W/S of Lumbini Duddhi HN (135A) ke km 225 se lapari atarauara kharjura baraiyakaji meerapur hote huye mubarakpur road

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m.(Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. (Compaction Only) (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Construction of embankment with approved material obtained from right of way with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.

Providing and laying dense graded bituminous macadam Grade-2 with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 4.50 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per Morth specification clause No. 505 complete in all respects. (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Providing and applying tack coat-2 with bitumen (VG-10) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Providing and laying bituminous macadam Grade-2 with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing.

Construction of sub-grade and earthen shoulders with approved material obtained from right of way with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Reinforced cement concrete M-15 grade Kilometer stone of standard design as per IRC:8-1980, fixing in position including including painting and printing etc.

Reinforced cement concrete M-15 grade Hectometer stone (precast) of standard design as per IRC:8-1980, fixing in position including including painting and printing etc.

Reinforced Cement Concrete (M-20) in open foundation complete as per drawing and technical Specification .(Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Plain Cement Concrete 1:4:8 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days foundation.(Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

1st class brick work with M-15 brick with cement & fine sand of 1.25FM. in 1:4 S.I.No 305B. (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Struck Cement Pointing with cement mortar 1:2 S.I. No 574(Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

RCC Hume Pipe NP-3 (450mm) including collars/spigot jointed with stiff mixture of cement in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints. (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

RCC Hume Pipe NP-3 (600mm) including collars/spigot jointed with stiff mixture of cement in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints. (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

RCC Hume Pipe NP-3 (900mm) including collars/spigot jointed with stiff mixture of cement in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints. (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MORTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. As per MORTH Sr.No. 13.10 and 710.1.4.of IRC:78 and 2200 (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Plain cement concrete 1:3:6 with crushed stone nominal mix in foundation aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curring for 14 days.(Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

RCC Grade M-30 using batching plant transit mixer & manual placing as per MORTH SI. No. 12.9 Case-II and specification No.1500, 1700, 2100 (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Supplying, fitting and placing HYSD reinforcement complete in sub-structure drawing as per and Technical Specification As per MORTH Sr.No. 12.40 and Specification No. 1600 (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Plain cement concrete in open foundation complete and as per drawing technical specifications. (M-15) As per MORTH Sr.No. 12.8 and Specification No. 1500, 1700 & 1800 (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Providing weep holes in Brick masonry /plain /Reinforced concrete abutment, wing wall/ return wall with 100mm dia AC pipe extending through the full width of the structure with slope of 1V:20H towards drawing foce. Complete as per drawing and technical specificationsl No. 2706 & 2200 .(Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Road Marking with Hot Applied Thermoplastic Compund with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compund 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes. Morth-803 (8.13) (including all taxes, labour cess etc but excluding GST.)

Providing and laying of hot applied thermoplastic compound 5mm thick including refectorising glass beads@500 gms per sqm area.thickness of 5mm is excludive of surface applied glass beads as per IRC-35-2015 the finished surface to be level, uniform and free from streaks and holes. Morth-803 (8.13) base (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Supplying and Instalation of Delinators (road way indicators, hazard markers, object marker) 80-100cm, high above ground level, painted black and white in 15cm, wide strips, fitted with 80x100 mm rectangular or 75mm dia circular reflectorised panel at the top buried or pressed into the ground and conforming to IRC:79 and the drawing. (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. The retro-reflective sheeting shall be tested for 3 years out door weathering test in indian conditions as per IRC 67:2012 and proff of the same in the form of government report shall be uploded while quooating tender. 90cm high Octangon (On Village link roads- for Stop Sign Caution Board) (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) (School Board 60cm equilateral tringle). (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) (Village Board 80x60cm) (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) (Speed Limit Board 60cm Circular) (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) (Hazard Board 30x90cm). (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Providing and erecting 6.0m Span cantilever overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans & as per IRC :67 (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

Direction and Place Identification signs with size more tha 0.9 sqm size board. (Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting . Sheet fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm. (Including Cost of All Material T&P, Royalty, Taxes, Labour Cess etc but Excluding GST)

PART B Maintainance cost :- Maintainance cost will be paid year wise as per Government order No.17/2024/SA.-113/23-1-2024-23-1099/113/2023 Date 16.01.2024 and HQ UPPWD ,Lucknow order No. 3689COPRMC/Mul-23-24 Date 17-02-2024 Maintainance cost will adjusted as per final cost of construction and will be paid accordingly.

The routine maintenance of above road work including pavement, road sides and cross drains, surface drains to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the Completion Date and ends after five years. For 1st Year Maintenance charge @ 0% of Sub toal of Part-A work done (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )

The routine maintenance of above road work including pavement, road sides and cross drains, surface drains to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the Completion Date and ends after five years. For 2nd Year Maintenance charge @ 0.25% (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )

The routine maintenance of above road work including pavement, road sides and cross drains, surface drains to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the Completion Date and ends after five years. For 3rd Year Maintenance charge @ 0.50% (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )

The routine maintenance of above road work including pavement, road sides and cross drains, surface drains to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the Completion Date and ends after five years. For 4th Year Maintenance charge @ 0.75% (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )

The routine maintenance of above road work including pavement, road sides and cross drains, surface drains to the required standards and in the manner as defined in CB Condition and keep the entire road surface and structure in Defect free condition during the entire maintenance period which begins from the Completion Date and ends after five years. For 5th Year Maintenance charge @ 1.00% (Including Cost of All Matarial T&P, Taxes, Labour Cess etc but Excluding GST )