way, 6A, 1 module complete all as specified and directed.

S&F modular switch, one way, 16A, 1 module complete all as specified and directed.

S&F modular socket, 6A, 2/3 pin, combined 2 module complete all as specified and directed.

S&F modular socket, 6A/ 16A, 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular fan step regulator,120 watt, 2 module complete all as specified and directed.

S&F highly durable surface mounted 18/20 watts LED batten/ surface constructed of fire retardant engineering grade extruded aluminium body and decorative end cap complete with driver having lumen output 2000, 230V, 50Hz with heat sink housing, 100 Lumen/W, 6500K, 2KV surge protection including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- Wipro Cat No LL20-281-XXX-65-AL1 / CG Cat No LDL-20-CDL or equivalent in Philips/ Bajaj.

S&F highly durable surface mounted 9/11 watts LED batten/ surface constructed of fire retardant engineering grade extruded aluminium body and decorative end cap complete with driver having lumen output 1000, 230V, 50Hz with heat sink housing, 100 Lumen/W, 6500K, 2KV surge protection including 3 core 1.0 sqmm copper conductor cable for connection and accessories complete all as specified and directed. Make:- Wipro Cat No LL20-111-XXX-65-NE3 / CG Cat No LDL-10-CDL or equivalent in Philips/ Bajaj.

S&F LED building security light, 25W with 1800 lumen output with driver with rated voltage 240 V, 50Hz, including mounting GI (made out of 25mm dia light grade pipe, 0.8m bent to shape) including FI clamps, nut bolts etc complete all as specified and directed. Make:- CG Cat No TRP-400-25.57-SL-LM-NSR / Philips Cat No BRP 020 or equivalent in Wipro.

S&F building security light LED 45W with lumen O/P 1800, with driver with rated voltage 240 V, 50Hz, including mounting GI (made out of 25mm dia light grade pipe 0.8m bent to shape) including FI clamps, nut bolts etc complete all as specified and directed. Make:- CG Cat No LSTS-45-CDL or equivalent in Philips/ Luker.

S&F sheet metal enclosure, single pole & neutral for 240 volts, 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F MCCB TPN, 40 amps, 415 V, 50Hz, 16KA with enclosure connecting with incomer cable using suitable size lugs as required and connection to main DB using 10 sqmm X 4 FRLSH copper conductor cable complete all as specified and directed.

S&F MCB triple pole & neutral, 415 volt, 40 to 63 amps, 10 KA complete all as specified and directed.

S&F MCB single pole, 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F 63 amp MCCB TPN, 10 KA, 415V with all fixing accessories complete all as specified and directed.

S&F VTPN DB, 4 way with IP43, double door complete all as specified and directed.

S&F MCB single pole and neutral, 240 volt, 6 to 40 amps, 10 KA breaking capacity, 'C' series, complete all as specified and directed.

M&L for earthing complete with galvanized street earth plate electrode 600x 600x 6mm thick, buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanized earth lead wire 4.00mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 TYPE B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

S&F exhaust fan, single phase, 200/225mm sweep, metallic with bolts, nuts, washers and connected electrically complete all as specified and directed.

S&F ceiling fan along with hanging accessories, 250V, 50 Hz, 1200mm sweep, 5 sar rating complete all as specified and directed.

Excavation in trenches for laying of cables, poles and stay in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out complete all as specified and directed.

Returning filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated materials not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDEP) pipe for laying of electric cable of size 90mm outer diameter and 78mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDEP) pipe for laying of electric cable of size 63mm outer diameter and 51mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe, XLPE, insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area of 50 sq mm, 3.5 core including testing after laid and jointed complete all as specified and directed.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe, XLPE, insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area of 35 sq mm, 3.5 core including testing after laid and jointed complete all as specified and directed.

S&F galvanised iron tubing of 80mm dia, light grade with all fitting, laid under floor/ road crossing or in trenches or fixed to pole/ walls with clamps as required complete all as specified and directed.

S&F GI pipe medium grade, 40mm dia, ISI marked, laid in trenches/ road crossing including fittings (union, socket, elbow, tee, etc) complete all as specified and directed.

S&F GI pipe medium grade, 25mm dia, ISI marked, laid in trenches/ road crossing including fittings (union, socket, elbow, tee, etc) complete all as specified and directed.

S&F GI pipe medium grade, 15mm dia, ISI marked, laid in trenches/ road crossing including fittings (union, socket, elbow, tee, etc) complete all as specified and directed.

S&F gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 40mm bore including taking down / removing old unserviceable valve complete all as specified and directed.

S&F gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed to 25mm bore including taking down / removing old unserviceable valve complete all as specified and directed.

S&F 15mm dia ball valves high pressure, with polythene float and flynut complete, screwed for iron pipe and fixed complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.66,000.00]

Paragon Electrotechnics

Sharma Electrical and Services

Chinmaya Enteprises

MVN Enterprises

VIJ ASSOCIATES

Bidder Name

Sharma Electrical and Services

Paragon Electrotechnics

Chinmaya Enteprises

Vaidehi E Link

MVN Enterprises

VIJ ASSOCIATES