REPAIR AND MAINTENANCE TO STEEL/WOODEN FURNITURE OF ARMY UNITS AT DHARMUND UNDER AGE (I) BHALRA

Amount

ALMIRAH LARGE OF SIZE 1.8Mx1.2Mx0.4M STEEL WITH SHELVES : Replacement of old existing broken / unserviceable locks of any description and in any position with new locks, six lever with double keys , fixing with suitable nuts including repair of locking device , complete all as specified and directed by Engineer-in-Charge (Make-Godrej Harrison)

Replacement of old existing broken / unserviceable door handles of Almirah large and new door handle of size 100mm long, cast Iron chromium plated of approved make of Almirah shall be fixed with suitable nuts and pins, complete all as specified and directed by Engineer-in-Charge .

Replacement of old existing broken / unserviceable Legs of Almirah and new Legs made out of 1.0mm mild steel sheet including welding of legs where as required, complete all shown in drg and as directed by Engineer-in-Charge

Taking out unserviceable steel clamp with new steel clamp made out of MS sheet 3.00mm thick of size 50mmx20mm including fixing of lose shelves, complete all as specified and as directed by Engineer-in-Charge.

Replacement of old damaged/ unserviceable shelves of Almirah large with new shelf 1.0mm thick Mild Steel Sheet of size 0.765mx0.44m with suitable clamps as shown in drg to be painted with two coat of synthetic enamel paint (Olive green) over a coat of red oxide primer with spray gun stove enamel paint, finish to the required shade , complete all as shown in drg and as directed by Engineer-in-Charge

Replacement of unserviceable locking device from Almirah large steel with new locking device, complete all as shown in drg and as directed by Engineer-in-Charge

CHAIR DINING : Replacement of U/S rear leg from chair dining with new rear leg of seasoned teak wood of size 0.89mx0.030mx0.055m matching with the existing shape and size, complete all as specified and directed by Engineer-in-Charge.

Replacement of U/S front leg from chair dining with new front leg of seasoned teak wood of size 0.46mx0.080m x 0.055m from chair dinning with new front leg of seasoned teak wood matching with the existing shape and size, complete all as specified and directed by Engineer-in-Charge.

Replacement of U/S front/back/side rail from chair dining with new front/back/side rail made out of well seasoned teak wood of size 0.430m x 0.030mx0.065m matching with the existing shape & Size, complete all as specified and directed by Engineer-in-Charge.

Replacement of U/S stiffeners from chair dining with new stiffeners made of size 0.44mx0.025mx0.20m made out of well seasoned teak wood matching with the existing shape & size, complete all as specified and directed by Engineer-in-Charge.

Taking out old damaged/decayed PVC seat frame from its positoin supply and fixing new PVC seat frame of size 360x360x05mm thick white colour complete all as specified and as shown on drg.

Re-canning of chair dining arms with 2 mm wide half round white plastic cane and perimeter canning with 4 mm cane as shown in drawing including supply of new cane as required, complete all as specified and directed by Engineer-in-Charge.

French polish of best quality to the chair dining with arms including preparation of surface complete all as specified and directed by Engineer-in-Charge.

LOCKER STEEL (770X600X950MM, 770X600X450MM , 800X600X450MM & LOCKER BED SIDE) : Replacement of old existing broken / unserviceable locks of any description and in any position with new locks, 80mm six lever with double keys , fixing with suitable nuts including repair of locking device , complete all as specified and directed by Engineer-in-Charge (Make-Godrej Harrison)

Replacement of old existing broken / unserviceable haps and stapples of any description and in any position with new haps and staples 75x4x3mm chromium plated , fixing with suitable secrews , complete all as specified and directed by Engineer-in-Charge Make:Godrej/Harrison

Replacement of old existing broken / unserviceable door handles of locker steel and new door handle of size 100mm long, cast Iron chromium plated of approved make of locker steel shall be fixed with suitable nuts and pins, complete all as specified and directed by Engineer-in-Charge .

Replacement of old existing broken / unserviceable Legs of locker steel and new Legs made out of 1.0mm mild steel including welding of legs where as required, complete all shown in drg and as directed by Engineer-in-Charge .

Replacement of unserviceable locking device from locker steel with new locking device, complete all as shown in drg and as directed by Engineer-in-Charge

PAINTING OF STEEL FURNITURE : Painting of following steel furniture items by providing two coats of synthetic enameled paint of OG/Black/Silver/Smoke/ Gray to match with existing shade with spray gun after properly smoothing the surface with sand paper and applying putty and primer including minor welding/denting etc where necessary all as directed by Engineer-in-charge. (Make-Nerolac/Berger/Assian) (a) Rack post 1650X950MM &1655x950MM with frame

Rack steel 1.2X1.8X0.4MM

Steel locker of size 770X600X950MM & 770x600x450MM

Steel Locker 80x600x450mm & Locker bed side

Steel Double Bunk Complete 1890X800x1730

Steel Sleeping bunk 1890X800x450mm, 1940X925MM 200x815MM &1.95X0.95MM

Trestle store room steel

Shoe rack Steel

STEEL LOCKER OF SIZE 830X480X1900MM (TP) MADE OF SHEET TWO DOOR WITH TWO HANDLES : Replacement of old existing broken/Un-serviceable locks of any description and in any position with New locks, 6 lever with double keys, fixing with suitable nuts including repair of locking divice complete all as specified and directed by Engineer -in-Charge (Make-Godrej Harrison)

Replacement of old existing broken/Un-serviceable door handle of steel locker 100 mm long Cast Iron chromium plated of approved make, with nuts & pins, complete all as specified and directed by Engineer -in-Charge

Replacement of old existing broken / unserviceable Legs of steel locker and new Legs made out of 1.0mm mild steel sheet including welding of legs where as required, complete all shown in drg and as directed by Engineer-in-Charge .

Replacement of old existing broken/Un-serviceable looking mirror from its position with new morror of 5mm thickness and size 700x280mm, complete all as specified and directed by Engineer -in-Charge. Make:Modiguard/Sant gobain

STEEL SINGLE BUNK COMPLETE 1890X800x450 WITH STEEL FRAME WITH SHOE RACK : Replacement of unserviceable/demaged plywood top with from its position with new plywood top 1890mmx800mmx12mm thick, BWR grade as shown in drawing, complete all as specified and directed by the Engineer-in-Charge (make-Kit Ply/National butain/Nova Pan)

Materials and labour for welding to damaged/decayed frame of shoe rack steel complete all as directed by Engineer-in-Charge.

M&L for replacement of unserviceable cushion with new foam cushion of 32 density, 50mm thick x 1890 mm x 800 mm covered with high quality cloured rexzine shown in drawing, complete all as specified and directed by Engr -in-Charge.

MS SINGLE BUNK OF SIZE 1.95X0.95X280MM WITH PLYWOOD AND MATTRESS : Replacement of unserviceable/demaged plywood top with from its position with new plywood top 1.95X0.95X280MMx12mm thick, BWR grade as shown in drawing, complete all as specified and directed by the Engineer-in-Charge (make-Kit Ply/National butain/Nova Pan)

M&L for replacement of unserviceable mattress with new foam mattress of 32 density, 50mm thick x 1.95 mm x 0.95 mm covered with high quality cloured rexzine shown in drawing, complete all as specified and directed by Engr -in-Charge (Make-Sleep well/Kurlon)

STEEL DOUBLE BUNK COMPLETE 1890X800x1730 WITH FRAME : Replacement of unserviceable/demaged plywood top with from its position with new plywood top 1890mmx800mmx12mm thick, BWR grade as shown in drawing, complete all as specified and directed by the Engineer-in-Charge (make-Kit Ply/National butain/Nova Pan)

M&L for replacement of unserviceable cushion with new foam cushion of 32 density, 50mm thick x 1890 mm x 800 mm covered with high quality cloured rexzine shown in drawing, complete all as specified and directed by Engr -in-Charge

STEEL RACK 1.2x1.8X0.4MM : Supply and fixing of shelves made of 1mm thick PBI sheet made to shape as per drg and directed by Engr-in- charge.

Cleaning & preparing surface for Gas welding of the broken of any steel furniture. Welding shall be done in best trade practice and running welding upto 100 mm shall be treated one point all as specified and directed.by Engineer-in-charge.

TRESTLE STORE ROOM STEEL (FD-1043) : Materials and labour for welding to damaged/decayed angles of bottom & bracing top of trestle store room steel complete all as directed by Engineer-in-Charge.

TABLE DINING FOR 06 PERSONS FD-273,376,30 : Repair to table dining of 06 persons including dismantling /removal of all broken parts and replacing with new parts of well seasoned teak wood as under:- Supply and fixing top of the table 18mm thick, exterior grade in natural teak wood shade shall be prelaminated particleboard, 4mm thick teak wood edging all around duly French polished complete all as specified and directed by Engineer-in-Charge (Make of particle board :Kitlam/ Kit Ply/Bhutan Board/Novapan)

Supply and fixing legs of size 0.0.40m x 0.075m x 0.76m made out of well seasoned teak wood as per drg duly French polished including preparation of wooden surface complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Long rail of size 1.80m x 0.025m x0.10m made out of well seasoned teak wood as per drg duly French polished including preparation of wooden surface complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Short rail of size 0.90m x 0.025m x 0.10m of made out of well seasoned teak wood as per drg duly French polished including preparation of wooden surface complete all as specified and directed by Engineer-in-Charge

Flate iron of size 25mm x 3mm, 200mm long bend to shape at right angle shape corner at the junction of top rail meeting with leg complete all as specified and directed Engineer-in-Charge.

TABLE OFFICE CLERK WOODEN 1400x700x750MM WITH DRAWER : Repair to table office clerk wooden including dismantling/removal of all broken parts and replacing with new parts. Table top shall be pre laminated particle board 18mm thick of size 1400mx700m exterior grade in natural teak shade and other side white with PVC beading edging all around. Drawer shall be repaired and should be smoothly functioning. All steel surface of table shall be painted with two coats synthetic enamel paint of existing shade with spray gun after properly smoothening the surface with sand paper and applying putty and primer where necessary. Hard rubber PVC shoe (04 Nos) shall be provided for legs complete all as specified and directed by Engineer-in-Charge. (Make of particle board :Kitlam/ Kit Ply/Bhutan Board/Novapan)

WOODEN CABINET 0.75X0.6X0.90MM , 750x400X800MM : Replacement of old existing broken / unserviceable locks of any description and in any position with new locks, four lever with double keys , fixing with suitable nuts , complete all as specified and directed by Engineer-in-Charge Make:Godrej/Harrison

Replacement of old existing broken / unserviceable door handles of wooden cabinet and new door handle of size 96 mm long, cast Iron chromium plated of approved make of wooden cabinet shall be fixed with suitable secrews, complete all as specified and directed by Engineer-in-Charge .

Replacement of old damaged/ unserviceable shelves of wooden cabinet with new shelves made of 18mm pre-laminated partcle board teak finish as shown in drg , complete all as shown in drg and as directed by Engineer-in-Charge (Make of particle board :Kitlam/ Kit Ply/Bhutan Board/Novapan)

Replacement of unserviceable door shutters from wooden cabinet with new door shutters made of pre-laminated particle board 18mm thick teak finish,, complete all as shown in drawing and as directed by Engineer-in-Charge.

RACK POST 1650X950MM & 1855X925MM WITH FRAME : Replacement of unserviceable/demaged plywood top with from its position with new plywood top 1650mmx950mm & 1855x925MMx12mm thick, BWR grade as shown in drawing, complete all as specified and directed by the Engineer-in-Charge (make-Kit Ply/National butain/Nova Pan)

PACHNANDA BUILDERS (BID ID -3387529)