Upkeep and maint of doors, windows, builders hardware and connected works at Varanasi Cantt.

Amount

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, and removing from site, complete all as specified and directed .

Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, and removing from site, complete all as specified and directed .

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, and removing from site, complete all as specified and directed .

S&F 2nd class hard wood factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed .

S&F 2nd class hard wood factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply of size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick fitted to chowkats, complete all as spfd and directed .

S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed .

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed .

M&L for Framed work conforming to Gde Fe-410-0 or Fe-250-0 as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed .

Supply & Fixing powder coated aluminium openable type window with powder coated aluminium anodized top, bottom and side of aluminium section 61.85 x 31.75 x 1.2 mm thick with shutters having styles & rails of powder coated aluminium section 44.45 x 44.45 x 1.2mm thick including lock, jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handles etc including 5.5mm thick ordinary plain glass complete all as specified and directed .

Supply & Fixing powder coated aluminium three track sliding window / CSW / Ventilator with powder coated aluminium anodized top, bottom and side of aluminium section 61.85 x 31.75 x 1.2 mm thick with shutters having styles & rails of powder coated aluminium section 44.45 x 44.45 x 1.2mm thick including lock, jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handles etc including 5.5mm thick ordinary plain glass complete .

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, , complete all as specified and directed .

S&F 18 mm thick celuka ply of single side prelam /Rigidlam colour fixed with screws, solvent cement/ adhesive to shutters etc inside the shutters complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank(KH-001) Or 8 crank (KH-002) openable at 110 degree for shutters etc complete all as specified and directed.

Supply only 75 mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed.

S & F for 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to steel/Iron chowkats with welding flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete all as specified and directed.

S&F Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium fillet plate/frame of width 50mm and thickness not less than 2mm for window complete fixed on external side all as directed by Engineer in Charge.

S&F Stainless steel wire cloth cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed complete and all as specified and directed.

S&F in repair Stainless Steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed ,complete and all as specified and directed.

S&F 150 mm long alluminium tower bolt, complete and all as specified and directed

S&F in repair 150 mm long alluminium tower bolt, complete and all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt 250 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete and all as specified and directed.

S&F in repair Aluminium alloy, anodised, sliding door bolt 250 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete and all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed.

S&F Aluminium handles, anodised, 150mm size, oval type, stove enamelled black complete all as specified and directed .

S&F Aluminium handles, anodised, 100mm size, oval type, stove enamelled black complete all as specified and directed .

S&F in repair Aluminium handles, anodised, 150mm size, oval type, stove enamelled black complete all as specified and directed .

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 incl dismantling complete all as spfd and directed complete all as specified and directed .

M&L for Glazed ceramic coloured tiles 450X 300X 7mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles having dismantling complete all as specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed .

M&L for Rendering 10 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished even and smooth complete all as specfied and directed.

M&L for Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even and smooth complete all as specfied and directed.

M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of Oil bound distemper smooth wall finish in approved colour/shade over a coat of primer over wall care putty after preparation of surfaces complete all as specified and directed.

M&Lfor Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint smooth wall finish in approved colour/shade, over wall care putty after preparation of surfaces complete all as specified and directed .

M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed .

M&L for Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed .

M&L for Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed .

M&L for Preparation of old steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed .

S&F in repair of 3mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed .

S&F in repair 3 mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed .

Cleaning the gap between aluminium frame & adjacent RCC/ Brick/ Stone work by brushing and filling the gap Upto 10 mm depth and 10 mm width by providing weather silicon sealant over backer rod of approved quality complete all as specified and directed as per direction of Engineer-in-charge .

L.K.R.TIWARI CONSTRUCTION

M/s multienterprises