Construction of Industrial Housing facility building (G plus 3 Floor) at SIPCOT Industrial park, Cheyyar in Thiruvannamalai District.

Amount

Clearing Light Jungle

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting a. 0 to 2 mt.

b. 2 to 3 mt.

Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

Earth work excavation in SDR for Open foundation (excluding refilling) b. 2 to 3 mt.

c. 3 to 4 mt.

d. 4 to 5 mt.

Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

Refilling with excavated earth other than M-sand with an initial head load of 100 mts

Supplying and filling in foundation, basement, etc with filling M-sand in layers of not more than 15 cm thick

Cement Concrete 1:4:8 using 40mm size hard broken stone jelly

MASONARY WORKS Brick work in following In Cement Mortar 1:5 (One Cement : five Crushed Stone Sand) using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc. complete complying with standard specification and as directed by the departmental officers. a) For foundation & basement

b) In Ground floor

c) In First floor

d) In Second floor

e) In Third floor

f) In Fourth floor

Providing and constructing 400 x 200 x 200 Burnt Clay machine moulded perforated/ hollow modular bricks masonry with minimum crushing strength of 35kg/sqcm and maximum water absorption 20% (As per IS 3952), with density of 7N/mm2 and U Value of 1W/M2K" Conforming to IS 2222 in cement mortar in ratio 1:6 a) In Ground floor

b) In First floor

c) In Second floor

d) In Third floor

e) In Fourth floor

Providing and constructing 400 x 100 x 200mm Burnt Clay machine moulded perforated/ hollow modular bricks masonry having minimum crushing strength of 35kg/sqcm and maximum water absorption 20% (As per IS 3952), with density of 7N/mm2 and U Value of 1W/M2K" Conforming to IS 2222 in cement mortor in ratio 1:4 a) In Ground floor

b) In First floor

c) In Second floor

d) In Third floor

CONCRETE WORKS Providing and laying in position, Standardised Concrete Mix M-30 Grade a) For foundation & basement

b) In Ground floor

c) In First floor

d) In Second floor

e) In Third floor

f) In Fourth floor

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) b) For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

c) For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

d) Vertical walls

Supplying, fabricating and placing in position Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically treated bars Fe - 500 / Fe - 550 as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

DADOOING and WALLING Dadooing walls with Granite Tiles - (Superfine Polished with Machine Cut Edges) 10 mm thick of synthetic grey, paradise, and similar varieties of suitable sizes in Cement Mortar 1:2

Dadooing walls with following best approved quality, white / colour glazed tiles (300x450x8mm) in Cement Mortar 1:2

FLOORING AND FLOOR FINISHES Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3

Paving the floor with best approved quality fine polished granite Slab of Steel Grey, granite slab Sixe of 1200mm x 600mm, 16mm to 18mm thick with machine cut edges laid over a cement mortar bed of 8mm thick using cement mortar 1:3

Paving the floor with best quality Stain Free Nano Polish Vitrified Tiles 600x600x8mm of approved colour, shades quality lain in CM 1:3, 20mm thick

ROOFING AND WATER PROOFING WORK 'Finishing the top of Terrace floor with one course of solar reflective water proof, heat proof and cool roof ceramic tiles of size 305mmx305mmx7mm thick of approved quality laid in cement mortor 1:3

PLASTERING AND FINISHING WORK Plastering with Cement Mortar 1:5 ,12mm thick

Providing Two coats of Ceiling putty of 3mm thick for new plastered surface

Stucco Plastering 12mm thick using colour granite chips of size 10mm and below using 72 kgs of cement and 0.15 m3 colour marble chips for every 10m2 area over the existing plastered surface cement mortar 1:5, 12mm thick including curing etc.,

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint with primer of first class quality (For ceiling)

Providing and applying white cement based Putty

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint with primer of first class quality (For inner walls)

Painting two coats of newly plastered External Emulsion Paint with Water based primer on wall surface

Painting new iron works

MISCELLENEOUS WORKS Supplying and fixing wood polymer composite board solid door frame and 25mm thick shutter frame

Providing and fixing factory made FRP door Sutter with FRP door frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm

Supplying and fixing of UPVC Window

Supplying and fixing of UPVC Ventilator

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia

Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate including one coat of primer and labour for fixing in position etc. all complete

Supplying and laying Rubberised interlocking Paver block M-30, 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block over the WMM of 100mm thick as per standard specification,.

Supplying and fixing the Precast Compound wall for all 3 side of the site boundry and the height of the compound wall should be 5 feet for the length of (335m)

Supply, delivery and fixing of barbed wire 10 gauge- Two ply and four pronged (galvanised) fencing work for compound wall using 10 gauge Galvanised iron wire including the cost materials, cost of labour charges for fixing in position to the required height of 2 feet.

Supplying and fixing for Hostel furniture arrangements (Individual bed 0.9mx1.9m, Cupboard 0.45mx1.5m, SS Dining Table with Chair -8'x3') complete as per technical specification and as directed by the departmental officers. a) Individual Cot - 0.9mx1.9m with Three Layers

b) Steel Clothes 6 -Locker Cupboard 0.45mx1.5m

c) SS Dining Table with fixed Chair -8'x3'

Provision for Electrical Works EB METERING In HT supply using LTCT metering box asper IE rules and TANGEDCO norms (Above 150 HP below 200 HP) 112-150 KW etc.,

Labour charges for installation, testing and commissioning of LTCT metering box including labour cost and materials etc.,

Construction of transformer plinth including labour cost and materials etc.,

Labour charges for transformer plinth including cost of tools and plants etc.,

Safety Appliances Supply of following safety accessories of approved make including cost of all materials etc., a) Hand Gloves 11KV Grade

b) 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS

c) First Aid Box complete with all First Aid Medicines

d) AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories

Labour charges for fixing of safety accessories including cost of necessary tools and plants etc.,

LT PANEL Supply of LT panel suitable for 415V, 3 Phase, 50Hz, 4 wire system. Panel shall be Indoor type, floor/wall mounted. Panels to be made up of 16SWG CRCA sheets painted RAL-7032 colour after seven tank pre-treatment process carried. Cable entry shall be provided as bottom/top entry. All incomers shall have segregation from outgoing cable chambers. 75mm height base channel to be provided at the bottom of all floor panels. Each door shall be casketed using nitrile rubber and hinged on each cubicle with insulated door knob.

DISTRIBUTION BOXES VERTICAL THREE PHASE DISTRIBUTION BOARD WITH MCBS 8 way vertical TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm. (used for light loads less than 100A)

Labour Charges for Installation, testing & commissioning of 8 way vertical TPMCB sheet steel distribution board including cost of necessary tools and plants etc.,

7 SEGMENTS (3 TIER) 3 PHASE DISTRIBUTION BOARD WITH MCB 4 way / 6 way / 8 way / 12 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pile incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x 4 ways in each segment) and separate provisions for MCB / Isolator (totally 12 Nos.) for sub incomers in 3 segments with label holder and provisions for taking up cable for size not less than 35 sq.mm.

Labour Charges for Installation, testing & commissioning of 7 Segments (3 Tier) 3 Phase Distribution Board with MCB 8 way TPMCB sheet steel distribution boards including cost of necessary tools and plants etc.,

SINGLE PHASE DISTRIBUTION BOARD WITH MCBs 4 way / 8 way / 12 way vertical SPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single phase MCB outgoings and separate 2 way provision for accommodating One No. 2 pole incoming MCB / Isolator and another separate 2 way provision for accommodating One No. 2 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm.

Labour Charges for Installation, testing & commissioning of Single Phase Distribution Board with MCBs 8 way vertical SPMCB sheet steel distribution board including cost of necessary tools and plants etc.,

2 pole sheet steel enclosure with Double Pole 6A to 32A, 10KA

Supplying of 4 pole sheet steel enclosure with Four Pole 6A to 32A, 10KA including cost of all materials etc.,

Labour Charges for Installation, testing & commissioning of 2 pole sheet steel enclosure with Single Pole & Neutral 6A to 32A, 10KA & 4 pole sheet steel enclosure with Four Pole 6A to 32A, 10KA (15Nos)

HORIZONTAL THREE PHASE DISTRIBUTION BOARD WITH MCBS 4 way / 6 way / 8 way / 12 way TPMCB sheet steel distribution boards flush type / surface type fitted with bus bars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD with label holder and provisions for taking up cable for size not less than 35 sq.mm. TPMCB DB with Metal Door Cover with IP 42 Protection HIGHER END 8 Way Triple Pole & Neutral 63A, 10KA - 1No Triple Pole 6A to 32A,10KA - 6Nos

Labour Charges for Installation, testing & commissioning of Horizontal Three Phase Distribution Board with MCBS 8 way TPMCB sheet steel distribution board including cost of necessary tools and plants etc.,

UPS SYSTEM Supply,Testing and Commissioning of 2 KVA single phase in & single phase output, Double conversion Online UPS system with SMF Batteries back up for 2 hours and suitable MS Rack to accommodate the batteries externally, Open Rack,Dc cable 5mts, Interlinks and breaker etc as required

Labour Charges for Installation, testing & commissioning of 2 KVA single phase in & single phase output, Double conversion Online UPS system including cost of necessary tools and plants etc

DIESEL GENERATOR Supply, installation, testing and commissioning of 125KVA Diesel Generator set of approved makes like Kirloskar / equivalent as per the new CPCB norms complete with all accessories like engine, alternator, batteries with leads, control panel, base frame, ant vibration mounts, residential silencer, 230 liters fuel tank, intake and exhaust piping, fuel oil hand operated pump, other miscellaneous accessories

Labour Charges for Installation, testing & commissioning of 125KVA Diesel Generator set of approved makes like Kirloskar / equivalent as per the new CPCB norms

EARTHING Earthing Station using Pipe electrode as per IS 3043 using 4.5 m of 40 mm dia and 0.15 m of 19 mm dia B Class. GI pipe including earthwork excavation, brickwork in cement mortar, plastering, 38 mm RCC cover for the brick masonry, 19 mm GI Check nuts, bolts, Reducer 40 x 20mm,

Plate earthing with copper plate of size 600 x 600 x 3mm as per the ISI specification with an earth electrode of 2.7 m. Class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm

Supplying and laying of 25mm x 5mm Copper strip at 0.5 meter below ground as strip earth electrode, including connection/terminating with nut,bolt,spring washer etc. as required. (Jointing shall be done by over lapping and with 2 sets of brass bolt nut & spring washer spaed at 50mm.

Supplying and laying of 25mm x 5mm GI strip at 0.5 meter below ground as strip earth electrode, including connection/terminating with nut,bolt,spring washer etc. as required. (Jointing shall be done by over lapping and with 2 sets of GI bolt nut & spring washer spaed at 50mm.

Providing and fixing of 25mm x 5mm copper strip in 40mm dia GI pipe from earth electrode including connection with brass bolt nut with spring washer 2 sets, excavation and refiiling etc as requred.

Providing and fixing of 25mm x 5mm GI strip in 40mm dia GI pipe from earth electrode including connection with GI bolt nut with spring washer 2 sets, excavation and refiiling etc as requred.

Providing and fixing of 25mm x 5mm Copper strip on surface or in recess for connection etc, as required.

Providing and fixing of 25mm x 5mm GI strip on surface or in recess for connection etc, as required.

Providing and fixing of 4.0mm dia copper wire on surface or in recess for connection etc, as required.

Providing and fixing of 6 SWG GI wire on surface or in recess for connection etc, as required.

LT CABLE Supply, laying, dressing, Testing and commissioning of 1.1kV grade LT PVC insulated, cores laid up, PVC tape inner sheathed, GI wire/strip armoured, extruded PVC Tape type ST2 outer sheathed aluminium conductor cables of following sizes. Rate shall be same for laying on trays, clamping on wall and laying in trench. a) 31/2 core 240 sq.mm. PVC Armoured UG Cable

b) 31/2core 25 sq.mm. PVC Armoured UG Cable

c) 4 core 16 sq.mm. PVC Armoured UG Cable

d) 4 core 6 sq.mm. PVC Armoured UG Cable

e) 2 core 6 sq.mm. PVC Armoured UG Cable

Supply and Run of 4 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

LT CABLE TERMINATION Supply & terminating the ends of cables of following sizes using Siemens type single compression cable glands, crimping type Aluminium lugs of required size, crimping paste, tapes, bolt & nuts, double washers, spring washers, gland earthing clips and 22SWG bar copper wire, etc. complete. Each cable shall be identified with cable tags above the panel / DB. Cable shall be properly dressed before termination and bent at an angle of 15 times the radius of the cable. No extra holes shall be made on top of the panel and if any made, shall be sealed properly. The final tightness at every terminal shall be done with a torque wrench and tightened up to the recommended level. a) 31/2 core 240 sq.mm. PVC Armoured UG Cable

b) 31/2core 25 sq.mm. PVC Armoured UG Cable

c) 4 core 16 sq.mm. PVC Armoured UG Cable

d) 4 core 6 sq.mm. PVC Armoured UG Cable

e) 2 core 6 sq.mm. PVC Armoured UG Cable

14 SWG TC Wiire for Gland earthing

LIGHTING & SUBMAIN WIRINGS Wiring for light point/fan point /Exhaust fan point/call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable etc,as required. Group A

Wiring for Circuit / Submain along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. a) 2 x 1.5 Sq.mm + 1 x 1.5 Sq.mm earth wire

b) 2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire

2 x 4 Sq.mm + 1 x 4 Sq.mm earth wire

POWER SOCKETS Supply, Installation, testing and commissioning of various socket configurations. Rate shall be inclusive of front plate, GI back Box dummy if necessary and other associated accessories in the concerned location as required as per site conditions. Color of the switches, sockets and front plates would be as per approval. a) 3 Nos 6A Universal sockets suitable for flat / round pins controlled by 1 no 16A switch.

b) 1 No 6A universal sockets suitable for flat / round pins controlled by 1 no 6A switch.

c) 1 No 6/16A universal sockets controlled by 1 no 16A switch.

LIGHT FITTINGS & FANS Supply, Installation, testing and commissioning of following light fixtures with all support accessories as required at site. a) 20W 4 Feet LED Fitting with LED

b) 7W / 9W LED Bulb

c) 60W LED Street Light Fitting with LED.

d) LED Flood Light 100W with Integrated Driver

e) AC Ceiling Fan complete 1200 mm (48") Sweep with 300mm Down Rod (without Regulator)

f) AC Exhaust Fan 300mm (12") Sweep (Light Duty)

8 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 114.30mm OD x 5.40mm Thick x 4500mm Length, 88.90mm OD x 4.85mm Thick x 1750mm Length, 76.10mm OD x 3.25mm Thick x 1750mm Length

Supply, installation and commissioning of Weatherproof Synthetic Moulded Compound Box for Street Light including cost and labour charges for instalation etc.,

CABLE TRAY Supply and fixing of perforated cable trays of sizes without cover as given below made out of 16 SWG CRCA sheet steel and hot dip galvanized with supports and at every 1.2 mtr. Interval 300mm width and 50mm height.

Supplying and fabrication of MS ANGLES 11/2"x11/2"x1/4" (37.5 x 37.5 x 6.24mm) (1M=3.25 kg) including cost materilas, welding charges and labour charges etc.,

Solar Power Plant Supply, Installation, Testing and Commissioning of Ongrid Roof top solar power plant inclusive of 5 years comprehensive maintenance with approved make solar panels manufactured in india (30Kwp On -Grid roof top Solar PV system with 550 wp )and with INVT/JFI/equivalent inverters -1 No as per MNRE standards.

TV & NETWPRK ITEMS Supply and Drawing of UTP 4pair CAT6 LAN cable in the existing surface/recessed steel/pvc conduit as required

Supply and Drawing of Coaxial TV RG 6 Grade , 0.7mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/pvc conduit as required

Supplying, fixing and concealing of (I/O Socket -higher end) Data socket outlet (RJ45) including Cost of materilas and labour charges fixing of etc.,

Supplying, fixing and concealing of (I/O Socket -higher end) Telephone socket outlet (RJ-11) including Cost of materilas and labour charges fixing of etc.,

Supplying, fixing and concealing of (I/O Socket -higher end) TV Antenna socket outlet (CAT 6 PVC Module Box) including Cost of materilas and labour charges fixing of etc.,

Supplying, fixing and concealing of (I/O Socket -higher end) Face Plate Dual Socket RJ-45 including Cost of materilas and labour charges fixing of etc.,

Supplying and laying of 10 pair unarmoured 0.5mm telephone cable including cost of materilas and labour charges for laying telephone cable etc.,

Supplying and laying of 2 pair unarmoured 0.5mm telephone cable including cost of materilas and labour charges for laying telephone cable etc.,

Supply and Installation of 32" TV for continious 24 Hrs operation with associated mounting brackets as required etc., including cost of material, transportation, Checking etc.,

Supply and fixing of 24 Port LAN Network Switch including cost of material, transportation, Checking etc.,

Supply and laying of 25mm PVC rigid pipe all conduit accessories as required concealed in wall and ceiling with necessary junction and openings at required locations for the drawal of communication wire.)

MISCELLANEOUS ITEMS Supply and laying of HDPE Pipe 120mm / 103.50mm for road crossing of Electrical & Network cables etc.,

Labour for Earth Excavation for electrical cables upto 600mm depth 450mm width and refilling with excavated soil. Rate shall include spreading of m sand and bricks over the cable for protection.

Providing scaffolding arrangments for fixing of cable tray in duct upto 13m including cost of scaffolding materials and labour charges,transpotation charges etc.

Supply and laying of 25mm PVC rigid pipe all conduit accessories as required in wall and ceiling with necessary junction and openings at required locations for the drawal of communication wire.) etc.,

Supply and laying of 32mm PVC rigid pipe all conduit accessories as required in wall and ceiling with necessary junction and openings at required locations for the drawal of communication wire.) etc.,

Plumbing Works Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trap with double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.

Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trap with double flapped rigid PVC seat cover with CP brass hinges etc.

Supplying and fixing Wash Hand Basin of size 550 x 400mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. (The Wash basin should be got approved by the Executive Engineer before use on works.

Supplying and fixing heavy duty 15mm CP shower unit comprising of CP 15mm dia hot & cold mixer with CP spout, overhead shower set comprising of CP shower arm, rose etc.,complete with CP wall flanges. The rate including cost of all materials, labour charges and transportation etc. completed as directed by Engineer-in-Charge.

Supplying and fixing Brass Chromium Plated Towel Rail 60cm long and 20mm dia with brackets of same materials including cost of teak wood plug & CP screws etc., complying with standard specification and as directed by the Department officers.

Supply and fixing of white colour viterous china Urinal with push cock for flushing with in built waste grating, C.P.cast brass bottle trap with extension piece including CI/MS bracket wall flanges, flush piping, flexible hose,extension nipples, etc.,complete

Supply and fixing of Stainless steel Double bowl sink with drain board manufactured from 1 mm thick stainless steel, 18G high grade indestructable chrome 'nickel steel with top quality polish, 1 no. 50 mm dia CP waste pipe connect with 'P' trap of minimum 40mm water seal, 20mm dia CP swivel spout wall mounted type and necessary wall flanges etc., complete.

Supply and fixing of CP Long body bibcock, including cutting, chasing & making good the walls.

(INTERNAL DRAINAGE & WATER Providing PIPES , FITTINGS & VALVES) Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines. (Pipes Running inside the toilet & etc) a) 75mm dia (6kg/sq.cm pressure rated - Type - B)

b)110mm dia (6kg/sq.cm pressure rated - Type - B)

Providing, fixing and testing of PVC waste pipe of agricultural sereis conforming to IS 4985 including all fittings like tees, elbows, bends, collars, coupling, etc jointing with solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete. a) 40mm dia (10kg / sq.cm)

b) 50mm dia (10kg / sq.cm)

Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ).

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes SDR-11 upto 50 dia pipe, from 65mm dia CPVC Sch-40. having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Internal) a) 20mm Dia

b) 25mm dia

c) 32mm dia

d) 40mm dia

e) 50mm dia

f) 65mm dia

g) 80mm dia

Supplying & fixing in position first quality & approved variety of various dia G.M gate Valves with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements. a) 20mm Dia

b) 25mm dia

c) 32mm dia

d) 40mm dia

e) 50mm dia

f) 65mm dia

g) 80mm dia

Providing and fixing gun metal Non- return valve of approved quality (screwed end) : a) 40mm nominal bore

b) 50mm nominal bore

c) 65mm nominal bore

d)80 mm nominal bore

Providing, installation, testing and commissioning approved make CI Y-type Strainer conforming to IS standard with necessary companion flanges, neoprene gaskets(10Kg/sq.cm. pressure rating) nuts and bolts including all the accessories to complete the work as per the specifications. a)80 mm nominal bore

(EXTERNAL DRAINAGE & WATER Providing PIPES , FITTINGS & VALVES) Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines. (Pipes Running in the Shaft & below ground level) a) 75mm dia (6kg/sq.cm pressure rated - Type - B)

b)110mm dia (6kg/sq.cm pressure rated - Type - B)

c)160mm dia (6kg/sq.cm pressure rated - Type - B)

d) 200mm dia (6kg/sq.cm pressure rated - Type - B)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes SDR-11 upto 50 dia pipe, from 65mm dia CPVC Sch-40. having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (External) a) 20mm Dia

b) 25mm dia

c) 32mm dia

d) 40mm dia

e) 50mm dia

f) 65mm dia

g) 80mm dia

Providinging and fixing in position PVC Vent cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works). b) 110 Dia

Providing and fixing GI. puddle flanges (IS; 1239) fabricated out of 6 mm thick M.S. plate of size 300 x 300mm plus dia of pipe of 750mm long pipe pieces fixed to RCC wall of water tanks. Including painting with two coats of primer complete as required. The entire fitting shall be hot dipped galvanized. a) 50mm dia

b) 65mm dia

c) 100mm dia

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type

Constructing in site of Inspection chambers comprising burnt brick/solid block masonry walls of 230 mm thk., built in CM 1:4 over M-15 CC bed of thickness 100 mm ,Heavy duty RCC precast cover (SFRC), benching in CC M-15, internal faces plastered smooth in CM 1:4, 15mm thick and outside Rough Plastered with CM 1:6, 15mm thick including necessary earth work excavation returning and refilling and disposing surplus soil as directed by the Engineer in charge. 600x600 mm size internal and depth will 450mm to 1200mm

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.(600x600mm)

Providing, fixing and testing of Terrace Rain water gratings with all the accessories etc,.

DOMESTIC WATER BOOSTER PUMP: Supply , fixing and commissioning of Hydropneumatic pumps (1 working and 1 standby) Vertical in line type for pumping the water from underground sump to distribution header running buried underground level through hydropneumatic pressure vessel for domestic purposes. The pump shall be coupled to adequate H.P. electrical motor, mounted on a common base frame made out of 'GI' with necessary bolts and nuts.

DOMESTIC WATER TRANSFER PUMP: Supply , fixing and commissioning of Transfer pumps (1 working and 1 standby) Vertical/Horizontal in line for pumping the water from Treated water underground sump to Domestic water overhead tank for domestic purposes. The pump shall be coupled to adequate H.P. electrical motor, mounted on a common base frame made out of 'GI' with necessary bolts and nuts.

FLUSHING WATER TRANSFER PUMP: (For Landscape) Supply , fixing and commissioning of Transfer pumps (1 working and 1 standby) Vertical/Horizontal in line for pumping the water from STP to landscape for domestic purposes. The pump shall be coupled to adequate H.P. electrical motor, mounted on a common base frame made out of 'GI' with necessary bolts and nuts.

(SEWAGE TREATMENT PLANT : DESIGN CAPACITY - 60.00 CU.M / DAY OPERATING DURATION - 24 HRS) Design, Engineering, and providing all equipment / machinary at site, installation and commisioning of equipments/ electricals/ piping . STP Plant : 60 KLD STP Proces : MBBR Process ( Packaged type) Design, Supply and Installation of 60 m3/day sewage treatment plant based on MBBR Technology. Supply and Installation of ultraviolet unit for disinfection. Supply and installation of filter press for sludge dewatering. Fabrication unit (MBBR tank, Settling tank, Filter tank, Sludge holding tank, Treated water tank including pump). Civil cost (Foundation, Pre treatment unit) Manhole lifting station pump

(DRINKING REVERSE OSMOSIS PLANT -50 LPH) Design, Engineering, and providing all equipment / machinary at site, installation and commisioning of equipments/ electricals/ piping inclusive of all types of taxes and duties as described in specification. (Tenderer shall specify flow parameter and tis technical specification of the equipments envisaged below as per vendor design and system requirement.) Plant Logistics: Feed Rate : 100 Lit./hr Product Rate : 50 Lit./hr Product Recovery : 50 % Quality of Outlet water from RO: Total Dissolved Solids : < 100 mg/l

(SOLAR HOT WATER SYSTEM + HEAT PUMP - 4800 L/day) 1) Supplying, installation, testing, and commissioning of solar water heating system with solar panels / Evacuated tube collectors confirming following specifications for generation of hot water : 2) Supplying, installation, testing, and commissioning of Solar Hot water storage tank confirming following specifications for storage of hot water : 3) Supplying, installation, testing, and commissioning of Heat pump. 4) Supply and fixing of approved make Chlorinated Polyvinyl Chloride pipes (CPVC) up to 50 mm dia SDR.11.0, ASTM CTS, and above 50 mm dia CPVC schedule 80 ASTM IPS. Fittings up to 50 mm dia SDR 11.0. The fittings and specials. 5) Supplying, installing, testing and commissioning of Hot water return pumps (1no working). Pumps shall have bronze body, bronze impeller and SS shaft with rotary shaft (Mechanical) seal. Pump shall be suitable for automatic / manual operation.

Provision for fire fightings & CCTV arrangements Supply, Installation, Testing and Commissioning of ANALOG CONVENTIONAL FIRE ALARM SYSTEM Supply, installation, testing and commissioning of Micro Processor based conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.

Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers

Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers.

Supply, Installation, Testing and Commissioning of CCTV System Supply & Installation & Commissioning of 1/3'' CMOS,1280x960:25fps(P)/30fps(N), 0.01lux/f1.2, 4mm/f1.8 lens, Electronic Day/Night Network Dome Camera (with mounting bracket adjustable type)

Supply & Installation of Network Video Recorder with 4HDDs Storage Capacity, 32-Channel Video, 2 Client Licenses, & supports H.264 Compression, Real time Surveillance, With 2 CIF Resolution 25 FPS for 29 Cameras

Supply & Installation of 10 TB hard disk (30 Days backup) including cost of material, transportation, Checking etc.,

Supply & Installation of 32" LCD TV with associated mounting brackets as required etc., including Cost of material, transportation, Checking etc.,

Supply & Installation of 24 Port Layer 2 manageable POE Network switch (24 PORT-10/100 BASE-T & 2 NOS. 1-G COMBO PORT FOR UPLINK)

Supply & Installation of 32" LCD TV with associated mounting brackets as required etc., including Cost of material, transportation, Checking etc.,

Supply & Laying of CAT6 SL Series Patch cords Camera Side with associated mounting brackets as required etc., including .Cost of material, transportation, Checking etc.

Supply & Laying of (Combo D-RJ45 CAT6E Lan I/O Network Keystone Jack, Gang Box, Single Port faceplate panel side

Supply & Laying of (Combo D-RJ45 CAT6E Lan I/O Network Keystone Jack, Gang Box, Single Port faceplate camera side

Supply & Laying of CAT6 UTP Cable with PVC conduit with associated mounting brackets as required etc., including .Cost of material, transportation, Checking etc.

Supply, Installation, Hand held & Automatic Extinguisher Supply of Hand held Fire Extinguisher - CO2 - 4.5 Kg with suitable Metal Floor stand MS fabricated painted in black colour

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers

BOOSTER PUMP Supply, erection, testing and commissioning of mono block Booster pump rated for 450 LPM .The pump shall be of high efficiency volute type with cast rion casing, bronze impeller pump coupled to a squirrel cage induction motor of suitable HP. The pump set with all accessories such as standard coupling, coupling guard, base plate, foundation plate, antivibration pads and bolts etc. including connected civil works etc

Auto cut off on panel for the monoblock motor pumpset of 450 LPM pump with necessary cable & fittings.etc.,

Above ground piping - Supply ,laying testing and commissioning of M.S black pipes of class 'C'. The pipe should confirm to IS 1239 with required attachments .The pipes shall be painted with two or more coats of red colour enamel paint over two coats of anti corrosive primer. Pipes to be clamped with structural steel supports such as MS channels, angles, flats, rods as required at site with anchor fasteners, clamps, threaded rods, nuts, bolts, washers etc. where ever required. b) 100 mm dia

c) 80mm dia

d) 25mm dia

Supply, erection, testing and commissioning of Gun Metal Non-Return Valve of size 50mm dia including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying, fixing and incidental charges etc., complete as per standard specification and as directed by the Departmental Officers. a) 150 mm dia

Supply, installation, testing and commissioning of Butterfly valves of following sizes with non rising bronze spindle cast iron body flanges drilled to IS 1538 PN 1.6 grade complete , as per IS 780 etc complete. a) 150 mm dia

Supply, installation, testing and commissioning of `Y' - Type Strainer with Flanged ends of following sizes a) 150 mm dia

Supply, erection, testing and commissioning of Gun Metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed atpump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc.,complete as per standard specification and as directed by the Departmental Officers. a) 25mm dia

Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers

Supply ,installation, testing and commissioning of Servicing the First Aid Hose Reel Drum assembly by disconnecting from hydrant line, replacing shut off nozzle, warm clip, lubricating the rotating assembly, replacing 20mm dia, 30 metres long rubber hose, reconnecting with hydrant system as per standard methods and as directed by the Departmental Officers

Supply, Erection and Commissioning of 1No of Passengers lift (13 Persons - 884 Kgs.) at site according to the following specification

BHARATH BUILDING CONSTRUCTION (BID ID -1076609)

JOHNSUN ENGINEERING CONTRACTORS (BID ID -1076275)

K. BASKARAN & CO (BID ID -1081047)