REPAIR AND MAINT OF INTERNAL WIRING AND ELECT SUPPLY SYSTEM INCLUDING MAINT OF SUMMER APPLIANCES AT AIR FORCE STATION DALHOUSIE UNDER GE (AIR FORCE) PATHANKOT

Amount

Repair, maint and making the continuity of supply after rectifying the defects of the electrical items such as tube light fittings,switches, replacement of fuse wires, distribution boards, MCB (light/power), lamp holders (bracket/ pandents/ batten), bell/buzzer, push button, ceiling rose, capacitors and other similar electrical items/fittings etc. including provisioning of small pieces of electrical wire of size 1 sqmm to 10 sqmm single core and length not exceeding 0.50 mtrs complete all as specified and directed by Engineer-in-Charge (Note : - (i) any accessories found unserviceable that shall be replaced under respective items of this Sch. (ii) If complaint not completed within the same day then Rs 100/- of penalty will be recovered for per compalint/per day

Supply and fixing in replacement of LED lamp 05 to 15 watt watts 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of LED tube light double connection retrofit 20/22 watt 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of LED tube light double connection retrofit 16/18 watt 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement lamp holder suitable for LED lamp of 5 to 10 watts as per site requirement complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement bell electric Ding Dong type 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and fixing Switch piano flush button type single pole one/Two way/Bell push 5 amps 240 volts complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement, for socket outlet 2 in 1, 5 pin, 5 Amps flush type complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement, for switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement, socket outlet 2 in 1, 3 pin, 5 & 15 A multi purpose flush type 240 V white finish complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement switch socket combination, 5 amps 5 pin flush type, 230 volts.white finish complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement switch socket combination, 5 and 15 amps multi purpose 5 in 1 flush type, 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and fixing switch Piano modular type, 6 Amp, one way complete all as specified and directed by Engr-in-Charge.

Supply and fixing switch Piano modular type, 16 Amp, one way complete all as specified and directed by Engr-in-Charge.

Supply and fixing bell push Piano modular type, 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and fixing socket outlet modular type, 2/3 pin, 6 Amps, 230 volts, complete all as specified and directed by Engr-in-Charge.

Supply and fixing socket outlet modular type but 2/3 pin, 6/16 Amps, 230 volts, complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Ceiling rose, surface backlite, 65 x 20 mm three terminal ISI Marked complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement spring loaded rotary type bipin holder suitable for tube light fittings all as required at site complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement plastic laminated top sheet cover 3 mm thick of size 5"x5" all as required at site including drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement plastic laminated top sheet cover 3 mm thick of size 8"x5" all as required at site including drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement plastic laminated top sheet cover 3 mm thick of size 11"x9" all as required at including drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement plastic laminated top sheet cover 3 mm thick of size 13"x11" all as required at site including drilling holes for fixing screws and providing 4 Nos screws with washers for fixing the sheet to sunken box /wooden box complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of PVC rectangular switch Board for mounting switches, sockets etc with 3mm thick plastic laminated sheet cover of size 100mmx100mm and 50mm deep , 240 volt. complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of PVC rectangular switch Board for mounting switches, sockets etc with 3mm thick plastic laminated sheet cover of size 175mmx100mm and 50mm deep , 240 volt complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of PVC rectangular switch Board for mounting switches, sockets etc with 3mm thick plastic laminated sheet cover of size 200mmx150mm and 50mm deep , 240 volt complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of PVC rectangular switch Board for mounting switches, sockets etc with 3mm thick plastic laminated sheet cover of size 250mmx200mm and 50mm deep , 240 volt complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of PVC rectangular switch Board for mounting switches, sockets etc with 3mm thick plastic laminated sheet cover of size 350mmx300mm and 50mm deep , 240 volt complete all as specified and directed by Engr-in-Charge.

M & L for servicing of exhaust fan Upto 300 mm sweep with painting and rewinding, change of bearing if defected, louvered/shutters including taking down and refixing after satisfactory repaired complete all as specified and directed by Engr-in-Charge.

M & L for servicing of exhaust fan above 300mm and upto 450mm sweep with painting and rewinding, change of bearing if defect, louvered complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement capacitor 3.15/4 mfd 240 volts for fans make Epcos complete all as specified and directed by Engr-in-Charge.

Taking down and refixing/relocation of exising tube light fitting, wall bracket or bulkhead fitting including connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED bulk head fitting Plastic Body , heat resistant, with specially designed gasket in and including LED lamp 10 watt complete all as specified and directed by Engr-in-Charge.

Supply and fixing building security light fitting of new generation energy saving and environmental friendly long life versatile pressure die cast aluminium housing IP66 LED lumanaire with high power LED 25 watt as light source with toughned glass complete all as specified and directed by Engr-in-Charge.

Bracket made out of GI pipe 25mm dia medium grade, 0.9 mtr long bent to shape with welded MS flat 25 x 6 mm for mounting of fitting & MS flat iron clamps made out of 25mmX 6mm thick FI nuts, bolts including taking down old unsv complete all as directed by Engr-in-charge.

Supply and fixing in replacement LED tube light fitting, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver of 20/22watt (4') in and including 20/22 watt LED tube rod complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core complete all as specified and directed by Engr-in-Charge.

All as per srl item No 36 above but 12 watt (2') complete all as specified and directed by Engr-in-Charge.

Supply and fixining ultra mordern recess mounting flat panel luminaires (2'x2'), 34 Watt LED,6000k with seprate electronic driver & high brightness SMD LEDs including lamp and complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement energy saving flood light luminaire high power COB LED as light source with protection IP65 of 50watt LED complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing Electronic Meter 10-60 amps Single phase tamper proof with Class 1 accuracy Optical port,LED Indication for earth leakage ,Elegant Polycarbonate Enclosure, anti tamper features, Electromagnetic compatible & 6 digit Display complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair/replacement voltage surge protector, 230/240 volts AC, 1.4 KV protection level type II with indicator double pole (two modules) with rupturing cacpacity 40 KA including makeing connection and providing thimble for out going cables and enclosure complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement indirect up-down light suitable for mirror and as wall light application of 8/10watt in and including 8/10 watt LED with all complete fixing accessories and arrangement as required at site complete all as specified and directed by Engr-in-charge.

M&L for testing of old earthing using calibrated earth tester & submitting result to engr -in -charge. Earthing which showing much more results as specified in IS rule and disconnetivity should be replaced with new earthing items are considered as below complete all as specified and directed by Engr-in-Charge. Note : (i) Watering of earthing with 2 Buckets (30Ltrs) water mixed with salt (total 5 Kg) shall be carried out one day before the testing & the cost of the same shall deemed included in unit rate quoted.

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Peris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash complete all as specified and directed by Engr-in-Charge.

Taking down main switch/DB/ changeover/AC box of any capacity including fixing accessories of single/three phase complete all as specified and directed by Engr-in-Charge.

Taking down old/unserviceable aluminium/copper submain wiring off sizes complete all as specified and directed by Engr-in-Charge.

Concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 0.75 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following:- (a) One light, fan, call bell, 5 Amp independent socket point controlled by one switch.

(b) One socket point controlled by one switch on same board complete all as specified and directed by Engr-in-Charge.

All as per item No 47 above but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed by Engr-in-Charge.

All as per item Srl No 47 above but point wiring in surface with casing & caping complete all as specified and directed by Engineer-in-Charge for the following:- (a) One light, fan, call bell point, 5 Amp independent socket point controlled by one switch.

One socket point controlled by one switch on same board complete all as specified and directed by Engr-in-Charge.

All as per item No 59 here-in-before above but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement sheet metal enclosure , 32A single pole and neutral with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 20 Amp fixed properly complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement sheet metal enclosure VTPN MCCB DB 4way, 415 V (vertical type) with bus bar double door type IP 43 - IK 09 for DB including MCBs & MCCB 100 Amps (as incomer) to be used, fixed properly on / in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires all as directed complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement double door metallic sheet metal enclosure for DB when MCBs to be used TPNL, 4 ways, 415Volts (horizontal type) with 200 Amps rated bus bar suitable for TPN MCB/ 4 pole Isolator fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed by Engr-in-Charge.

All as pe ritem No 54 above but 4 way complete all as specified and directed by Engr-in-Charge.

All as pe ritem No 54 above but 2 way without busbar complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement MCB SP 240 volt 6 Amp to 32 Amps 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed by Engr-in-Charge.

All as pe ritem No 57 here-in-before above but SP 40-63 Amps complete all as specified and directed by Engr-in-Charge.

All as pe ritem No 57 here-in-before above but SPN 16-40 Amps complete all as specified and directed by Engr-in-Charge.

All as pe ritem No 57 here-in-before above but SPN 40-63 Amps complete all as specified and directed by Engr-in-Charge.

All as pe ritem No 57 here-in-before above but TP 40-63 A 415 V complete all as specified and directed by Engr-in-Charge.

All as pe ritem No 57 here-in-before above but TPN 40-63 Amps complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement heavy duty exhaust fan AC single phase 230/240 V of size 300 mm sweep 1400 RPM with louver & shutter including necessary grouting on wall complete and making good the wall surface after fixing of exhaust fan complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement MCCB 100 Amps, 3 Pole, 415V, 25 KA, fixed type complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement MCCB 125 Amps, 3 Pole, 415V, 25 KA, fixed type complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement MCCB 160 Amps, 3 Pole, 415V, 36 KA, thermal, magnetic adjustable type complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement MCCB 200 Amps, 3 Pole, 415V, 36 KA, thermal, magnetic adjustable type complete all as specified and directed by Engr-in-Charge.

Sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn in new/exisitng MS/PVC conduit with 1.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete excluding rigid PVC conduit complete all as specified and directed by Engr-in-Charge.

Sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in new/existing MS/PVC conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all as specified and directed by Engr-in-Charge.

Sub main wiring with four single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in new/existing PVC conduit with one run of 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all as specified and directed by Engr-in-Charge. Note for item No 68 to 70: New PVC Conduit & cutting chasing will be measured and paid separately under relevent item here-in-after all as specified and directed by the Engr-in-charge.

Rigid metallic medium 20mm dia PVC conduit ISI marked in concealed position inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed properly in concealed or surface position for laying of submain wiring or telephone wire etc all as specified and directed by Engineer-in-Charge

All as per item No. 89 above but metallic medium 25 mm dia PVC conduit ISI marked complete all as specified and directed by Engr-in-Charge.

Cutting chases in brick walls, pinning in at the depth of 10cm, making good to facings where required and pointing in cement mortar 1:3 cutting chases for concealed conduit wiring and making good and palstering the surface with cement or plaster of peris and matching with same colour scheme, cutting not exceeding 10cm girth all as specified and directed by the Engr-in-charge.

M&L for fixing Boxes junctions, plastic, round four terminals in existing/new PVC conduit fitting complete all as specified and directed by the Engr-in-charge.

M & L for flameproof concealed point wiring on wall and surface wiring on ceiling / roof with necessary fixing arrangements with stranded PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including 16 gauge stove enameled ERW rigid steel conduit (metallic) not less than 19 mm dia with all MS conduit accessories/ fittings such as, bends, tee, elbow excluding junction boxes etc including PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for one light, fan point controlled by one switch.

All as per item No 75 above but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement 16 Amp flame proof weather proof switch Socket and plug combined in LM 6 cable termination box, 250 V, 2P + Earth complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement flame proof weather proof threaded type junction box LM 6 aluminium alloy complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement flame proof weather proof metallic hose conduit 3/4 " dia 300 mm long complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement flameproof double compression brass cable gland 3/4" dia complete with nipples all as specified and directed by the Engr-in-charge.

Supply and fixing in replacement Flame proof weather proof switch with cable termination in LM 6 cable termination box aluminium alloy housing 16 Amp, single pole 250 volts complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement Fluorescent tube light fitting, 1x36 watt flameproof type FLP-WP IP-65 made of aluminium alloy LM6 with electronic ballast, bipen holders, connector block etc complete with all accessories prewired and includidnt connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement energy efficient flame froof , heavy duty high speed exhaust fan 380 mm (15") sweep, with louver shutter, matel body rust proof inbuilt safety grill, single phase 230 volts 50 Hz AC, totally enclosed heavy duty motor with die cast alumn rotor mounted on two ball bearings complete with louvers & shutters,, including making circular holes suitable for fixing of 380mm sweep exhaust fans by cutting the wall any thickness/ required circumstances for exhaust of air and including grouting of rag bolts and nuts complete including finishing of disturbed surfaces by using cement mortar 1:3 complete and connecting electrically using 3 core 0.75sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site complete all as specified and directed by Engr-in-Charge.

Supply and fixing 5 Watt LED torch with high intensity focused beam with twin switching mode complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement 9 Watt, 6500 K LED round/oval slim compact aluminium die cast edge lit panel suitable for recess mounting round fixture with Opal diffuser and separate electronic driver complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement LED panel drivers suitable for 9/12/15/18/36 watt recessed mounting luminaries with universal connectors complete all as specified and directed by Engr-in-charge.

Disconnecting the Split type Air conditioner cap 1.5/2 Ton from Outer unit and repair the followings as required on site complete all as specified and directed by Engr-in-charge.:- (a) Servicing the Split type AC cap 1.5/2 Ton, Cleaning of condenser coil unit from Stand and inner unit all as specified and directed by the Engr-in-charge.

(b) Vacuum the compressor unit and testing of leakage and charging Gas of F-22 and topup the Gas F-22 complete all as specified and directed by Engr-in-charge.

(c) Replacement of capacitor 45 mfd complete all as specified and directed by Engr-in-charge.

(d) Replacement of filter dryer complete all as specified and directed by Engr-in-charge.

(e) Replacement of sealed Comppresser Unit as per existing make as per sample complete all as specified and directed by Engr-in-charge.

(f) Taking out the defective eletronic circuit board or PCB unit indoor unit of split type AC and supply and fix eletronic circuit board for split AC of capacity 1.5 /2TR of any exixting make and model or as per required at site complete all as specified and directed by Engr-in-charge.

(g) Taking only burnt/unserviceable blower motor and replace the same with new (Company sealed) blower motor as per exiting size, specification and Make suitable for AC of capacity 1.5/2 Ton of any make and model as applicable and connectnig up complete all as specified and directed by Engr-in-charge.

(h) Taking out unserviceable evaporator coil and replace the same with new (company sealed) evaporator coil as per size, secification and make suitable for Ac of 1.5/2 ton of any make & model as applicable and connecting up all system with and including charging of refrigment (F-22) and testing all complete all as specified and directed by Engr-in-charge.

(j) Taking out unserviceable condenser coil and replace the same with new(company new) condenser coil as per exiting size, secification and make suitable for Ac of 1.5/2 ton of any make as applicable and up all the system eith and including charging of refrigrant (F-22) and testing complete all as specified and directed by Engr-in-charge.

Disconnecting the Deep freezer cap 210/300 Ltr and refrigerator cap 165 to 310 Ltrs and repair the followings as required on site & as directed by Eng-in-charge :- (a) Servicing the Refrigerator ,Deep freezer, Cleaning of condenser coil unit from Stand and inner unit complete all as specified and directed by the Engr-in-charge.

(b) Taking out unserviceable condenser coil and replace the same with new(company new) condenser coil as per exiting size, secification and make suitable for refrigerator of capacity 180/310 ltrs of any make as applicable with and including charging of refrigerant gas (F-12) and testing complete to the satisfaction of the Engr-in-Charge.

(c) Vacuum the compressor unit and testing of leakage and charging Gas (F-12) complete all as specified and directed by Engr-in-charge.

(d) Replacement of capacitor or starting relay as suitable for existing capacity complete all as specified and directed by Engr-in-charge.

(e) Replacement of filter dryer pencil of any size complete all as specified and directed by Engr-in-charge.

(f) Replacement of cooling fan with electric motor complete all as specified and directed by Engr-in-charge.

(g) S&F in replacement of compressor(sealed unit) as per existing size specification and make suitable for refrigerator of capacity 180/310 ltrs of any make as applicable and connecting up all the system with and including Relay & OLP and Re- gas charging of refrigerant and testing complete all as specified and directed by Engr-in-charge.

(h) All as per items No 2 (g) here in before but for refrigerator of capacity 310 ltrs of any make complete all as specified and directed by Engr-in-charge.

Replacement of defective componants /accessories suitable for refrigerator of capacity 165 ltrs to 310 ltrs of any model and make as applicable and testing complete as directed by the Engr-in-Charge (a) Freezer complete with freezer door braket suitable for refrigerator of capacity 165 ltrs.

(b) All as per items No 3 (a) above but suitable for 280 / 310 ltrs complete all as specified and directed by Engr-in-charge.

(c) Ice tray PVC / Plastic for all models complete all as specified and directed by Engr-in-charge.

(d) Chiller tray suitable for refrigerator of capacity 165 litrs complete all as specified and directed by Engr-in-charge.

(e) Thermostat control switch complete with knob and box suitable for refrigerator of capacity 165 ltrs to 310 ltrs as approved complete all as specified and directed by Engr-in-charge.

(f) Table top for refrigerator suiatable for as per exiting size and colour complete all as specified and directed by Engr-in-charge.

Replacment of unserviceable components/ parts such as power circuit board (PCB), time relay, socket outlet, regualtor /toggle switch,Voltmetre , Indicator lamp, circuit wiring fuse unit etc including rewinding of transfarmor &painting voltage stablizer extamally with two coats of synthetic enamal paint after preparation of old painted steel surface and testing all complete for stablizer up to 10 KVA capacity complete all as specified and directed by Engr-in-charge.

Supply only Heigh Strength Calsium based granualar chlorination chemical containing approprate qty of dispersants / corrision inhibitors to prevent encrustation / scalling in distribution system. Thebrand & make of chlorination chemical must be stated and certified by All India Institute of Hygine & Public Health (Govt. of India), conferming compliance to all the above specifications with a declaration from the Laboratory that from the Technical strength, stability, health, safety, and operational point of view, as well as the fact that this product is used for drinking water applications for consumption by humans, the brand and make of calsium based granular chlorination chemical is suitable for drinking wayer chlorination and is recommended for use. the report must indicate that the sample has been drawn by All india Institute of Hygine & Public Health. (Drum of 45 Kgs) complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement heating element any type 1.5/2.0 KW 240 Volts, ISI marked for water heater storage type complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement thermostat switch 0 to 100°C , 240 volts suitable for water heater storage type any makecomplete all as specified and directed by Engr-in-charge.

Syphon assy any type for water heater storage type upto 25/50 ltr cap complete all as specified and directed by Engr-in-charge.

Inner copper tank any cap for water heater storage type upto 25/50 ltr cap all as specified and directed by the Engr-in-charge.

Supply and replacement outer body suitable for 25/50 ltr geyser made out of MS sheet factory made complete with fixing bracket matching with existing all as specified and directed by the Engr-in-charge.

Supply and replace glass wool of 25/50 ltrs capacity geyser complete all as specified and directed by the Engr-in-charge.

Supply and replace indicator lamp round/square type suitable for geyser 25/50 ltr all as per sample AC 230 Volt complete all as specified and directed by Engr-in-charge.

Supply and replace hot and cold PVC connection 15mm dia complete with brass flair nuts at both ends. ( ISI marked and suitable for hot water supply upto 100 degree celcius complete all as specified and directed by Engr-in-charge.

Supply and replace brass pressure release valve chromium plated suitable for geyser 25/50 ltr capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing anchor bolt 12mmX100mm long complete all as specified and directed (Note:- Anchor bolt shall be grouted with hammer drill only) complete all as specified and directed by Engr-in-charge.

Supply and replace bottom cover plate of geyser of capacity 25/50 ltr complete with MS screw all as per sample complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement Stop valve, cast copper alloy, screwed down,m high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for bore dia of pipe 15mm complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement plug top 3 pin 6 amps AC 240 Volts complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement plug top 3 pin 16 amps AC 240 Volts complete all as specified and directed by Engr-in-charge.

Supply & fix in replacement cord flexible PVC insulated and over all sheathed, 3 core, flexible copper conductor of size 1.50 sqmm, cut to size complete all as specified and directed by Engr-in-charge.

As per item no 106 above but size 2.5 sqmm complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement cord flexible PVC insulated , 2 core, (22/0076) flexible copper strandred conductor of cut to size for connection ceiling rose to fittings and fixture all as required at site complete all as specified and directed by Engr-in-charge.

Supply, fixing Installing and testing ISI marked energy efficient, water heater storage type, electricaly operated, single phase, 50Hz (5 star rating), complete of 25 Ltr capacity with and including supply and fixing, wire armoured 450 mm long, 15 mm dia, brass coupler etc, flexible pipe suitable to withstand upto 100 °C for hot and cold water, Anchor faster- 04 Nos of suitable size, 3 core PVC insulated, FRLS multistranded copper conductor cable and plug top of 15 Amp capacity complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of carbon fiber heating element 1000 watt , 240 volt, suitable for existing heat piller complete all as specified and directed by Engr-in-charge.

Supply and fixing slim panel type wall mounting heater, less burning oxygen, eco friendly convection tech,240 volt 1000 watt complete with nut bolt clamp and hanging unit etc complete all as specified and directed by Engr-in-charge.

Supply and fixing, laying and testing 1100 volts grade heavy duty cable PVC insulated aluminium staranded conductor , served with inner sheathed PVC tape and overall PVC sheathed in service connection one twin core flat or circular of size 10 sqmm x 2 core complete all as specified and directed by Engr-in-charge.

Dismantling from insulators including taking down ACSR conductor any size from overhead lines and depositing to MES store yard complete all as specified and directed by Engr-in-charge.

Dismantling earth wire any size from eye hooks/insulators etc from overhead lines and depositing to MES store yard complete all as specified and directed by Engr-in-charge.

Dismantling insulator any type and any size from over head lines and depositing to MES store yard complete all as specified and directed by Engr-in-charge.

Supply and stringing ACSR conductor any size to over head lines, stretching properly to achieve proper sag including binding to insulators using GI/aluminium binding wire complete all as specified and directed by Engr-in-charge.

Supply and fixing galvanized steel wire of size 4mm dia to over head line as continuous earth or fabrication of guarding cradles complete all as specified and directed by Engr-in-charge.

Unbinding from insulators ACSR conductor any size of over head line for repairs. Restretching of ACSR conductor to achieve proper sag and rebinding to the insulators using aluminium/GI binding wire complete all as specified and directed by Engr-in-charge.

All as per item srl No 118 above but GI wire complete all as specified and directed by Engr-in-charge.

Material & labour for cutting/trimming tree branches around overhead lines to a distance of 01 meter both side from overhead lines or poles after taking proper shut down of electric supply from MES complete all as specified and directed by Engr-in-charge.

M&L for Stay assembly set complete with accessories like stay rod/strand/plate ,loop type insulator, clamps, excavation, concreate etc for LT/HT pole any type using necessary T&P as required on site complete all as specified and directed by Engr-in-charge.

Material & labour for pin type porcelain, vitreos, white, brown or green insulators including one galvanized mild steel spindle, two galvanised iron washers and one galvanised iron nut 100mm height, 65mm dia complete all as specified and directed by Engr-in-charge.

Material & labour for loop type insulator, vitreous porcelain white brown or green small size with overall dimensions 65x90mm, clearance of hole 16mm all as specified and directed by the Engr-in-charge.

Material & labour for loop type insulator, vitreiys porcelain white brown or green large size with overall dimensions 90x140mm, clearance of hole 25.5mm complete all as specified and directed by Engr-in-charge.

Supply and fixing Aluminium strip 25x3mm complete with saddles/ insulators made out of PVC or fibre and fixing screws for roof conductor/down conductor including welding or brazing for joints complete all as specified and directed by Engr-in-charge.

Supply and fixing copper strip 20x3mm complete with saddles/ insulators made out of PVC or fibre and fixing screws for roof conductor/down conductor including welding or brazing for joints complete all as specified and directed by Engr-in-charge.

Supply and fixing earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanized iron or steel wire complete all as specified and directed by Engr-in-charge.

S&F in replacement outdoor intergal fantasy decorative LED bollard with IP protection 65 post top lantern suitable for landscape lighting in and including 08 watt LED with all complete fixing accessories and suitable arrangement as required at site complete all as specified and directed by Engr-in-charge.

Supply & fix street light time switch of size 50 x 50 x 30 cm made out of MS sheet 1.6 mm thick factory fabricated duly powder coated with front door operable heaving pressure lock suitable for and including the followings :- (i) Street light time switch multi functional digital for automatic switching on & off of street lights at a preset time model Astrorex D-21 of as per existing make all as required = 01 Nos (ii) Air break contactor AC 415 volts, 50 HZ 3 phase 70 A with operating coil voltage 220 volts conforming to - 01 No (iii) Bakelite fuse base and carrier with HRC fuses 63 amps 415 V as per existing make – 04 Nos (iv) Bakelite fuse base and carrier with HRC fuses 5 amps 230 V as per existing make– 02 Nos all as specified and directed by the Engr-in-charge. (v) All accessories pre wired with suitable size copper conductor cable including making necessary arrangements for fixing to wall / pole / panel all as specified and directed by the Engr-in-charge.

Supplying including laying testing and connecting in replacement of XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electrical cable with aluminium conductor, 1100 volts grade, cross-sectional area with suitable lugs of following sizes : (a) 16 sqmm 2 core all as specified and directed by the Engr-in-charge.

All as per item No 130 above but 25 sqmm 2 core all as specified and directed by the Engr-in-charge.

All as per item No 130 above but 35 sqmm 3.5 core all as specified and directed by the Engr-in-charge.

All as per item No 130 above here-in-before but 50 sqmm 3.5 core all as specified and directed by the Engr-in-charge.

All as per item No 130 above here-in-before but 70 sqmm 3.5 core all as specified and directed by the Engr-in-charge.

All as per item No 130 above here-in-before but 95 sqmm 3.5 core all as specified and directed by the Engr-in-charge.

All as per item No 130 above here-in-before but 120 sqmm 3.5 core all as specified and directed by the Engr-in-charge.

Excavation in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, laying of cables and getting out complete all as specified and directed by the Engr-in-charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm each layer all as specified and directed by the Engr-in-charge.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed by the Engr-in-charge.

Sand cushioning to under ground cable 8 cm thick layer below the cable and 15cm thick above the cable complete and all as specified and directed by the Engr-in-charge.

Brick protection with well burnt sub class ‘B’ brick a butting each other( width wise) across the cable laid in trenches complete and all as specified and directed by the Engr-in-charge.

Material & labour for tubing GI light grade 50mm bore for cable protection laid in ducts, fixed to wall or poles including fixing arrangement all as specified and directed by the Engr-in-charge.

All as per srl item No 32 above but of size 40mm bore all as specified and directed by the Engr-in-charge.

Supply and fixing in replacment of battery 12 Volt , 150 AH, dry type with suitable copper connecter terminal lead (positive and negative) for DG set 62.5 KVA complete all as specified and directed by the Engr-in-charge.

Supply and fixing in replacment of battery 12 Volt , 180 AH, dry type with suitable copper connecter terminal lead (positive and negative) for DG set 82.5 KVA complete all as specified and directed by the Engr-in-charge.

Supply and fixing in replacement of portable one battery charger set to accommodate with copper connecting +ve/-ve lead terminal, voltage control regulator setector switch of 12 Volt, 24 V,36 V,current control regulator switch, amps meter, electronic fuse, push to reset , AC mains on/off buttons complete as factory made all as specified and directed by the Engr-in-charge.

Supply and fixing neon indicater lamp set of three (RYB) PVC body with contact block and assembly to be fixed on exsisting panal board complete all as specified and directed by the Engr-in-charge.

Supply and fixing PVC 1100 volt LT phase seperator/spacer for 3 phase 4 wire system incl taking down U/S seperater all as specified and directed by the Engr-in-charge.

Supply and fixing PVC 1100 Volts LT phase seperator/spacer for 1 phase 2 wire system incl taking down u/s seperater all as specified and directed by the Engr-in-charge.

Supply and install in replacment ACB 4 Pole, 50 KA, 415 volt with thermal magnetic release, adjustable, manual fixed type of capacity 630 Amp complete all as specified and directed by the Engr-in-charge.

M&L for Danger Notice Plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with white letter, figures and conventional skull & bones in signal red colour and fixed with MS clamps, nuts and bolts of approved size, for LT, 20x15cm size complete all as specified and directed by the Engr-in-charge.

Supply and fixing single core copper multistrandred conductor flexible PVC Insulated heavy duty Industrial cable (unsheathed) 1100 volts size 16 sqmm ( per 100 RM roll) complete all as specified and directed by the Engr-in-charge.

Supply and fixing MCCB 4 Pole 415 Volts with rupturing capacity 16 KA 100 Amps fixed type complete all as specified and directed by the Engr-in-charge.

Supply and fixing MCCB 4 Pole 415 Volts with rupturing capacity 16 KA 125 Amps fixed type complete all as specified and directed by the Engr-in-charge.

Supply and fixing MCCB 4 Pole 415 Volts with rupturing capacity 35/36 KA 160 Amps Adjustable type thermal Megnatic release complete all as specified and directed by the Engr-in-charge.

Earthing complete with galvanized cast iron earth plate electrode 600x600x6 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below ;normal ground level ) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to galvanized iron strip 32x6 mm as earth lead by means of bolts, nuts washers and check nuts of steel/GI duly protected with 40 mm bore light grade pipe upto main board , 20mm bore watering pipe light grade with CI/MS funnel and wire mesh including excavation , earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, add charcoal dust and common salt after mixing with BFC (Back Fill Compound) inadeqate quantity as recommended by the manufacturer or as diirectred by the Engr-in-charge all as shown in electrical plate No. 03 of SSR part-I 2009 having pit in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in PCC pit for CI cover of required size, funnel with wire mesh complete and all as specified and directed by the Engr-in-charge.

All as per item srl No 150 above but using GI wire 4mm thick. Note for item No 150 & 151 : If the earth result of the earthing found more than 4 Ohms then new earthing will be executed by the contractor without any extra cost for the result upto 4 ohms all as specified and directed by the Engr-in-charge.

Scraping of old paint from the steel tubular/PCC pole 09/11 mtr height with out removing accessories and preparation of surfaces for repainting. Repainting the pole with one coat of alternative black and yellow (existing colour) straps of 30 cm each upto 1.5 mtr height using synthetic enamel paint . Repainting the remaining pole and iron parts i.e U clamps, channels etc above 1.5 mtr height by applying one coat of aluminium paint including writing Pole Nos. with Black paint complete all as specified and directed by the Engr-in-charge.

Earthing complete with copper earth plate 600x600x3.15 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below ;normal ground level ) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to copper strip 20X3 mm as earth lead by means of bolts, nuts washers and check nuts of copper/ bronze duly protected with 40 mm bore light grade pipe upto main board , 20mm bore watering pipe light grade with CI/MS funnel and wire mesh including excavation , earth work in any type of soil and removing the surplus soil to a distance not exceeding 50 Mtr, add charcoal dust and common salt as diirectred by the Engr-in-charge all as shown in electrical plate No. 03 of SSR part-I 2009 having pit in PCC 1:2:4 type B-1 including angle iron frame made of angle iron of size 40x40x6mm grouted in PCC pit for CI cover of required size, funnel with wire mesh complete and all as specified and as directed by Engr-in-charge. Note : If the earth result of the earthing found more than 1 Ohm then new earthing will be executed by the contractor without any extra cost for the result upto 1 ohm all as specified and directed by the Engr-in-charge.

Supply and fixing On load change overswitch 125 Amps, 4 pole, 415 V including making necessary connections on wall/LT panels etc with suitable size of thimbles, cable glands and jointing material etc complete all as specified and directed by the Engr-in-charge.

Supply and fixing Onload change over switch in sheet steel enclosure 100 Amps, 4 pole, 415 V complete including making necessary connections on wall/LT panels etc with suitable size of thimbles, cable glands and jointing material etc complete all as specified and directed by the Engr-in-charge.

M/s Shakti Electric Works

M/S SATPAL & BROTHERS

M/S SHRI RAM BUILDERS

PAWAN KUMAR GOVT. CONTRACTORS