Interception Diversion work in respect of Swerage Schemes to Dalhousie Town under SBM 2.0 Distt. Chamba HP Providing Laying Jointing Testing of D.I Pipe along with Cont. of Manhole chamber in various leftout area under Dalhousie Town and Wet well

Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, blasting work in soft / hard rock, chiselling in soft / hard including wedging out of a rock where blasting is prohibited and stacking the excavated earth up to all lifts, stacking the excavated soil up to all lead clear from the edge of excavation and then returning the stacked soil in 15 centimeters layers when required in to plinths, sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per direction and to the entire satisfation of Engineer- in- charge up to leads and lifts.

Providing and laying cement conrete 1 : 3 :6 . ( 1 cement : 3 sand and : 6 grade stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth upto all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying cement concrete 1:4:8(1:cement :4 sand:8 graded stone aggregate 40 mm nominal sixe) and curing complete excluding cost of form work in foundation and plinth including carriage of material with in all leads and lifts, as per direction and entire satisfaction of the Engineer-in-Charge.

Providing and laying cement concrete 1:2:4( 1 cement:2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work in foundation and plinth involving all leads and lifts as per the direction of Engineer-in-charge.

Providing and laying cement concrete 1 : 1½ : 3 mix. ( 1 cement : 1½ : sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinfocement for reinforced concrete work in Foundation footings bases of columns and the like; and mass concreteas per direction and to the entire satisfaction of Engineer-in-Charge.

Walls any thickness but not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundation upto floor within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge.

Suspended floor,roofs,landing and shelves and their support Balconies, Beams, girders,bressumers , contilevers upto floor two level within all leads and lifts as per the direction and entire satisfaction of Engineer-in-Charge.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in :- In flat surfaces with steel plates such as soffits of suspended floors, roofs, landing and the like floor etc upto all thickness in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Edges of slabs and wall breaks in floors and walls under 20cm wide within all leads & lifts.

Providing tor steel (reinforcement for RCC work) including bending,binding and placing in position complete in all respect including all leads and lifts as per the direction and entire satisfaction of Engineer-in-Charge.

Second class Bricks, brick work using common burnt clay building bricks in super structure in cement mortar 1:4 ( 1cement:4 sand) within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

White washing with lime on undecorated wall surfaces( two coats) to give an even shade i/c throughly brooming the surface to remove all dust dirt & other foreign matter as per direction of Engineer-in-charge

Providing & Fixing MS Grating within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing & Fixing MS ISMB 200 within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing & Fixing Exhaust Fan within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing & Fixing Pannel Door (Aluminium) i/c frame etc. complete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing & Fixing Non Clog submersible pumps of required HP as per the curve chart & site conditions. The Pumping machinery include Automatic Control Pannel, man MCB, voltmeter, Amp. meter, Power capacitor, Control MCB, supply & moter side cable/NRV/ Sluice valve / comman header job/Earthing and all other required components requirement as per related IS code (latest edition & CPHEEO Mannual)Providing Installation & Commissioning Non clog submersible pump with motor 1.0 HP each (3 No. set) with suitable application for Intermittent pumping station cap. 20KLD for Lohali complete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing Installation & Commissioning Automatic control pannel main MCB, voltmeter, Amp meter, Power capacitor, Control MCB, supply & moter side cable/NRV/ Sluice valve / comman header job/Earthing and all other required components requirement as per related IS code (latest edition & CPHEEO Mannual) for Intermittent pumping station, cap. 20KLD for Lohali complete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing Installation & Commissioning of Non clog submersible pump with motor 3 Set. (1 No.= 3.0 HP, 1 No.= 1.5HP & 1 No= 7.50 HP) with suitable application Intermittent pumping station cap. 222KLD Near Sonam Guest House complete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing Installation & Commissioning Automatic control pannel main MCB, voltmeter, Amp meter, Power capacitor, Control MCB, supply & moter side cable/NRV/ Sluice valve / comman header job/Earthing and all other required components requirement as per related IS code (latest edition & CPHEEO Mannual) Near Sonam Guest House complete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing & Fixing screen size bar (10x50mm) i/c all respect and as per direction of the Engineer in Charge.

Providing & Fixing oxidised MS sliding door bolt 250 x 16mm within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing & Fixing MS Cleats with nuts to rest a pintless within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Apply cement slurry on RCC slab or cement concrete work complete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing & Fixing CI Rungs complete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Steel work welded in Built up section, Trusses & frame work i/c cutting hoisting fixing in position & applying a priming coat of red lead paint in grating frame, guards, Ladder railing bracket & similar work with in all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge.

Providing & Fixing precast SFRC Manhole cover having size of 560mm internal dia (Medium Duty) within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Manufacturing & Supplying of fencing panel of size 2.40m x 1.20m fixed on all sides with ISA 40x40x5mm . Three pieces of similar section of 0.25m long be fixed at the bottom frame & two pieces of 20x4mm flat on both the vertical sides be fixed as hold fast. The operation of manufacturing shall including cutting of hard-drawn steel wire fabric square mesh of 3.0mm wire and 25mm pitch, Angle section & welding of wire mesh angle with 20x4mm flats on all four sides and applying a priming coat of steel primer after pretreatment of surface to the entire satisfaction of the Engineer-in-Charge.

Laying, Jointing & Testing in trenches DI pipe class K-7 including all fitting complete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. DI pipe class K-7 100mm dia

DI pipe class K-7 150mm dia

Please Enable Macros to View BoQ information