Maintenance and Repair works to the ICDS at Palani konar street in Ward No.45 West zone.

1. Earthwork excavation in all soils including all initial lead and lift etc complete.

2. Dismantling the existing damaged PCC etc compete as per the direction of the departmental officers

3. Plain Cement concrete 1:4:8 mix one cement, four sand, eight metal)using 40mm size hard broken stones from approved quarry complying with standard specification.

4. Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

5.Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") including cost of materials and labour charges etc., as per standard specification - 1m3

5.Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

4. Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

6. Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

6. Flooring with 20mm thick cement concrete 1:3 mix (no sand to be used) using 3mm to 10mm ISS gauge HBBG chips and the surface rubbed hard and finished smooth with neat cement Ellise pattern surface

7. Painting with enamel paint two coats over one coat of primer coat for iron doors layer by layer with equal intervals using good quality approved colour paint including all cost etc complete.