Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.9 Cr
EMD Value
₹3.7 L
Closing Date
18 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SR DEN E
28 conditions · 12 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB(Placed at Page No.35 of tender form and document attached), along with copies of Audited Balance Sheets and Profit and Loss statement duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
For details refer attached documents
(a)The tenderer must have successfully completed or substantially completed (For more details refer attached documents), any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. (For more details refer attached documents).
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate
Similar Nature of Wok - Any type of civil work viz building and structureswork, pipelines underground and overhead tanks, foundation treatmentworks in any Railway embankment/cutting, any earthwork, cover overplatform, bore wells, level crossing works including lifting barriers,cement concrete apron works, etc.
For details refer attached documents
Maintenance period is 6 months
Tenderer shall submit the Notarized Copy of partnership deed of presentconstitution of firm & also photo copy of prior partnership deed ( if thereis change in constitution of firm) pertaining to the period for which thedocument in support of technical & financial eligibility criteria attached.If the participating firm is with different name and style, then Photo Copyof partnership deed / Sole proprietorship affidavit ( as applicable) of thefirms whose credential are being submitted by the tenderer in support oftheir offer shall also be attached. If Participating firm is a companyregistered under Companies Act 1956, then copies of Memorandum ofassociation & Article of association shall be attached. Power of attorneyin favour of the authorized signatory (along with copy of Boardresolution, in case of company) shall also be attached .
Clause No. 4(i) of Functional Specification for Rubberized Surface atLevel Crossings of RDSO: -The firm shall be manufacturer/supplier ofRubberised or Polymer based panels to be used for surfacing at levelcrossings. This firm will be called system provider. Clause No. 4(ii) ofFunctional Specification for Rubberized Surface at Level Crossings ofRDSO:-The system provider located abroad can supply through itsauthorised representative firm /licence firm located in India. For thispurpose, exclusive "Agreement" or "Memorandum of Understanding"should be executed by the system provider with the authorizedrepresentatives/licence firm located in India
Clause No. 4(iii) of Functional Specification for Rubberized Surface atLevel Crossings of RDSO: - The system provider should offer the panelsof proven technology and working satisfactorily on Indian / other Worldrailway system at level crossing gates. Certificates of having provenrecord for a minimum 05 years issued by the concerned Railway systemshall be furnished.
Clause No. 4(iv) of Functional Specification for Rubberized Surface atLevel Crossings of RDSO: - The system provider (OEM) shall possesssound technical credentials along with necessary infrastructure viz.Qualified manpower, machinery etc. for undertaking execution of work ofsurfacing at level crossings on Indian Railways for the quality finishedwork. Moreover the OEM will provide proper training to the Indian/othercountries personnel for installation and maintenance purposes.
Clause No. 4(v) of Functional Specification for Rubberized Surface atLevel Crossings of RDSO: - The system provider shall submitperformance report from any railways whether Government /Private orboth in support of fulfilment of above mentioned criteria as perAnnexure-I along with tender offer. The rail gauge/cant can vary in theforeign countries performance. The performance of the material will beaccessed purely on the basis of the parameters given in Para 3(b) i to vii.The report shall include details on maintenance frequency, looseningissues, and service life under heavy traffic
Clause No. 4(vi) of Functional Specification for Rubberized Surface atLevel Crossings of RDSO: - The system provider shall submit detailedspecifications with test results of the proven product. Same provenproduct has to be supplied. Test results shall include material tests fordurability with reference ranges
Clause No. 4(vii) of Functional Specification for Rubberized Surface atLevel Crossings of RDSO: - Design shall be as per relevant codes ofpractice such as BIS, EN, IRS, IRC, ASTM and UIC with latestrevision/edition). If for any item/work, above mentioned codes are notrelevant, best available Engineering practice / International codes shallbe mentioned. Add specific codes for rubber testing (e.g., ASTM D2000for classification, D573 for accelerated ageing).
Clause 9 of RDSO Functional Specification for Rubberised Surface atLevel Crossing - ANNUAL MAINTENANCE CONTRACT (AMC)- The firmshould be able to tie up for Annual Maintenance Contract (AMC) for aperiod of minimum 60 months beyond the warranty period of 60 monthsfor the level crossing surface. AMC to include periodic tightening,lubrication, and replacement of worn parts. Inspection of Level crossingonce in a year OR assisting the railways during overhauling of levelcrossings, whichever is earlier.
Clause 7 of RDSO Functional Specification for Rubberised Surface atLevel Crossing - WARRANTY i. The warranty shall be of 60 months andshall be applicable from the date of laying and commissioning of thesurface in level crossing. Warranty to include on-site inspections once ina year and free replacement of loosened/damaged parts. ii. Failure ofany part of the surfacing system to perform satisfactorily, or its provingunsatisfactory in service due to defective design, material, orworkmanship during the warranty period, shall be rectified byreplacement by the manufacturer/supplier at his own expense. Supplierto provide a skilled team for repairs within 48 hours of notification.
Clause No. 4(viii) of Functional Specification for Rubberized Surface atLevel Crossings of RDSO: - The service provider after getting orders forinstallation of rubberized surface at level crossing has to visit the siteand take measurements and prepare drawings as per site requirements,method statement for installation and get it approved by the Engineer incharge before installation.
20 conditions · 9 needing a document upload
Self Declaration by Contractor on Letterhead - The bidder shallupload,along with the offer, a declaration on the firm's letterhead,duly signedand stamped by the authorised signatory, confirmingthat:•TheContractor shall prepare and submit all drawings, designdetails, methodstatements, execution plans, programmes,calculations and otherdocuments required under the contract andshall obtain the approval ofthe competent Railway authority beforecommencement of the relevantwork/activity.•Qualified Engineer(s),Architect(s), Structural/otherConsultant(s) and competentsupervisory personnel, wherever required,shall be deployedthroughout the execution of the work in accordancewith the tenderconditions.•All mandatory registers, quality records, sitedocuments,inspection records and test reports prescribed in thetender/contractshall be maintained and kept up to date throughout thecurrency ofthe contract.•The Contractor shall establish a sitelaboratorywherever specified in the tender or directed by the EngineerinCharge and shall conduct all mandatory quality tests, includingslumptests, cube tests, material tests and other tests prescribed undertherelevant IS Codes, Railway specifications and instructions oftheEngineer-in-Charge.•The Contractor shall provideadequatemachinery, qualified manpower, safety equipment andPersonalProtective Equipment (PPE) commensurate with the nature,quantityand programme of work.•The Contractor shall have available atsite,or shall arrange to make available as and when required, thesmallconstruction equipment/machinery listed in Annexure-I, asapplicableto the scope of work. Documentary evidence of ownership,lease/hirearrangement or other lawful availability shall be furnishedwhenevercalled for by the Engineer-in-Charge.
Declaration of Site Visit - The bidder shall upload the Declaration ofSiteVisit in the format prescribed as Annexure-F of the tenderdocument,along with the bid. The declaration shall not relieve thebidder/Contractorof any obligation arising from the tender conditions,site conditions orapplicable contract provisions.
Mandatory submission of qualifications, credentials andtechnicaldocuments - The bidder/contractor shall upload the certificatesofqualifications, degree diploma, credentials and othertechnicaldocuments required under the tender along with the bid.Allcertificates shall be issued by recognised universities, institutionsorstatutory/competent authorities, as applicable, and shall beverifiable.The following minimum arrangements shall be providedwhereverapplicable to the scope of work:
The Railway Administration may verify the submitted qualificationsandcredentials from the concerned University/Institution/issuingauthoritybefore award of the work. No change in the approvedEngineer(s) shall bemade without prior written approval of theTender Accepting Authority orthe concerned Sr.DEN, as applicable.Any replacement shall be with aperson possessing equivalent orhigher qualifications and experience,unless otherwise approved.
Qualified Engineer(s) holding a recognised Degree/Diploma in theCivilengineering discipline shall be deployed for technicalsupervision,maintenance of prescribed registers and records, qualitycontrol,inspection and testing. Site material tests, including slump test,cubetest and other specified tests, shall be carried out in accordancewiththe applicable IS Codes, Railway specifications and the directionsofthe Engineer-in-Charge
The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents.
The Bank Guarantee bond shall be as per Annexure- VIA (Placed at Page No. 35-36 of tender form), and shall be valid for a period of 90days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: (i).A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. (ii).The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. .(i.e. excluding the last date of submission of bids) (iii).Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. (iv).The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. (v).The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected (vi).The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. (vii).The envelope shall be addressed to the officer and address as mentioned in the tender document. (viii).If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderer should mandatory submit documentary proof as per the attached checklist document.
Tenderers are abiding by the General Conditions of Contract (GCC) April 2022 & any statutory modification thereof and also abide to carry out the work accordingly.
Documentary proof - Tenderer should submit scanned copy documentary proof in regard for fulfilling the Technical /financial eligibility criteria along-with their offer (for details refer attached documents). If the tenderers do not submit any proof of meeting with the eligibility criteria as laid down in the tender conditions, the offer shall be considered as incomplete and shall be summarily rejected. Documents submitted in support of eligibility criteria after opening of tender will not be considered.
Document attached - Tender form
DIVA - ROHA :-Provision of rubberized road surface for level crossing gates between DW- PNVL & PNVL-ROHA sections. LC gate No. 1, 1E, 6 in DW-PNVL section & LC gate no. 5,11,13 in PNVL-ROHA section [IRPSM ID: 01.02.29.25.3.51.002]
CR-DRMWBB-2026-57-04~CR
CR-DRMWBB-2026-57-04
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹3.7 L
12 Nov 2026
12 Nov 2026
4 Dec 2026
5 items across 1 schedule · ₹21,47,355 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| emulsion pressure cleaning | — | — | — | — | |
| 1 | On bituminous surface @ 0.25kg/sqm | Sqm | 5100 | 9.2 | 46,920 |
| and 1.12 mm size kg of and 11.2 with with road coat | hot hot to | — | — | — | |
| 2 | and then per kg | Sqm of | 5100 | 281 | 14,33,100 |
| 3 | surface fitted with of grade of stone sieve and surface, roller | of Sqm all | 5100 | 130.85 | 6,67,335 |
| Schedule total | ₹21,47,355 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
2GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
8AnnexureVA.pdf
ATTACHMENT
9AnnexureVIB.pdf
ATTACHMENT
GCCACS1to6.pdf
ATTACHMENT
ACSNo.9toGCCApril2022.pdf
ATTACHMENT
ACS10toGCC2022.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
ACS-12-GCC-2022new_1.pdf
ATTACHMENT
GCCACS1to10.pdf
ATTACHMENT
AdditionalSpecialconditionfortender.pdf
ATTACHMENT
AnnexureFDeclarationforsitevisitnew.pdf
ATTACHMENT
ApprovalforspecialconditionstobeaddedinNITnew.pdf
ATTACHMENT
Auditparasubsectioning.pdf
ATTACHMENT
ChecklistfordocumentforCivilandtrackworksnew.pdf
ATTACHMENT
CivilWorksSpecialCondition_1_.pdf
ATTACHMENT
ContractorEngineerAdditionalSpecialCondition.pdf
ATTACHMENT
Deployment_of_contractors_engineer_at_site_250825_12442311.pdf
ATTACHMENT
specialconditionabove1crore.pdf
ATTACHMENT
splconditionworksiteselectricterritorytrack.pdf
ATTACHMENT
TrainingofContractorsSiteSupervisor30.07.26new.pdf
ATTACHMENT
NewTenderformApril2022asperCorrectionSlip.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .