PAINTING AND REPAIR WORK OF CHAUDHARY CHARAN SINGH WRESTLING STADIUM, SADARPUR, GHAZIABAD

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR-15.56/2023) Rate 54.65X0.762=41.63

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) (DSR-13.4.1/2023)(DSR 2023, Rate 357.35X0.762=272.30)

Finishing walls with water proofing cement paint of required shade : Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.(DSR-13.109.1/2023)(Rate 75.80X0.762X2=115.52) For Two Coats

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) (DSR 2023 13.81.12023 Rate 62.70X0.762X2=95.56) For Two Coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. (DSR-13.99.1/2023) (RATE 102.80X0.762X2=156.66) For Two Coats

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (DSr-11.41.2/2023) (RATE 1553.45X0.762=1183.72)

P/Laying Interlocking 80mm (Tiles Cement Concrete) Thick Paver Block (RATE 35X17=695+110= 705)(A.R)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore(DSR 2023 18.49.1 Rate 506.80X0.762=386.18)

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore (DSR 2023 18.50.1 Rate 820.70X0.762=625.37)

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6 mm for diagonal braces and central cross piece (DSR 2023 10.5.2 Rate 5563.75x0.762=4239.57)