GE 861 EWS-50/2023-24

Amount

M&L for 2nd class soft wood timber plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brands, secional area exc 13 & n exc 25 sq cm complete all as specified.

4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame, complete all as specified and directed.

4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in walls with nails to timber frame, complete all as specified and directed.

S&F 2nd class soft wood plain fillets bull nosed ,splayed, chamfered or rounded on one edge or face in section of sectional area exc 3 Sqcm and n exc 6 Sqcm complete all as specified and directed.

S&F 2nd class soft wood plain fillets bull nosed ,splayed, chamfered or rounded on one edge or face in section of sectional area n.exc 3 Sqcm complete all as specified.

S&F 2nd class soft wood (Kail) in scantling clean sawn and fixed complete all as specified and directed

Surface excavation n. exc 15 cm deep and getting out in soft soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft soil complete all as specified and directed.

Removing excavated soil n.exc 50mtr and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed.

M&L Cement concrete in foundation, filling and mass concrete type C2 (1:3:6) with 40mm graded aggregate complete all as specified and directed.

M&L steel work in tubular trusses/pole incl special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 complete all as specified and directed.

S&F in Roof trusses (framed) Fe-410W(Gde E-250) quality-A, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mps as in roof covering /cladding to wall, fixed with self tapping screws all as specified and directed.

Hard core of gauge n. exc 63mm depositing, spread and levelled in layers n.exc 15cm thick watering and ramming to true surface with broken stone boulders complete all as specified and directed.

75mm thick PCC 1:3:6 Type C-2 (using 40 mm graded stone aggregate) as in sub-floor, sub-base, floor and pavings, etc., complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

Machine pressed precast conctete interlocking paver block with grey cement and pigment of size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

Cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork, complete all as specified and directed.

S&F for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed. (a) One light point/ Fan point/ Exhaust fan point controlled by one 5A switch.

All as per srl item No 20 here-in-before but for one 3 pin 5A socket outlet on the same board controlled by one switch.

All as per srl item No 20 here-in-before but for one 3 pin 5A socket outlet on independent board controlled by one switch.

All as per item No 20 here-in-before but for 3 pin socket outlet 15 Amps on independent board with 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable.

S&F Modular switch 1 way, 6A, 1 module, 06 Amps single pole, complete all as specified & directed.

S&F Modular switch 1 way, 16A, 1 module, 16 Amps single pole, complete all as specified & directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified & directed.

S&F Modular socket 6/16A, 2/3 pin, 2 module complete all as specified and directed.

S&F Modular White cover plate with frame 3 Module complete all as specified and directed.

S&F Modular White cover plate with frame 4 Module complete all as specified and directed.

S&F Modular White cover plate with frame 6 Module complete all as specified and directed.

S&F Modular White cover plate with frame 8 Module complete all as specified and directed.

S&F of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed.

S&F stepped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified & directed.

S&F wall bracket light 12W LED white/warm colour pressure die- cast aluminium luminarie in powder coated white finish in profile with optimized heat sink for efficient heat dispation and separate replaceable electronic driver, including provision of fixing in ceiling with all items required for fixing all as specified and directed.

S&F decorative ultra slim linear LED 1x20 Watt lighting fixture wall mounted with extruded aluminium heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on and including two nos PVC square box of required size complete all as specified & directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all specified and directed.

S&F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match with existing surfaces complete all as specified and directed.

S&F MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

S&F MCB, SPN (Single Pole Neutral), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm GI suspension wire, one twin core cable flat or circular of size 10 Sqmm.

M&L for Earthing complete with GI steel earth plate electrode 600x600x6mm burried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of earth plate not less than 1.5mtr below normal ground level connected to the Galvanised iron wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised steel all as shown on electrical plate No 3 of MES Sch 2009 Part-I connected to earthing test point and testing on completion with and including necessary excavation and earthwork, earth electrode, earthing lead from electrode to eqpt/sub stn , adequated quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 using 20mm graded black trap/granite/basalt stone aggregate, 40mm thick cover reinforced with 8mm dia bar 4 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20mm bore with funnel and wiremesh and 15mm dia GI light grade earth lead protection pipe up to equipments max length 7.5 mtr complete all as specified and directed by Engr-in-Charge. Note:- On testing after completion if the desired resistenance is not obtained the contrator shall redo the earthing without any extra cost to the department .

M/S BILAL AHMAD BHAT

M/S STARE BUILDERS

M/S SHEIKH FEROOZ AHMAD

M/S MAHIR MUNEER

BHAT CONSTRUCTIONS AND BUILFERS

JANDOO AND CO

M/S AKMAL CONSTRUCTIONS

M/S GEE EMM MIR