Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹36.2 L
EMD Value
₹72,350
Closing Date
21 Oct 2026, 5:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER, MI DIVISION, KODERMA
Construction of Check Dam on Gangamo Nala Under Jainagar Block
2026_WRD_119826_1
WRD/MID/KODERMA/F2-05/2026-27 (2nd Call)
Open Tender
Civil Works
Percentage
335 days
KODERMA
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
₹72,350
12 Oct 2026
12 Oct 2026
23 Oct 2026
12 Oct 2026
21 Oct 2026
12 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Clearing grass and Removal of Rubbish up to a distance of 50m outside the periphery of the area by manual means
common part A 2.02 | 0.08 | Ha. | 19,760.3 | ₹1,580.82 |
| 2 | Earth work in excavation of foundation trenches in ordinary soil (Vide classification of soil item-A) and disposal of excavated earth so obtained (50M. away from the edge of the trenches) with initial lead of 150M and initial lift of 1.5M as per specification and direction of E/I.
WRD 6.1.8 | 1,885.56 | M3 | 177.76 | ₹3,35,177.15 |
| 3 | Earth work in excavation of foundation trenches as per design section in ordinary or soft rock where blasting not required (Vide classification of soil item-C) and disposal of excavated materials so obtained (50M. away from the edge of the trenches) with initial lead of 150M and initial lift of 1.5m as per specification and direction of E/I. (where blasting is not required).
WRD 6.1.11.2 | 83.89 | M3 | 570.29 | ₹47,841.63 |
| 4 | Providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level.
BCD 5.3.1.2 | 189.46 | M3 | 4,598.23 | ₹8,71,180.66 |
| 5 | Providing randam rubble stone masonry in CM (1:4) in foundation and plinth with hammer dressed stone of less than 0.03 M3 in volume and clean coarse sand of F.M. 2 to 2.5 including cost of screening raking out joints to 20 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.
BCD 5.2.28, Common 4.28 | 137.21 | M3 | 2,739.68 | ₹3,75,911.49 |
| 6 | Providing randam rubble stone masonry in CM (1:4) in superstructureincluding cost of screening of materials scaffolding raking out joints to 20 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.
BCD 5.2.31 ,Common 4.31 | 194.56 | M3 | 2,906.96 | ₹5,65,578.14 |
| 7 | Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size), excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.
BCD 5.3.9.1 | 34.15 | M3 | 5,218 | ₹1,78,194.7 |
| 8 | Providing shuttering including strutting proping etc. and its removal afte use in foundation as per specification and direction of E/I.
WRD 6.3.20 | 59.6 | M2 | 418.03 | ₹24,914.59 |
| 9 | Providing 25mm. thick cement plaster (1:4) with clean coarse sand of F.M. 1.5.including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per bullding specification and direction of E/I.
Common part A 3.12 | 150.16 | M2 | 258.87 | ₹38,871.92 |
| 10 | Providing Tor steel reinforcement of 8 mm dia. rods as per approved design and drawing with cuitting, bending and binding with annealed wire with cost of the wire removal of rust, placing the rods in position ( including carriage of bars to work site ) all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel steels Ltd. Bokaro and Vizag (RINL).
BCD 5.5.4 | 1.81 | MT | 83,314.02 | ₹1,50,798.38 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
BOQ_162132.xls
BOQ • 0.39 MB
TENDER_DOCUMENTS.pdf
Tender Documents • 1.49 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .