REPAIR TO CERTAIN STEEL FURNITURE INCLUDING PAINTING AT BABINA CANTT UNDER GE BABINA

Amount

Welding to steel frames of furniture article such as Table dining OR's, Table 3'x3' steel, Table 3'x2' with /without drawer steel, Teapoy Verandah, Table office clk/Offrs steel, Teapoy Verandah (FD/MAP-II/17) Chair CB steel with/without arms, Almirah large/Med steel, locker steel, Locker steel (TD-645), Chair CBA special with hand rest, Chair verandah, Chair verandah (FD/MAP-II/15) Form without back steel, Table 1520x860x760mm, Charpoy IP hard top (FD/MAP-II/01), Chair writing Offrs (MAP) etc. includes fixing of parts in proper position by preparing the old welding surfaces. Welding shall be done through gas welding, the thickness of the metal to be welded n. exc. 16 gauge. length of welding not exc. 25mm at each point complete all as specified and as directed.

Replacement of worn out conduit MS size 25 sq mm 16 gauge wherever required for such as Table dining OR's, Table 3'x3' steel, Table 3'x2' with /without drawer steel, Table office clk/Offrs steel, Chair CBA special with hand rest, Table 1520x860x760mm steel etc and fixing as shown on drg complete all as specified and as directed. Note:- Welding points shall be measured separetly as per ser item No 1 above.

Table dining OR'S (FD-165(M):- TOP : Supply and fixing new top made out of 18/19 mm thick prelaminated particle board exterior grade one side teak shade including first class hard wood (Teak wood) beading 6mm thick shall be provided all around complete as shown on drawing including removal of old top complete all as specified and as directed.

Table dining OR'S (FD-165(M):- Fitting : Hard rubber shoes in black colour suitable for frame as approved shall be provided to the legs complete all as specified and as directed.

Table dining OR'S (FD-165(M):- Painting : Painting to steel structure complete with two coats of synthetic enamel black paint over a coat of primer after preparation of steel surfaces complete all as specified and as directed. Note:- Primer shall be provided where welding has been done as well as new MS conduit is provided.

Table 3'x3' steel (FD-1009):- Top : M&L for removing of unserviceable top and supply & fix new top made of 18/19 mm thick prelaminated particle board exterior grade one side teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table 3'x3' steel (FD-1009):- Fitting : Hard rubber shoes in black colour suitable for frame as approved shall be provided to the legs complete all as specified and as directed.

Table 3'x3' steel (FD-1009):- Painting : Painting to steel structure complete with two coats of synthetic enamel black paint over a coat of primer after preparation of steel surfaces complete all as specified and as directed. Note:- Primer shall be provided where welding has been done as well as new MS conduit is provided.

Table 3'x2' without drawer steel ( FD-1007):- Top : M&L for removing of unserviceable top and supply & fix new top made of 18/19 mm thick prelaminated particle board exterior grade one side teak shade..Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table 3'x2' without drawer steel ( FD-1007):- Fitting : Hard rubber shoes in black colour suitable for frame as approved shall be provided to the legs complete all as specified and as directed.

Table 3'x2' without drawer steel ( FD-1007) : Painting : Painting to steel structure complete with two coats of synthetic enamel black paint over a coat of primer after preparation of steel surfaces complete all as specified and as directed. Note:- Primer shall be provided where welding has been done as well as new MS conduit is provided.

Table 3'x2' with drawer steel ( FD-1008):- Top : M&L for removing of unserviceable top and supply & fix new top of 18/19 mm thick prelaminated particle board exterior grade one side teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table 3'x2' with drawer steel ( FD-1008):- Drawer : Supply and fixing new drawer made out of 0.80mm thick MS sheet alongwith PVC recessed handle complete all as shown on drg.

Table 3'x2' with drawer steel ( FD-1008):- Locks : Supply and fixing lock ISI marked suitable for drawer of approved quality after removing the old one complete all as specified and as directed.

Table 3'x2' with drawer steel ( FD-1008):- Fitting : Hard rubber shoes in black colour suitable for frame as approved shall be provided to the legs complete all as shown on drg.

Table 3'x2' with drawer steel ( FD-1008):- Painting : Painting to steel structure complete with two coats of synthetic enamel black paint internally/externally over a coat of red oxide primer after preparation of steel surfaces. Note:- Primer shall be provided where welding has been done as well as new MS conduit is provided.

Teapoy Varandah (FD-255, 35(M)):- Top : M&L for removing of unserviceable top and supply & fix new top made of 18/19 mm thick prelaminated particle board exterior grade both side white shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Teapoy Varandah (FD-255, 35(M)):- Frame : Supply in replacement of frame made out of angle iron size 20x20x3mm with legs 4 nos, 10 mm dia MS bar made to shape alongwith centre support of size 25x3mm MS flat welded to angle iron frame as shown on drg (FD-35(M) welded to frame duly painted with synthetic enamel paint white over a coat of red oxide primer etc complete all as specified, directed and shown on drawings.

Teapoy Varandah (FD-255, 35(M):- Painting : Painting to steel structure complete with two coats of synthetic enamel white paint over a coat of red oxide primer after preparation of steel surfaces complete all as specified, directed and shown on drawings. Note:-Primer shall be provided where welding has been done.

Table office clerk steel (FD- 84(M) /1004):- Top size 1200 mm x 600mm x 18 mm thick : M&L for removing of unserviceable top and supply & fix new top of 18/19 mm thick prelaminated particle board exterior grade both side teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table office clerk steel (FD- 84(M) /1004):- Top size 1500 mm x 900 mm x 18 mm : M&L for removing of unserviceable top and supply & fix new top of 18/19 mm thick prelaminated particle board exterior grade both side teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table office clerk steel (FD- 84(M) /1004):- Drawer : Supply and fixing new drawer made out of 0.80mm thick MS sheet alongwith PVC recessed handle as shown on drawing.

Table office clerk steel (FD- 84(M) /1004):- Lock of drawer : Supply and fixing of lock ISI marked or as approved in replacement suitable for Table with duplicate keys fixing in position centre locking system complete all as specified, directed and shown on drawings.

Table office clerk steel (FD- 84(M) /1004):- Fitting : Hard rubber shoes in black colour suitable for frame as approved shall be provided to the legscomplete all as specified, directed and shown on drawings.

Table office clerk steel (FD- 84(M) /1004):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel OG internally/externally over a coat of primer after preparation of surfaces complete all as specified, directed and shown on drawings. Note:- Primer shall be provided where welding has been done as well as new MS conduit is provided.

Table office officer steel (FD- 84(M) 1002 & 1003):- Top size 1370 mm x 750 mm x 18 mm : M&L for removing of unserviceable top and supply & fix new top of 18/19 mm thick prelaminated particle board exterior grade both side teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table office officer steel (FD- 84(M) 1002 & 1003):- Top size 1800 mm x 1200 mm x 18 mm : M&L for removing of unserviceable top and supply & fix new top of 18/19 mm thick prelaminated particle board exterior grade both side teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table office officer steel (FD- 84(M) 1002 & 1003):- Drawer : Supply and fixing new drawer made out of 0.80mm thick MS sheet alongwith PVC recessed handle as shown on drg.

Table office officer steel (FD- 84(M) 1002 & 1003):- Lock of drawer : Supply and fixing of lock ISI marked or as approved in replacement suitable for Table with duplicate keys fixing in position centre locking system complete all as specified, directed and shown on drawings.

Table office officer steel (FD- 84(M) 1002 & 1003):- Shutter : S&F in replacement shutter made out of 1.00mm thick MS sheet made to shape as per drg alongwith suitable lock with duplicate keys complete all as specified, directed and shown on drawings.

Table office officer steel (FD- 84(M) 1002 & 1003):- Fitting : Hard rubber shoes in black colour suitable for frame as approved shall be provided to the legs complete all as specified, directed and shown on drawings.

Table office officer steel(FD- 84(M) 1002 & 1003):- Painting : Painting to steel structure complete with two coats of synthetic enamel paint OG internally/externally over a coat of primer after preparation of surfaces complete all as specified, directed and shown on drawings. Note:- Primer shall be provided where welding has been done as well as new MS conduit is provided.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- Seat : S&F of sheesham wood seat frame suitable for chair CB steel tubular with arms woven with 2mm wide cane plastic in true Godrej pattern perferably in teak finish duly sprit polished after taking out the old one as shown on drg.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- Seat : All as per Ser item No 33 here-in-before but for Chair CB steel tubular without arms.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- Back : S&F of sheesham wood back frame suitable for chair CB steel tubular with arms woven with 2mm wide cane plastic in true Godrej pattern perferably in teak finish duly sprit polished after taking out the old one complete all as specified, directed and shown on drawings.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- Back : All as per Ser item No 35 here-in-before but for Chair CB steel tubular without arms.

Chair CB steel W/Arm (FD- 75(M) ):- Arms : Supply and fixing in replacement PVC arms as per sample in teak/black finish.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- FI stiffner of size 25 x 3 mm x 100 mm long : FI stiffner shall be welded with side rails of the chairs to rest seat of Chair CB steel with arms and without arms irrespective of what is shown on drg and as directed.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- PVC Cap : PVC cap suitable for 20 mm dia 1.6mm thick pipe of best quality shall be provided as approved.

Chair CB steel W/Arm /W/O Arms (FD- 75(M) ):- Hard PVC toes with screws : Hard PVC toes of approved quality and to be fixed with screws to the bottom of the chair as shown on drg.

Chair CB steel W/Arm (FD- 75(M) ):- Painting : Painting to Chair CB Steel tubular with arm externally shall be done after preparation of surface with synthetic enamel paint OG complete all as specified and as directed.

Chair CB steel W/O Arms (FD- 75(M) ):- Painting : Painting to Chair CB Steel tubular without arm externally shall be done after preparation of surface with synthetic enamel paint OG complete all as specified and as directed.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Lock : S&F in replacement lock ISI marked having 3 way locking device suitable for Almirah with duplicate keys complete all as specified and as directed.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Locking Device : M & L for repairing locking device and lock bar as required and as directed by Engr-in-Charge.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Door shutter : M & L for adjustment of door shutters by denting as required and directed by Engr-in-Charge.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- CP handle : S&F in replacement C P steel handle ISI marked and to make the locking device in proper function as specified and shown on drg.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Legs : S & F in replacement legs (Foot rest) of 18 gauge MS sheet wherever requied to Almirah Med/small including 1/2H x 1/2S steel made to shape complete all as specified and as directed.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Legs : S & F in replacement legs (Foot rest) of 18 gauge MS sheet wherever requied to Almirah large, glazed including 1/2H x 1/2S steel made to shape complete all as specified and as directed.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Shelf : S&F in replacement Shelf to be made of 1.00 mm thick MS sheet for Almirah large steel, glazed and 1/2H x 1/2 S as per drg and shall be fixed with reveting and suitable MS clamps as approved.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Shelf : S&F in replacement Shelf to be made of 1.00 mm thick MS sheet for Almirah med/small steel and 1/2 H x1/2S as per drg and shall be fixed with reveting and suitable MS clamps complete all as specified and as directed.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Hanging rod : Supply and fixing in replacement conduit pipe steel chromium plated 20mm bore 1.6mm thick with suitable bracket and stapled socket open at one end as approved shall be fixed Almirah large/ Med steel 1/2 H x1/2S as shown on drg complete all as specified and as directed.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Painting : Painting to Almirah large and 1/2H x 1/2S steel, glazed internally & externally after removing the dust /de-rusting of surface by applying putty wherever required, preparartion of surface with two coats of synthetic enamel paint OG /Silver grey as directed by Engr-in-Charge. Note:- Primer shall be provided at places where welding has been carried out and new shelf is provided.

Almirah large/Medium/small/Glazed & 1/2H x1/2S steel (FD- 67(M) FD 1031,1033,1034):- Painting : Painting to Almirah med/small and 1/2H x 1/2S steel internally & externally after removing the dust /de-rusting of surface by applying putty wherever required, preparartion of surface with two coats of synthetic enamel paint OG /Silver grey as directed by Engr-in-Charge. Note:-Primer shall be provided at places where welding has been carried out and new shelf is provided.

Locker bed side Steel (FD-1029):- Hasp & Stapple : Supply and fixing in replacement hasp and staple aluminium ISI marked size 75x40x3mm to shutter complete all as specified and as shown in drawings.

Locker bed side Steel (FD-1029):- CP Socket : Supply and fixing in replacement mild steel chromium plated socket for fixing 19mm dia conduit pipe hanging rod, all as specified and shown on drg.

Locker bed side Steel (FD-1029):- Handle : Supply and fixing in replacement aluminium handles 100mm long ISI Marked as approved complete all as specified and as directed.

Locker bed side Steel (FD-1029) : Hanging rod : Supply and fixing in replacement conduit pipe steel chromium plated 20mm bore 1.6mm thick with suitable bracket and stapled socket open at one end as approved shall be fixed as shown on drg.

Locker bed side Steel (FD-1029):- Shutters : Supply and fixing in replacement shutter of locker steel made of 1mm thick PBI sheet of size and shape as per drg.

Locker bed side Steel (FD-1029):- Legs : Supply and fixing in replacement legs of locker steel fabricated out of 1.00mm thick MS sheet made to shape as per drg.

Locker bed side Steel (FD-1029):- Hinges : Supply and fixing in replacement 75mm long MS hinges ISI Marked to shutter of locker steel including revetting all as directed.

Locker bed side Steel (FD-1029):- Painting : Painting to locker steel internally & externally after removing the dust /de -rusting of surface by applying putty wherever required, preparartion of surface with two coats of synthetic enamel paint OG /Silver grey as directed by Engr-in-Charge. Note:-Primer shall be provided at places where welding has been carried out.

Locker Steel (TD-645):- Lock : S&F in replacement lock ISI marked having 3 way locking device suitable for Locker steel with duplicate keys as approved complete all as specified and as directed.

Locker Steel (TD-645):- Locking Device : M & L for repairing locking device and lock bar as required and complete all as specified and as directed.

Locker Steel (TD-645):- CP Socket : Supply and fixing in replacement mild steel chromium plated socket for fixing 19mm dia conduit pipe hanging rod, all as specified and shown on drg.

Locker Steel (TD-645):- CP handle : S&F in replacement C P steel handle ISI marked and to make the locking device in proper function as specified and shown on drg.

Locker Steel (TD-645):- Drawer : Supply and fixing in replacement drawer of locker steel made of 1mm thick PBI sheet of size and shape as per drg.

Locker Steel (TD-645):- Hanging rod : Supply and fixing in replacement conduit pipe steel chromium plated 20mm bore 1.6mm thick with suitable bracket and stapled socket open at one end as approved shall be fixed as shown on drg.

Locker Steel (TD-645):- Shutters : Supply and fixing in replacement shutter of locker steel made of 1mm thick PBI sheet of size and shape as per drg.

Locker Steel (TD-645):- Legs : Supply and fixing in replacement legs of locker steel fabricated out of 1.00mm thick MS sheet made to shape as per drg.

Locker Steel (TD-645):- Hinges : Supply and fixing in replacement 75mm long MS hinges to shutter of locker steel including revetting all as directed.

Locker Steel (TD-645):- Painting : Painting to locker steel internally & externally after removing the dust /de -rusting of surface by applying putty wherever required, preparartion of surface with two coats of synthetic enamel paint OG /Silver grey as directed by Engr-in-Charge. Note:-Primer shall be provided at places where welding has been carried out.

Chair Excutive/Revolving/Computer, long/short back (TP):- Coaster wheel : Supply and fixing in replacement, PVC caster wheel of Chair superior quality as approved.

Chair Excutive/Revolving/Computer, long/short back (TP):- Adjustment lever : Supply and fixing in replacement, adjustment lever of Chair superior quality as approved.

Chair Excutive/Revolving/Computer, long/short back (TP):- Hydraulic system : Supply and fixing in replacement of hydrolic system components i.e Tilt plate, socker, rod and push spring complete all as specified and as shown in drgs.

Chair Excutive/Revolving/Computer, long/short back (TP):- PVC Arms : Supply and fixing in replacement, PVC arms of Chair superior quality as approved complete all as specified and as shown in drgs.

Chair Excutive/Revolving/Computer, long/short back (TP):- Seat and back cushion : Material and labour for taking out old unserviceable material / tapestry from seat and back and supply and fixing foam 23 density duly covered with tapestry cloth superior quality not less than 350/- per meter as approved. Lining / piping shall be provided all around seat and back.

Chair CBA special with hand rest (FD-120(M)(R)):- Seat : Supply and fixing seat frame as per trade pattern made of well seasoned sheesham wood duly caned in true godrej pattern suitable for chair CBA spl with hand rest. Canning shall be done by cane plastic 2mm thich half round in white colour with frame of 3mm wide cane. Seat frame shall be french polished in teak wood finish and to be fixed to frame with suitable screw steel ISI marked.

Chair CBA special with hand rest (FD-120(M)(R)):- Back : All same as per ser item no 77 above but back for chair CBA spl with hand rest.

Chair CBA special with hand rest (FD-120(M)(R)):- Hand rest : M & L back rest made out of seasoned teak wood free from cracks and knot and other blemishes after removing the old/broken one as per the drg and as directed.

Chair CBA special with hand rest (FD-120(M)(R)):- Fitting : Hard rubber shoes in black colour suitable for frame as approved shall be provided to the legs.

Chair CBA special with hand rest (FD-120(M)(R)): Painting : Painting to steel structure complete with two coats of synthetic enamel paint OG over a coat of primer after preparation of surfaces complete all as specified and as shown in drgs. Note:- Primer shall be provided where welding has been done.

Chair Verandah (FD-256):- Caning : Removing of unserviceable/torn out plastic cane from Chair Verandah and recanning the same with new white cane 4mm wide and 0.4mm thick half round oval shape as approved by Engr-In-Charge. Weaving shall be mat pattern or as directed by Engr-in-Charge.

Chair Verandah (FD-256):- Hard PVC Shoes : Supply and fixing in replacement, hard PVC shoes superior quality as approved for chair verandah.

Chair Verandah (FD-256):- Painting : Painting to steel structure complete with two coats of paint synthetic enamel white over a coat of primer after preparation of surface. Primer shall be provided where welding has been done.

Form without back steel frame (FD-77/97):- Seat Plank : M&L for replacement of seat plank as per drg complete all as specified and directed.

Form without back steel frame (FD-77/97):- Fitting : Hard rubber shoes in black colour suitable for frame as approved shall be provided to the legs.

Form without back steel frame (FD-77/97/similar pattern):- Painting : Painting to steel structure complete with two coats of synthetic enamel paint Olive green over a coat of primer after preparation of surfaces. Note:-Primer shall be provided where welding has been done.

Trestle SR Iron/Steel (FD- 86 M/ similar pattern):- Painting : M&L for removal of existing worn out painting from inside & outside including preparation of surface of frame complete and M&L for applying two coats synthetic enamel paint black over a coat of red oxide primer, complete all as specified, directed and shown on drgs.

Table 1520x860x760mm steel (FD-1010, FD-1012, FD-1013, FD-1011, FD-1009, similar pattern):- TOP : M&L for removing of unserviceable top and supply & fix new top of18/19 mm thick prelaminated particle board exterior grade both side teak shade. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Table 1520x860x760mm steel (FD-1010, FD-1012, FD-1013, FD-1011, FD-1009, similar pattern):- Fitting : Hard rubber shoes in black colour suitable for frame as approved shall be provided to the legs.

Table 1520x860x760mm steel (FD-1010, FD-1012FD-1013FD-1011FD-1009, similar pattern):- Painting : Painting to steel structure complete with two coats of synthetic enamel paint Olive green over a coat of primer after preparation of surface. Note:-Primer shall be provided where welding has been done as well as new conduit MS is provided.

Chair Verandah (FD/MAP-II/15) : Seat & Back : S & F in repalcement PVC seat and back 4mm thick to Chair verandah after removing old/broken. Weight of seat and back of Chair/verandah shall not be less than 1.85Kgs each. Make of seat & back of Chair Verandah shall be made of AMKO/CELLO/MILTON as approved shall be fixed as shown on drg.

Chair Verandah (FD/MAP-II/15) : Stiffener : S & F in replacement new stiffener made out of 19mm dia 1.6 mm wall thickness MS conduit pipe to the centre of seat to chair verandah all as directed.

Chair Verandah (FD/MAP-II/15) : Hard PVC Shoes : S & F in replacement, hard PVC shoes superior quality as approved shall be fixed to the leg.

Chair Verandah (FD/MAP-II/15) : Painting : Painting to steel structure Complete with two coats of synthetic enamel paint white over a coat of primer after preparation of surface. Note:-Primer shall be provided where welding has been done.

Teapoy Verandah (FD/MAP-II/17) : Top : M&L for removing of unserviceable top and supply & fix new top one side melamine faced pre laminated MDF board 18mm thick. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Teapoy Verandah (FD/MAP-II/17) :Painting : Painting to steel structure complete with two coats of synthetic enamel paint white over a coat of primer after preparation of surface. Note:-Primer shall be provided where welding has been done.

Charpoy IP hard top (FD/MAP-II/01) : Plywood :--S&F 12mm thick plywood BWR Grade IS 303, approved quality in single piece as per drawing without any joint to the charpoy frame with suitable screws wood/steel with cup washer including removal of damaged plywood all as specified on drawing or as directed by Engineer-in-charge.

Charpoy IP hard top (FD/MAP-II/01) : Painting :-- Painting to steel structure complete with two coats of synthetic enamel paint black over a coat of primer after preparation of surface. Note:-Primer shall be provided where welding has been done as well as new conduit MS is provided.

Charpoy MS Tube (TP) : Plywood :- S&F 12mm thick plywood BWR Grade IS 303, approved quality in single piece as per drawing without any joint to the charpoy frame with suitable screws wood/steel with cup washer including removal of damaged ply wood all as specified on drawing or as directed by Engineer-in-charge.

Charpoy MS Tube (TP) : Painting :- Painting to steel structure complete with two coats of synthetic enamel paint black over a coat of primer after preparation of surface. Note:-Primer shall be provided where welding has been done as well as new conduit MS is provided.

CHARPOY GI PIPE PLYTOP (FD-220): Plywood :- M & L for removing of old unserviceable plywood from charpoy GI pipe plytop including material & labour for replacement of unserviceable/broken plywood from Charpoy GI Pipe plywood top by providing plywood 12 mm thick BWR Grade of approved quality in single piece as per drawing without any joint to the frame of charpoy GI Pipe ply top with suitable carriage bolts with nut and washer . Edges of the plywood shall be rounded and smoothed by applying emery paper. Frame of charpoy shall be fully screwed /replaced the unserviceable parts before fixing the ply top . Rest as directed by Engineer-in-charge.

CHARPOY GI PIPE PLYTOP (FD-220) :- MS Flat iron : M & L for removing of old unserviceable MS cleat/flat iron from charpoy GI pipe plytop and S & F in replacement of unserviceable/broken MS cleat flat iron from Charpoy GI plywood top by providing two nos MS flat iron size 900x40x5mm fixed with four nos carriage bolts with nuts and washer to the both side of long rails so that plywood shall be fixed on the top of charpoy frame with total 08 Nos carriage bolts with nut and washer including flat iron bolt, 50mm long and 6mm dia by providing suitable holes in the GI pipe . Frame of charpoy shall be fully screwed /replaced the unserviceable parts before fixing the ply top . Rest as directed by Engineer-in-charge.

CHARPOY GI PIPE PLYTOP (FD-220) : Long rail : Re- threading and fixing with elbow after removing and cutting the long rail wherever required all as shown on drg and as directed . Threading shall be done 22 mm long at one end and 52 mm long at other side and re-assembling of GI charpoy as per drg and as directed by Engr-in-charge.

CHARPOY GI PIPE PLYTOP (FD-220) : Short rail : Re- threading and fixing with elbow after removing and cutting the short rail wherever required all as shown on drg and as directed . Threading shall be done 22mm long at each side and re-assembling of GI charpoy as per drg and as directed by Engr-in-charge.

CHARPOY GI PIPE PLYTOP (FD-220) : Leg : Re- threading and fixing with elbow after removing and cutting the leg wherever required all as shown on drg and as directed . Threading shall be done 22 mm long at one end and re-assembling of GI charpoy as per drg and as directed by Engr-in-charge

CHARPOY GI PIPE PLYTOP (FD-220) : Replacement of long rail of charpoys GI pipe wherever required with new long rail made out of 32mm dia GI pipe med grade confirming to IS :1239 Part-I of length 1980 mm duly threaded one side upto 22mm long at end and other side to 52mm long at end and re-assembling of GI charpoys after replacement of UNSV long rail as directed by Engr-in-Charge. Note :- 1. The items includes threading both sides in new long rail also. 2. Old unserviceable long rail obtained shall be reused in Item No 108 below.

CHARPOY GI PIPE PLYTOP (FD-220) : Converting long rail into short rail (Obtain from item Sl No 107 above) here-in-before and fixed to Charpoy GI pipe duly threaded 22mm long both side end as directed by Engr-in-Charge.

CHARPOY GI PIPE PLYTOP (FD-220) : Converting short rail into leg (obtain from Sl No 108) here-in-before and fixed complete to Charpoy GI pipe duly threaded 22mm long of the leg as directed by Engr-in-Charge.

CHARPOY GI PIPE PLYTOP (FD-220) : Elbow : M & L for replacement of GI elbow three way of size 32mm bore with new ISI mark GI elbow (wt not less than 420 gms each) & re-assembling of GI charpoys after replacement of broken elbow complete all as specified and directed by Engr-in-Charge.

CHARPOY GI PIPE PLYTOP (FD-220) : Check Nut: M & L for replacement of broken GI check nuts of size 32mm bore with new check nuts of approved quality complete all as specifed and directed by Engr-in-Charge.

CHARPOY GI PIPE PLYTOP(FD-220) : MS sheet :M & L for replacement of 3mm thick MS sheet by welding to bottom of GI legs as directed by Engr-in-Charge.

CHARPOY GI PIPE (FD-220) : MS Clamp : M & L for replacement of broken MS clamps FI 25mmx3mm to shape & welded with legs duly painted with black paint all as directed.

Chair Writing Offrs (FD/E6/MAP/12) : Seat : M & L for repalcement of broken seat of Chair Writing Offrs by S & F new seat as per drg and as directed by Engr-in-Charge.

Chair Writing Offrs (FD/E6/MAP/12) : FI Stiffener : M & L for replacement of broken FI stiffner shall be welded with side rails of the chairs to rest seat to the Chair Writing Offrs as per drg and as directed by Engr-in-Charge.

Chair Writing Offrs (FD/E6/MAP/12) Back : M & L for repalcement of broken back of Chair Writing Offrs as per drg and as directed by Engr-in-Charge.

Chair Writing Offrs (FD/E6/MAP/12) Arm : M & L for repalcement of broken arm of Chair Writing Offrs as per drg and as directed by Engr-in-Charge.

Chair Writing Offrs (FD/E6/MAP/12) : Painting : Painting to steel structure complete with two coats of paint synthetic enamel paint black over a coat of primer after preparation of surface. Note:-Primer shall be provided where welding has been done as well as new conduit MS is provided.

Chair school with hand board : (FD/E6/MAP/05) : Hand Board : M&L for removing of unserviceable hand board and supply & fix new hand board made of 18/19 mm thick prelaminated particle board exterior grade both side teak shade as per drawing. Teak wood beading 6mm thick shall be provided all around complete all as specified, directed and shown on drawings.

Chair school with hand board : (FD/E6/MAP/05) : Painting : Painting to steel structure complete with two coats of paint synthetic enamel paint black over a coat of primer after preparation of surface.Primer shall be provided where welding has been done as well as new conduit MS is provided.

Charpoy folding with hard top : ( FD-388(R)) : Plywood : M&L for removing of unserviceable plywood in two cut pieces and suppy & fix 12mm thick two cut piece BWR ply wood of Overall size 1980mm long 900mm wide 400mm high for smooth function of folding complete all as specified and as shown in drgs.

Charpoy folding with hard top : ( FD-388(R)) : Painting to steel structure complete with two coats of synthetic enamel paint black over a coat of primer after preparation of surface complete all as specified and as shown in drgs. Note:-Primer shall be provided where welding has been done as well as new conduit MS is provided.

Locker steel double door : (TP) : Painting to Locker steel double door(TP) internally & externally after removing the dust /de-rusting of surface by applying putty wherever required, preparartion of surface with two coats of paint synthetic enamel paint magic blue as directed by Engr-in-Charge. Note:-Primer shall be provided at places where welding has been carried out and new shelf is provided.

M/S chandra enterprises

ROHIT ENTERPRISES