TP1-072/2019-20

Amount

Soil investigation with 15m depth bore dirilled in the control room area & Design of structures/foundations using STAAD software or equivalent based on the soil test report and as per the requirement, including, preparation of Drawings for all the components of the proposed construction and submission of drawings 6 copies+2 soft copies of AutoCAD drawing, after getting approval from the competent authority, including cost of all materials, labour, leads, lifts T&P etc complete.

Filling in low lying area for levelling the surface including cost of cutting the gravelly soil /soft disintegrated rock with JCB / other machineris , consolidation as per specification & with power roller including all labour lead and lift etc complete.

Earth work excavation for foundation including all labour charges including initial lead, lift, etc. complete.

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the building using BIFLEX-C termite 250ml for 10lit of water etc. complete.

Supplying and filling river sand for foundation and basement including watering and consolidation in15 cm layers including cost of sand all labour lead lift etc. complete

Plain cement concrete 1:3:6, using 20 mm HBG metal for foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete.

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, for columns including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. ( excluding cost of steel reinforcement. For column concrete.) Upto Ground floor roof.

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, for columns including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. ( excluding cost of steel reinforcement. For column concrete.) First floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, for columns including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. ( excluding cost of steel reinforcement. For column concrete.) Second floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, for columns including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. ( excluding cost of steel reinforcement). For Raft concrete.

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, for Grade beams,plinth beams including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Retaining wall, cable duct side walls and cover slabs etc.,

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, for Lintels including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Continuous lintel concrete. Ground floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, for Lintels including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Continuous lintel concrete. First floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, for Lintels including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Continuous lintel concrete. second floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, Shunshade including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. but excluding cost of steel reinforcement. For Sunshade concrete 60cm projected, 80mm Tk. at wall and 50mm Tk. at free end. Ground floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, Shunshade including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. but excluding cost of steel reinforcement. For Sunshade concrete 60cm projected, 80mm Tk. at wall and 50mm Tk. at free end. First floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, Shunshade including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. but excluding cost of steel reinforcement. For Sunshade concrete 60cm projected, 80mm Tk. at wall and 50mm Tk. at free end. second floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, Roof beams including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof Beam concrete. Ground floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, Roof beams including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof Beam concrete. First floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, Roof beams including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof Beam concrete. second floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, for 130mm thick slab including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 130mm Tk. Ground floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, for 130mm thick slab including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 130mm Tk. First floor

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, for 130mm thick slab including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 130mm Tk. second floor

RCC 1:1 ½ :3 mix, using 12 to 20mm HBG machine crushed metal, for cable duct cover slab with form work including cost of cement, all materials labour, curing, all leads & lifts, vibrating charges, including cost of centering, shutting, as per standard specification, etc., complete. for precast slab (but excluding cost of steel reinforcement)

Plain cement concrete 1:2:4 using 12 to 20mm HBG machine crushed metal without form work including cost of all materials, cement, all labour, lead, lift, etc. complete. sump

PCC 1:3:6 mix using 12-20mm graded hard machine broken granite stone 100mm thick , flooring including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. For Floor concrete.

Providing steel reinforcement for RCC works including cost of steel rod binding wire and placing in postion of the steel reinforcement all materials, lead and lift etc., complete.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour lead lift etc ., complete. super structure, including cost of all materials, all labour charges, lead, lift, etc. complete. Ground floor

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour lead lift etc ., complete. super structure, including cost of all materials, all labour charges, lead, lift, etc. complete. First floor

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour lead lift etc ., complete. super structure, including cost of all materials, all labour charges, lead, lift, etc. complete. second floor

Brick work in CM 1:3 using II class chamber burnt bricks for partition wall, including cost of all materials, all labour charges, lead, lift, etc. complete.

Plastering with cm 1:5, 12mm thick for walls including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Plastering with cm 1:3, 12mm thick for ceiling, beams, sunshade,plinth etc. including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Providing cooling tiles laid with PCC 1:3:6 including cost of all materials labour, lead and lift etc., complete.

Damp proof course using cement mortar 1:3, 20mm thick with water proofing compound including cost of all materials lead lift etc., complete.

Painting two coats with approved quantity White distember over a water base primer as priming coat, for interior ceiling and surfaces including cleaning the plastered surface, cost of all materials, labour, lead, lift, T&P, etc. complete.

Painting the inside walls with two coats of best quality interior emulsion of approved colour over a interior primer coat of all materials, etc., complete.

Painting the outside walls with two coats of exterior emulsion over a primer coat of approved colour and quality including cost of all matreials, lead and lift etc., complete.

Painting with 2 coats acid proof paint of approved colour over a priming coat of white cement for battery room including cost of all materials, labour, lead, lift etc complete for interior walls.

Colour washing with two coat of colour cement over over one coat of cement primer for exterior surface including cost of all materials, labour lead, lift brush etc., complete.

Flooring with approved acid proof tiles over cement mortor 1:3 20mm thick in floor including pointing with white cement finishing the joints flush pointing the surface etc complete.

Flooring with approved ceramic non-slippery tiles of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete

Flooring with approved virtified of non slippery type tiles over cement mortor 1:3 20mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete( sample to be approved by Dept.Engineer)

Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface, including cost of all materials, labour, lead, lift, etc. complete.

Supply and fixing in position of double leaf anodised aluminium glazed main door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M with std.quality hydraulic floor spring, automatic door closure, rubber beedings, hinges, handle, etc., with 5.50mm thick sun cool glass, etc., complete. Double leaf main door

Supply and fixing in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5.50mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door

Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete. .

Supply and fixing in position of UPVC Windows of size 1.2mx1.5m as per ISS 1038-1958 (1245 ISS)using window frame bottom two track sliding with glazing clips rubber gaskets ,sliding wheel & 5.5 mm thick sun cool glass panelling including cost of all materials ,locking arrangements ,labour,lead,lifts etc complete.

Supply and fixing of UPVC Ventilator of 0.75m x0.45 m fully glazed lover type as per standard specification with approved section for frame and glass 4mm thick including cost of all materials ,lead,lift ,labour etc complete.

Fabrication, supplying and fixing of MS framed single leaf with GI sheet 18 gauge door using MS angle 40x40x6mm for door frame and MS angle 35x35x5mm for shutter frame with necessary stiffeners using MS flats of size 19x5mm including painting with two coats of enamal paint over one coat of red oxide paint including cost of all materilas, labour, lead, lift etc, complete.

Fabrication, supplying and fixing of MS angle framed window half glazed and half shutter using MS angle of size 35x35x5 mm for window frame and 25x25x5mm for shutter and MS flats 19x4 mm thick for window grill with locking arrangement including painting with two coats of enamal paint over one coat of red oxide paint including cost of all materilas, labour, lead, lift etc, complete.

Supplying and fixing MS grills for windows, ventilators, gates MS angle .Flat and square rods as directed by the Engineer at site including painting two coats with enamel paint over a coat of primer cost of materials, labour, lead and lift etc., complete.

Supplying and fixing of Europian type water closet with flushing cistern of Neycer/Parry ware with P"" or "S" trap ,seat cover 15 mm dia connectin hose .2 nos 15 mm dia CP angle valve ,hand shower -1 No. including cost of all materials ,lead lift etc complete as directed by department Engineer at site

Supplying and fixing in position IWC ORIYA PAN of size 580X420mm white glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc. complete.

Supplying and fixing in position White glazed Flat back urinal - Size 455 x 350mm of approved make and quality [Parryware -Aquaseal urinal or equivalent] and with PVC pipe connection [Kohinoor], 32mm PVC waste pipe [Kohinoor], 12/15mm GM wheel valve ISI, fixing the urinal to the valve with necessary TW plugs, brass screws etc, connecting to the water main as directed at site including the cost of all materials abour, lead, lift, T&P etc. complete.

Supply and fixing of wash basin of size 560x410mm white and of approved quality and make[Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basin in the wall with GI/Alu. brackets and rag bolt and nut, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete.

Supplying and fixing of 110mm dia, best quality ventilating shaft 3.65m height with PVC cowl at top and fixing in poistion inlcuding cost of all materials, curing labour, leads and lits etc., complete.

Supplying and fixing in position 110 mm dia PVC soil pipe- 6kg/sq.cm [Finolex or equivalent] with special clamps & PVC shoe at bottom including the cost of all materials, labour, lead, lift, T&P, etc., complete

Supplying and filling with 40mm HBG metal in dispersion trench, rain water harvesting pit including cost of metal, all labour, lead,lift, consolidation etc. complete.

Supply and fixing 110mm PVC down fall pipe 6kg/cm2 avonplast or Finolex make with required bend, tee and GI wall clamp at 90cm intervals including cost of materials, labour, lead and lift etc., complete.

Supplying and fixing in position of gun metal wheel valve leader make of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site. 50 MM dia

Supplying and fixing in position of gun metal wheel valve leader make of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site. 40 MM dia

Supplying and fixing in position of gun metal wheel valve leader make of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site. 32 MM dia

Supplying and fixing in position of gun metal wheel valve leader make of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site. 25 MM dia

Supplying and fixing in position of gun metal wheel valve leader make of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site. 20 MM dia

Providing and fixing of long body chromium plated heavy duty metal tap of 12mm size including cost of all materials, labour, etc., complete.

Supplying and fixing in position aluminium partition partly glazed & partly paneled above 12mm thick both side prelaminated boards [ MDF exterior grade] and 5mm thick machine frosted float glass 9modi, saint gobine or Equivalent0 using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizantals[4Nos] including cost of all materials, labour, lead, liftT&P etc. complete.

Providing inspection chamber with manhole cover depth varying from 0.75 to 1.5m including cost of all materails lead lift etc complete. M.H with CI Cover 0.6x 0.6

Fabrication & erection of Name Board of vinyal sticker laminated in alco panel using 18 gauge M.S. sheet with outer in suitable angle and stiffener at the rear side of MS flat supported on M.S. channel ISMC height from the G.L. and 1m.

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick (gareware or equivalent )including the cost of all materials, labour, lead, lift, T&P, etc. Complete.

Providing false ceiling by using 12.50mm thick perfonated gypsum board in panels using 6mmGI rod suspender ,16 gauge aluminium "T" and "L" including all materials, labour, lead and lift etc., complete.

Supplying and sticking the name / designation stickers in doors identifying the rooms including cost of material, labour etc. complete.

Providing locking arrangements with 6 lever Godrej lock with 3 keys including cost of all materials, labour, lead and lift etc., complete.

Supplying and fixing in position of ready made SINTEX PVC water tank 1000 litre capacity, Sintex or equivalent make including cost of cover, with opening for inlet, outlet & over flow pipe, Transporting and cost of all materials, labour, lead, lift, etc. Complet

Supplying and fixing in position of Stainless steel grade 302 , hand rail of 75mm pipe to height of 1000 mm and support of 25mm above square / round including cost of all materials, labour, lead, lift, T&P etc. complete.

Providing MS channels and chequred plates of 8mm thick inside the control room including cost of all mateiral,labour, lead, lift painting etc., complete

Supplying and fixing black granite stone 0.90 x 0.60 m size Engraved Foundation detail and year of construction fixing in wall at entrance, Digital wall clock 2 Nos, floor coir mat 2000x600 for Entrance 1000x500 - 2 No. for office of approved make and quality including the cost of all materials, leads, lifts etc., complete

Painting the name of Substation over entance wing wall in both Tamil and English using colouring with enamel paints etc., including cost of all material, labour, lead, lift etc., complete

Drilling of borewell in various soil /hard rock etc., including transportation of Power drill machineries first by taking a pilot bore of 180 mm dia and then drilling 150 mm dia at the bore well point fixed at site.( 0-200m)

Drilling of borewell in various soil /hard rock etc., including transportation of Power drill machineries first by taking a pilot bore of 180 mm dia and then drilling 150 mm dia at the bore well point fixed at site. -(200-350m )

Supplying and providing Heavy duty 180 mm PVC casing pipe with ISI

Supplying &Inserting 40mm dia HDPE hose pipe of make FLOWTEC or equivalent ISI make for suction inside the borewell with supporting clamp including cost of all materials, labour, lead & lift etc., complete as driected by the department engineer at site.

Supplying & Inserting 20mm dia HDPE hose pipe of FLOWTEC or equivalent ISI make for air pipe inside the borwell with supporting clamp including all materials, labour, lead & lift etc., complete as directed by the department engineer at site.

Supplying providing and fixing of 15 mm Dia GI pipe " B " class

Supplying and fixing of 180 mm dia PVC End cap approved best quality

Fixing of bore well point by well qualified geologist labour T & P including all lead lift etc complete as directed by the department engineer at site.

Supplying and erection of 5 HP air compresser 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper rod and 6' long 40mm dia GI pipe for earting and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete and placing motor over bed, labour charge for placing motor over bed including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.

Supplying and erection of 2HP mono block 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper wire rod and 6' long 40mm dia GI pipe for earthing and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with placing motor over bed, labour charge for placing motor over bed including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed multistrand Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (For Electronic Regulator) (SD 23)

Supply and run of 2x 1.5 sq.mm (22/0.3) PVC insulated SC unheathed cu.conductor of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. (SD 43)

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall ,with 150x100x113mm Tw switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.(SD38)

Wiring with 2 x 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 mm x 100 mm x 113 mm Steel switch box with 3 mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion, with suitable colour for concealed power plug point. (SD 40)

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work PWD earthing (SD 173)

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only. (SD 163)

Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. (SD 60)

Supply and fixing of single flu. fitting complete with LED light with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with flu. tube. 4' X 20w Single Industrial type fitting SD 92

Supply and fixing of single flu. fitting complete with LED light with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with flu. tube. 4'x20 W Single Box type fitting SD - 89

Supply and fixing of 4'x20 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with LED light with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes. (SD 91)

Supply and fixing of W.T bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for LED lamp with guard and 1No 20 W LED bulb. SD - 85

Supplying and fixing of 2 x 36 W LED Street light fittings crompton make (SFE 1624 HSBN) including cost of all materials, labour, lead, lift etc., complete, as per standard specification.

Supply and fixing of fancy glass shade and 18 W LED for BH point. - 79

Supply and fixing of 1200 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. (SD 107)

Supplying and fixing of 1200mm sweep AC ceiling fan with electronic requlator with 300mm down rod on the existing clamps of approved quality of Crompton/Rally/ usha/bajaj including cost of all materials lead lift etc complete.

Supply and fixing of 375 mm (15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall. -SD-116

Supply and fixing of 450 mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall. SD-118

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make , 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make). (SD 179)

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work. (SD 234)

Supplying and installation of 5 star rated inverter split Air Conditioner (3 phase -2 Ton capacity) of approved make (O General/Carrier/ Voltas or equivalent) with all accessories including stabilizer with reputed make including cost of all materials, leads, lift, fixing charges, etc., complete as per standared specification complete.

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make]. (SD 134-B)

Supplying and laying of 4 core 16 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work,with earth connections. (SD 176)

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.

Supplying and laying 25 mm dia 10 kg PVC pipe of approved quality for AC unit water drain pipe including cost of all materials, lead, lift, labour charge, etc., complete.

Drilling 4½" dia hole in brick wall and fixing suitable size PVC pipe in wall for providing cables for out door condencing unit including cost of all materials, lead, lift, labour charge, etc., complete. 100 mm dia

Drilling 4½" dia hole in brick wall and fixing suitable size PVC pipe in wall for providing cables for out door condencing unit including cost of all materials, lead, lift, labour charge, etc., complete. 50 mm dia

Supplying and fixing 5/8" copper tube for connecting AC panel to AC out door unit including cost of all materials, lead, lift, labour charge, etc., complete.

Laying fixing if Controflex (slicagel) compound in around ventilator for protection of rain water.

Supplying and fixing of 100mm dia. stoneware pipe with open joint and covered with pan tiles including all cost of materails lead lift etc complete.

Supplying and fixing in position of best quality mirror (22" x 16") with aluminium frame over wash basin including cost of all materials labour, lead, lift, etc. complete as directed by the engineer at site

Supplying and fixing of approved quality of aluminium towel rod with powder coating of size (2 ft) and fixing the same over teak wood round block and soap tray (PVC) in bath room including cost of all materials lead lift labour etc complete as directed by department Engineer at site

Supplying and fixing of PVC shower and Nickle control valve complete

Supply & fixing marble partition of 25 mm thick 600 mm wide and 1200 mm high including necessary cement mortar with white cement concrete for urinals as directed by department Engineer at site

Supplying, Fixing of buzzers with 5A bell push switch etc complete.

Providing opening for cable,Exhaust fan AC duct, water pipe line etc in brick work/RCC in building and retaining wall& cble duct including cost of machinaries labour etc complete. Brick wall

Providing opening for cable,Exhaust fan AC duct, water pipe line etc in brick work/RCC in building and retaining wall& cble duct including cost of machinaries labour etc complete. RCC concrete

Painting with two coats of approved enamel paint over one coat of primer for all M.S door window, gater etc. including cost of all materilas,labour ,lead and lift etc. complete.

Providing projected border 20 Cm width in CM 1 : 3. 20 mm thick including cost of all materials, labour, lead, lift, etc., complete.

Providing projected border 7.5 Cm width in CM 1 : 3. 20 mm thick including cost of all materials, labour, lead, lift, etc., complete.

Supply and fixing of multi way PVC floor trap 100 x 75 mm as directed by the Engineer at site cost of all materials, labour, lead, lift, etc., complete.

Suuply and fixing double side polished 38 mm thick cuddappa slab for cub boards including cost of all materials, labour, lead, lift, etc., complete.

Providing Decorative terracoata tiles over the sun shade slabs / portico etc., and painting two coats including cost of all materials, labour,lead, lift, etc., complete.

Manufacturing, supplying and fixing in position of RCC jally of 5 Cm thick in Cement concrete 1:2:4 using 20 mm machine crushed stone jelly (Excluding cost of reinforcement steel) including cost of mould, finishing , curing, lifting, fixing in position et

Supplying and laying in position of ceramic channel of 150mm wide for drain of best quality and approved make complying with standard specifications and as directed by the engineer at site including the cost of all materials labour, lead, lift, T&P etc. complete.

Providing sealant materials in the expansion joint in the terrace floor up to a depth of 52mm, cleaning the edges properly to remove dust, stain, oil etc, finishing the edgs with polimer modified mortar viz. mixture of cement, sand with water & poly propylene with water proofing compound, applying Epoxy adhesive on the grooves of 1000 series products & also on the concrete surface, compress & install 'REACT 1000 - A01-044' of vexcolt/ Uk or equivalent for 40mm width in the expansion joint, finishing the system flush with to existing surface, including the cost of all materials, lead, lift, T&P, etc. complete.

Forming expansion joints in roof slab with 18 gauge GI sheets as per 2B plan W.No 2/41 revised TNBP specification.

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer. Teak wood console desk

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer. "S" Type chair (Local rate)

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer. Three drawer steel table

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer. Steel side rack open type 4 self

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer. Steel half bench

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer. Revolving Chair

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer. Operator Table 6'x5'

Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. sample to be approved by department Engineer. PVC Chair of reputed make

Plastic bucket wit Jug (20 Ltr capacity)

Plastic bucket wit Jug (10 Ltr capacity)

Mirror ( 2' x 1½')

Towel rod

Digital wall clock

First Aid box set

Wall clock 2'0'' dia

Dismantling of RCC concrete including cost of all labour, lead,lift,and away from the site. etc. complete.

Dismantling of existing brick wall including cost of all labour, lead,lift,and away from the site. etc. complete.

Clearing Jungles including cost of all labour, lead,lift and away from the site. etc. complete.

Turfing in slope including cost of sand, gravel mix in 1:1 for a depth of 0.15 m and red earth, sand and cow dung mix in 1:1:1 for a depth of 0.15 m and pitching of Korean grass including cost of all materials, watering, lead, lift, labour and T & P, etc., complete.

Providing 300mm dia flower pots containg green plants as directed by the engineer

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)