Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹7.4 L
EMD Value
₹18,425
Closing Date
25 Jan 2024, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
D N Sridhar
REPAIR OF MLA OFFICE BUILDING IN KALASA TALUK
PWD/2023-24/BD/WORK_INDENT7594
PWD/2023-24/BD/WORK_INDENT7594
Open
Buildings
Electronic Documents, First(One Cover)
PWD Division Office Chikkamagaluru
8 documents required · 8 mandatory
₹500
₹18,425
18 Jan 2024
18 Jan 2024
24 Jan 2024
REPAIR OF MLA OFFICE BUILDING IN KALASA TALUK
Construction of Embankment by excavating the available approved Gravel/
Murrum deposited at a place or borrow pits during or prior excavation with all
lifts and lead, transportation to site, spreading...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Dismantling old plaster or skirting raking out joints and cleaning the
surface for plaster including disposal of rubbish to the dumping ground
to the appropriate disposal area as per direction of Engi...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3
coarse sand) finished with a floating coat of neat cement to brick masonry
including rounding off corners wherever required smooth re...
Providing 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished
with a top layer 6 mm thick cement plaster with cement mor...
Finishing with Deluxe Multi surface paint system for interiors and exteriors
using Primer as per manufacturers specifications: Two coats applied on
walls @ 1.25 L/10 m² over and including one coat of...
Finishing walls with Acrylic Smooth exterior paint of required shade : Old
work (Two coat applied @ 1.67 l/ 10 m²) on existing cement paint surface
including preparing the surface after thoroughly cl...
Providing and laying vitrified floor tiles with thickness 9-10 mm in
different sizes with water absorption less than 0.08% and conforming to
IS: 15622, of approved make, in all colours and shades, lai...
Providing and laying vitrified floor tiles with thickness 9-10 mm in
different sizes with water absorption less than 0.08% and conforming to
IS: 15622, of approved make, in all colours and shades, lai...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness
to be specified by the manufacturer), of 1st quality conforming to
IS : 15622, of approved make, in all colours, shades, e...
Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3
coarse sand) finished with a floating coat of neat cement to brick masonry
including rounding off corners wherever required smooth re...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:
15622 (thickness to be specified by the manufacturer), of approved make,
in all colours, shades except burgundy, bottle gre...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved
make and colour using acid and/or alkali resisting mortar bedding
for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing in position 12mm thick plaster of paris (Gypsum
anhydrous) for ceiling reinforced with hessian cloth flat surface with
ceiling tiles up to a height of 5 m above floor level over a...
Brass curtain rod 20 mm dia 1.25 mm thick ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges...
Providing and fixing Steel work in built up tubular (round, square or
rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,
fixing in position and applying a priming coat of approv...
Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with EPDM rubber / neoprene gasket
etc. complete as per the architectural drawings and the directions of...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to openi...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi
chambered UPVC (Matching to RAL-9016) sections and with minimum
TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing in position fully panelled Matti/Nandi wood shutters
for doors with , stiles and rails of 30mm. thick with bottom and lock rails
180mm wide top rail and stiles 100mm wide as per d...
Providing Salwood frames of doors, windows, clerestory windows,
ventilators and other frames, wrought, framed or assembled including
making plaster groves (excluding cost of cement concrete and side c...
Providing and fixing flush door shutter made out of solid core block board
type, well seasoned , chemicaly treated hard wood battens and internal
frame with minimum 45 mm wide wooden frame alround doo...
Providing & fixing factory made PVC Door frame of size 50x47mm with
a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled
Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and
15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of
fittings and brackets, cutting and making good the w...
Providing and fixing one piece construction white vitreous china squatting
plate with an integral longitudinal flushing pipe, white P.V.C. automatic
flushing cistern, with fittings, standard size G.I....
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of standard pattern, including painting of
fittings and brackets, cutting and making good the w...
Providing and fixing water closet squatting pan (Indian type W.C. pan )
with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing mirror of superior glass (of approved quality) and
of required shape and size with plastic moulded frame of approved make
and shade with 6 mm thick hard board backing :Rectangular...
Providing and fixing PTMT towel rail complete with brackets fixed to
wooden cleats with CP brass screws with concealed fittings arrangement
of approved quality and colour.600 mm long towel rail with t...
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm
high and 112 mm distance from wall of standard shape with bracket of
the same materials with snap fittings of approved quality and c...
Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.32 mm dia ---- Including cost and conveyance of all materials, labour, hire charges of machinerie...
Providing and fixing C.P. brass bib cock of approved quality conforming
to IS:8931 ---- Including cost and conveyance of all materials, labour, hire charges of machineries and equipments with all lead...
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch)
suitable for bore well confirming to IS 8034-2000 specifications, to work
site with testing as per instructions of engineer incharge...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW-1 7594.doc
Tender Document • 1.03 MB
GST DECLARATION CERTIFICATE.docx
Others - GST DECLARATION CERTIFICATE • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .