REPAIR TO JOINERY, FLOORING, PLASTERING, AND SANITARY FITTINGS IN MAP LINE AREA UNDER AGE B/R-I OF GE JAIPUR

Amount

Taking down cement plaster or cement lime plaster, any description on brick, stone walls or concrete surface of ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick masonry surfaces or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on stone masonry surfaces or on surface other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6 on stone masonry surfaces or on surface other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer over 2mm thick wall care putty to make smooth the surfaces incl rubbing all as directed by Engineer-in- Charge.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over one coat of primer over 2mm thick wall care putty to make smooth the surfaces incl rubbing all as directed by Engineer-in- Charge.

M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over one coat of primer complete all as directed by Engineer-in- Charge.

M & L for preparation of new plastered wall surfaces and applying two coats of premium acrylic smooth exterior emulsion weather proof paint (company dipo tinted) of approved manufacturers in required colour and shade with Anti Algal properties as per manufacturer instructions over a coat of primer over 2mm thick wall care putty incl rubbing upto G+3 (four) storey building including scaffloding arrangement complete all as specified and directed.

M&L for preparation of old painted surfaces of ceiling and applying one coat of Oil bound Distemper complete as specified and directed.

M&L for complete removal of existing treatment on walls incl washing and rubbing down and applying two coats of premium acrylic smooth exterior emulsion weather proof paint (company dipo tinted) of approved manufacturers in required colour and shade with Anti Algal properties as per manufacturer instructions upto G+3 (four) storey building including scaffloding arrangement complete all as specified and directed.

M&L of 2 mm thick wall care putty on any surface to make the surface smooth and rubbing down complete all as specified and directed.

M&L for preparation of old painted wooden or wood based surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified & as directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness, from roof coverings etc complete all as specified and directed.

M&L pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws /J hook, L-type crancked hook complete all as specified and directed

M&L pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of approved colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws /J hook, L-type crancked hook complete all as specified and directed

S&F Steel work in trusses fabricated with reactangular / Square hollow section, including special shaped washers etc including cutting welding, bending in shape etc using tube of YST 310 grade confirming to to IS-4923 complete all as specified & directed.

M&L for preparation of new or previously untreated steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;drainage crossings, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed

Taking down existing roof treatment complete including demolition of PCC, Mud phuskas, lime concrete etc any description upto mother slab, and properly cleaning the surface to remove loose particles with wire brushes and removing the debris out side of MoD land complete all as specified and as directed.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying avg 30mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) finished even & smooth without using extra cement to cover negative slope into prop complete all as specified and directed

Supply only Integral water proofing compound ISI marked complete all as specified and directed.

M&L screed plaster 15mm thick in cement mortar (1:4) on concrete surfaces of roof to receive water proofing treatment and finished the surface even and smooth without using extra cement etc incl mixing of WPC as per manufacturers instruction complete all as specified and directed. Note:- Integral water proofing compound paid seperately as supply only

Supply and laying water-based, single component UV resistant, elastomeric PU liquid water proofing coating, having SRI >109 with an elongation of >400% and tensile strength of 1.4 MPa as per ASTM D 412, 80 % Solid Content, shore A Hardness of min. 50 as per ASTM D 2240 using roller in four layer (Primer coat, First coat, Fibre reinforce mesh & final coat) providing 1.2 mm DFT as per manufacturers specifications and instruction complete all as specified and directed. Application:- (a) Surface to be treated shall be free from loose particle etc then apply first coat of liquid water proofing as a primer on the surface with diluting as per manufacture instruction and allow the surface to dry for min 10-12 Hr time period. (b) Apply Second coat of Liquid water proofing without dilution on the primed surface and allow time to dry the surface for min 10-12 hr. (c) Apply Fibre reinforce mesh as per manufacturers instruction (iii) Applying third coat of liquid water proofing without dilution over the fibre rei coat and Allow minimum 48 hours before subjecting the painted surface to service. Note : (i) Work shall be carried out through authorized applicator of manufacturers only (ii) Material shall be used as per technical data / instruction of manufacturer after written approval of garrison engineer before execution at site and contractor shall submit guarantee of roof treatment work for TEN years Make:- Asian Paint : PU Aqua, M/s STP LTD- Shaliurethane BTD, Berger : Elastoseal BTD, Fosroc : Nito proof as approved by GE

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub-class 'B' bricks (using old size bricks), straight or curved on plan exc 6m mean radius built in In cement mortar 1:6 complete all as specified and directed

M&L for Walling of squared rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness, laid dry or laid dry and pointed in any mortor in floor, apron etc complete all as specified and as directed

M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15mm thick screed bed in CM (1:6) finished complete all as specified and directed.

M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surface such as dado / skirting / risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for joint free coloured non skid ceramic tiles of design as approved, 7 to 8mm thick (Square/rectangular) area of each tile 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for joint free coloured non skid ceramic tiles of design as approved, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 10 mm thick wall plaster in CM 1:4 complete all as specified and directed

M&L for glazed ceramic coloured tiles 450 x 300 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed.

M&L for joint free coloured non skid ceramic tiles of design as approved, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm on vertical surfaces of wall such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement match the shade of tiles over and including 10 mm thick wall plaster in CM 1:4 complete all as specified and directed

M&L for machine cut kota stone slab flooring 20-25mm thick (each slab not less than 0.25 sqm) in floor laid over and incl 15mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing complete all as specified and directed .

M & L machine cut kota stone slab 20-25mm thick on vertical surface of wall, riser, steps, skirting, dado and pillar etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10 mm thick cement plaster in CM 1:4 including rubbing and polishing complete all as specified and directed

M & L Machine cut kota stone slab flooring 20-25mm thick in single piece fixed in cupboard partion including rubbing and polishing complete all as specified and directed.

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Rounding to edges of stones slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed.

M&L for rubber moulded coloured chequered cement concrete tiles, 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15 cm thick (below or above ground level) complete incl removal all rubbish material outside of MoD Land all as specified and as directed.

M & L rubber moulded machine pressed precast concrete wetcast interlocking paver block, coloured, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with coloured cement and pigment laid over 25mm thick sand cushion layer complete all as specified and as directed. Note : Sand cushion shall be measured and paid seperately

,---ditto--- all as per srl item No. 46 above but Except tiles complete all as specified and as directed.

M&L sand filling under floors or in foundations including watering, spreading and levelling in layers of 25 mm thick complete all as specified and as directed.

M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for hardcore of broken stone boulder of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to true surface complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.

M & L PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in coving at juction of chajja/slab and wall/ lintel/ beam finished even and smooth in any situation and position including form work complete all as specified and directed.

M & L for WPT in sunken floors as described here under:- (i) Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 incl mixed with and incl liquid water proofing compound @ 150 ml per bag of cement. (ii) Applyying two coats of pitch free polyurethane elastomeric single compound liquid membrane with UV resistence, approx thickness of layer (1-2mm)(in two coat of min 600 micron each ) with coverage of 0.94 kg per sqm in each coat complete all as specified and directed by Engineer-in-charge with following specification of liquid membrane (i) Elongation 400%ASTMB-412 (ii) Tensile strength-2.10 Mpa ASTMD-412 (iii) Crack bridging at low temp-1.5mm ASTMC-836 including preparation of surface and filling cement concrete 1:4:8 type D2 (40mm graded aggregate) ,including demolition existing sunken treatment complete all as specified an as directed Note :- (i) liquid membrane water proofing membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Liquid waterproofing also included under this item only Note : Floor area only will be measured for payment purpose.

Hacking out old broken glass (any thickness, size, quality or description) from metal/aluminum frame including punching or drilling out old glazing pin/spring/ clip complete all as specified and directed.

S & F 3mm thick plain sheet glass ordinary quality and glazing with and incl silicon in sqaures not exc 0.5 sqm in each pane complete all as specified and directed.

S&F for 3.0 mm thick figured glass ordinary quality and glazing fixing with and incl silicon in sqaures not exc 0.5 sqm in each pane complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

S & F for Solid wood grain printed PVC sheet door frame of size 50mm x 95mm made by joining 3nos. Heat bent PVC Sheet `C' Channel of 5mm thickness of sizes 35mm x 30mm x 25mm & 40mm x 35mm x40mm & 25mm x 30mm x 35mm using solvent cement. The two side `C' Channel shall be reinforced with M.S. tube of size 19mm x 19mm. All the three `C' channel Shall be fixed to flat base of 5mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and joined by inserting 4nos. 150mm long brackets of 15x15mm M.S. Square tube inside the 19mm x 19mm square tubes & remain each of then with four screws as indicated in the drawing.

S&F for 35 mm thick Factory made solid EPS core PVC Moulded Door shutter, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design, consisting of frame made out of MS tube 20 mm x 40 mm. The core panel shall consist of 25 mm thick high density EPS routed with design, sandwitched in between front side moulded prelam 2 mm thick Moulded PVC sheet on one face and 2 mm PVC sheet on other side. The shutter on all edges to be sealed with lipping of 10 mm (5mm x 2) thick x 25 mm wide PVC sheet on other side & 60 mm wide PVC sheet for lock lock rail side . the lipping shall be bonded to the 2 mm moulded / plain PVC sheet with solvant cement asas specified and shown on serial pages No. 142, 143, 144 , 145 & 146 of SSR 2010 (Part-II) and Particular specification & as directed by Engineer-in-charge. Note :- (i) The PVC doors shall be fixed as per manufacturer's instructions and as directed by Engineer-in-charge.

S & F 30mm thick flush shutters solid core construction with block board core and plywood face panels, commercial on both side fixed with approved adhessive incl lipping all round the edges of door as per manufacturers instructions complete all as specified and directed.

M&L for decorative laminate type-I, 0.9 mm thick, colour and pattern as approved fixed as in door shutters complete all as specified and directed.

S & F 35mm thick second class hardwood glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash bars any numbers , fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. Note :- Glass/gauge shall be measured and paid for separately

S & F 35mm thick factory made plain framed, panelled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003(Part I) complete as directed and specified.

S & F SS (grade-304) barrel tower bolts not less than 12 mm dia of extruded section, 150mm long and fixed with screws complete all as specified and directed.

S & F 300mm long stainless steel (grade SS-304) sliding door bolt, bolt type, not less than 12mm dia with & including a min of six bolt & nut, four on bolt plate & two on staple plate and fixed complete as directed and specified.

S&F Stainless steel (grade-304 mortice lock, vertical type, size 125mm, 4 Levers with escutcheon plates & two keys fixed in any frame complete all as specified and directed

S & F 150mm size SS (grade-304) handles, cast moulded type fixed with screws complete all as specified and directed.

M&L for prearation of new or previously untreated steel and iron surface of any description, over 10cm in width and girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide (zinc chrome) primer complete all as specified and directed.

M&L for preparation of new wooden or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F SS(SS-304) butt hinges 100 mm size medium weight and fixed complete fixed in stone choukats all as specified and directed.

Supply & fixing in repair Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty

M & L for repair of broken projecting type/ box type hinges of steel window/ ventilators including new hinges fixed by welding incl matching with existing surface and easing the window for opening and closing complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each and refixing after easying in the same opening complete as directed and specified.

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete Fe 290 (Gde- E- 165) complete all as specified and directed. Note:- Cost of welding butt hinges to the door frame deemed to included in quoted rate also adjucent area damage during fixing door frame will be repair by contractor without any extra cost.

S&F in repair factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay compete with glazing bars devetailed or welded incl inserting the holdfast in stone/brick masonay and make good the distrubed masonary incl taking down old window complete all as specified and as directed.

S & F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars devetailed or welded incl inserting the holdfast in stone /brick masonay and make good the distrubed masonary incl taking down old window complete all as specified and as directed.

S&F factory made steel ventilator with top hung shutter without glazing bars to receive wire gauge etc including hinges steel peg stay etc complete incl taking down old ventilator and make good the distrubed masonary incl taking down old window complete all as specified and as directed.

S&F in repair S & F SS (grade-304) barrel tower bolts not less than 12 mm dia of extruded section, 150mm long and fixed with screws complete all as specified and directed.

S&F in repair 300mm long stainless steel (grade SS-304) sliding door bolt, bolt type, not less than 12mm dia with & including a min of six bolt & nut, four on bolt plate & two on staple plate and fixed complete as directed and specified.

S & F in repair 150mm size SS (grade-304) handles, cast moulded type fixed with screws complete all as specified and directed.

S & F in repair 150 mm long door stopper of stainless steel body with two number rubber shoes complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed. .

S&F Pressed steel frames of size 125 mm x 60 mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete providing mild steel 6 mm dia threshold bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

S&F Pressed steel frames of size 105 mm x 60 mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete providing mild steel 6 mm dia threshold bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window or door complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window or door complete all as specified and as directed.

S&F in repair 25 mm dia SS (grade 304) drapery/curtain rod medium weight incl taking down old one with finials, brackets etc complete all as specified and directed

S&F SS (grade-304)brackets/ end brackets for holding 25mm dia drapery rod with and incl SS (grade-304) Finials, fancy type of approved make and pattern suitable for 25mm drapery rod complete all as specified and as directed.

Providing and fixing factory made uPVC white colour Sliding window (Area not exceeding 2.00 sqm each) Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware : Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories for fixing of window complete all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

S&F 4.8 mm thick sheet glass, odinary quality and glazing with neoprene beading in square exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 4.8 mm thick figured glass, odinary quality and glazing with neoprene beading in square exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair bib taps 15mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.

S&F in repair pillar taps 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.

S&F as in repair 15 mm bore two way bib tap, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs vitreous china wash hand basin with pedestal white flat back size 550 x 400 mm excluding taps, waste pipe, chain & plug and porcelene stopper but including brackets /fastners, cutting for and pinning in ends of brackets and 32mm dia brass chromium plated waste coupling and PVC waste pipe complete all as specified and directed.

S&F in repair 15 mm Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair soap dish, stainless steel, approx size 160x160x90 mm fixed with chromium plated brass screws complete all as specified and as directed.

S&F in repair stainless steel CP towel rail 20mm dia, D type 60 cm long between flanges complete all as specified and directed.

S&F in repair 15mm bore stop/angle valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed for iron pipes or for unions and fixed complete all as specified and directed.

S & F in repair vitreous china squatting pan, 'Orissa" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S' trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed.

S&F in repair PVC Connections 15mm size, 450mm long with PTMT nuts complete all as specified and as directed.

Taking up or down 15mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed

Taking up or down 20mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed

Taking up or down 25mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed

S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed

S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

S&F 25 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

Fixing only 20 mm dia old steel water tubing and connections in new or old positions fixed to walls, ceiling or in floor etc incl new fittings complete all as specified and directed. Note : (i) Steel tubing obtained from dismantling shall be used under this item (ii) Quoted rate shall be included new fitting

S & F in repair 15mm bore wall mixer, brass, chromium plated, fancy type, 3-in-1 for mixing hot & cold water, with L-bend pipe for connection to overhead shower, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S&F in repair SS chromium plated shower rose 150mm x 150 mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 100mm dia CP stainless steel grating including jointing with solvent cement complete all as specified and as directed.

S & F in repair 110mm bore UPVC (SWR) pipes Grade 'B' single socketed in any length with rubber ring joints, laid in trenches or in floor ( Joining to be done with solvent cement ) including PVC brackets.

M&L for concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes of 110mm dia incl. packing under and hanching against the side of pipes after laying and testing of pipe complete all as specified and directed.

S&F in repair 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified & directed.

S&F in repair 110 mm UPVC (SWR) ventilation and rain water pipes (type A conforming to IS-13592) single socketed, in any length with rubber ring joints fixed to wallls with suitable size clamp complete all as specified & directed.

S&F in repair 110 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to wallls with suitable size clamp complete all as specified & directed.

S&F in repair 75 mm bore UPVC (SWR) drainage pipes (type B conforming to IS-13592) single socketed in any length with rubber ring joints fixed to wallls with suitable size clamp complete all as specified & directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

S& F in repair PVC (SWR) gully traps of size 125/110 setting and jointing with solvent cement complete all as specified and directed.

S & F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl 20mm dia ball valve high pressure of PTMT with polythene flynut and aluminium rod incl dismantling of old tank all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.

S & F in repair 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl 20mm dia ball valve high pressure of PTMT with polythene flynut and aluminium rod incl dismantling of old tank all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level or high level 10 ltr capacity, white, with intel, ball valve, float and handle including brackets, flushing pipe complete all as specified & directed.

S&F in repair sink with drainage board made of stainless steel 1.0mm thick 18 guage of Grade SS-304 for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with including fixing cantilever brackets and connecting union to pipe, overall size 1120mm x 457mm bowl size 460 x 330 x 203mm includng waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete all as specified and as directed.

S&F in repair sinks made of stainless steel 18 guage of grade SS-304, kitchen or labortory with plugs, washers and wastes pipe and coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. Note : Minimum weight for 20 mm dia shall not be less than 210gms.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or out going pipe) and to flushing pipe etc. incl trap set in cement concrete complete all as specified and directed.

S & F in repairs PTMT alloy bathroom cabinet with mirror of overall size 300 x 450mm complete all as specified and directed.

Disconnecting existing water tank of capacity exc 250 and not exc 500 litre, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from service tanks and from mouths of circulating pipe etc, and including neatly writting date of cleaning (DD/MM/YY) upto 10 mm thick and upto 100 mm height each bold capital /Itallic letters with white/black synthetic enamel paint complete all as specified and as directed. Note : Cleaning etc shall be included under this item only

Disconnecting existing water tank of capacity exc 500 and not exc 1000 litre, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from service tanks and from mouths of circulating pipe etc, and including neatly writting date of cleaning (DD/MM/YY) upto 10 mm thick and upto 100 mm height each bold capital /Itallic letters with white/black synthetic enamel paint complete all as specified and as directed. Note : Cleaning etc shall be included under this item only

S&F in repair PVC cover for water storage tank of capacity exc 250 ltr but not exc 1000 ltr including driling holes for nut and bolts complete all as specified and directed

S & F in repair straight glass shelf of size upto 30 cmx10 cm with bracket of incl chromium plated brass screws complete all as specified and directed.

S&F in repair 32mm bore (dia of discharge pipe) waste pipe complete all as specified and directed.

Dismantling boarding plywood etc of any description and in any position fixed with nails etc complete all as specified & directed.

S & F 18 mm thick HDHMR (High density high moisture resistant) board one side white laminate and other side decorative as in modular kitchen/ cabinets/door shutter fixed with and incl minifix hardware where ever required including edge band 22 mm wide 0.80 m thick (of pearlwood or equivalent)of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer fixed to wall etc complete all as directed

S & F 8 mm thick HDHMR (High density high moisture resistant ) board of both side white laminate as in back of kitchen cabinets/partion of cupboard etc.complete all as directed

S & F stainless steel handles of size 100 mm fancy type of approved make and fixed complete all as specified & directed. Make : Godrej, Hindware, Lifetime or equivalent

S & F auto close hinges, stainless steel of grade SS-304, bright finish, fancy type and fixed complete all as specified. Make : Godrej, Hindware, Lifetime or equivalent

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3431900)