SPECIAL REPAIR OF TOILET OF BLDG NO P 263 AND P 253 AT AIRMEN BILLETS AT CHAF BANGALORE

Amount

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings & fixtures such as switches, ceiling rose, pendants, regulators, sockets, ceiling roses,pendants, regulators, light fittings etc and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLSH copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, incl metal flush box of 1.60 mm thick fabricated CI/MS sheet terminal box covered with 3mm thick bakelite sheet top cover for housing switches, sockets, regulators etc including all cutting / chases etc in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- (a) One light point controlled by one, one way switch 06 Amps

(b) One exhaust fan point controlled by one, one way switch 06 Amps complete all as specified and directed.

(c) One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed.

(d) One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed.

All as per item no 2, here in above but point wiring with 2.5 sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLSH cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

S&F Switch piano flush type 5/6 Amps single pole one way complete all as specified and directed.

S&F Socket Outlet 2 in 1, 3 pin 5 Amps flush type complete all as specified and directed.

S&F Switch piano flush type 15/16 Amps, single pole one way complete all as specified and directed.

S&F Socket Outlet 2 in 1 3/6 pin 5 and 15 Amp flush type complete all as specified and directed.

S&F ceiling rose, 65 x 50 mm surface type with 3 terminals incl connection complete all as specified and directed.

S&F (in replacement) on surface/wall mounted LED batten, robust extruded aluminium housing and intigrated electronic drive 20 watt, 4 feet, with accessories including connection with 2 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Taking down exhaust fan any make from wall carefully, cleaning to remove any type of sticky dust with cleaning material as required and re-fixing in its original / desired location with making hole in wall of required size and connection incl provision of cable from ceiling rose to connector of fan after repairing, greasing, oiling, replacement of minor items such as pins, nut bolts, flexible wire etc incl spray painting with synthetic enamel paint complete all as specified and directed.

S&F exhaust fan, heavy duty, steel body, AC, single phase 230 volts, 50 Hz, with blades, frame and louvers shutter with necessary hole drilling in wall witth required civil wk and making good the disturbed surfaces incl taking down old exh fan & depositing to MES store complete all as specified and directed. of following sizes :- (a) 380 mm sweep

(b) 300 mm sweep

S&F (in replacement) energy saving security light fitting of 45 watts LED pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections, fitting to be fitted on old / new GI bracket complete all as specified and directed. Note- New GI bracket will be measured and paid seperately)

S&F security light mounting bracket of suitable length made out of 40 mm bore light grade GI tube of suitable length, bend to shape and fixed to wall / pole by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

M&L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing including taking down old sub main wiring complete all as specified and directed. Note- (i) Two runs of single core 06 Sqmm cable and one run 06 Sqmm earth wire including PVC concealed conduit together will be measured as one unit. (ii) Cutting, chasing, drilling in any type of wall for fixing of concealed conduit for sub main wiring included in quoted rate. No extra payment will be made for this.

S&F (in replacement) sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, with 200 Amps rated copper bus bar and double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall complete all as specified and directed. for the following way :- (a) 4 way

S&F MCB SPN 40 amps, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete all as specified and directed.

S&F MCB SP, AC, 240 volts of 06 to 32 Amps capacity "C" Curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 sqm with shutter(without taking of shutter from the frames) including taking out hold fasts and PCC bed block complete all as specified and directed.

Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS wire tube supplied and fixed in opening as per specification complete all as specified and directed.

Factory made solid PVC Moulded Door shutter with particle board core,28 to 30mm thick (stiles), wtih 2,4,or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

S&F Pressed steel frames for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as filled in pressed steel foor frames etc complete all as specified and directed.

S&F mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels , commercial type on both sides, fixed to chowkhats complete all as specified and directed.

S&F for 100mm long butt hinges cold rolled mild steel medium weight complete all as specified and directed.

S&F for 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed.

S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for 18 to 19mm thick pre-laminated partical board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, and fixed with screw and prepared kitchen cabinate and hanging on wall and also fixed to timber frame work where required complete all as specified and directed.

S&F for Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails for 18 to 19mm thick complete all as specified and directed.

S&F 30 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

Taking down steel window/ventilator (without taking off shutter from the frame) exc. 1 sqm and n.exc. 2.00 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

S&F steel window/ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and with glazing bars complete with dovetailed or welded complete all as specified and directed.

S&F Framed work such as grills ,shouldered and/or riveted,or forged into spikes; framed,guard bars; barred iron doors;ladders; framed balusters; walk,ways; railings; framework of water tanks and similar work,conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F for 4mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5sq. m in each pane complete all as specified and directed.

S&F for 4mm thick frosted Sheet glass,ordinary quality and glazin gwith oil putty in square n exc 0.5sq. m in each pane complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement mortar complete all as specified and directed.

M & L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement morter bedding but not backing coat removing serviceable tiles to store and rubbish off premises etc complete all as specified and directed.

M&L for Non skid ceramic coloured joint free tiles 7to 8mm thick (square/ rectangular), area of each tiles exceeding 0.11sqm but n exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15 mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.

Glazed ceramic tiles coloured of size 450X 300X 7mm thick as vertical sruface set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigment to match the shade of the tiles over 10 mm thick rendering 1:3 for laying wall finishes complete all as specified and directed.

M&L for 25 mm thick cement concrete type B0 1:2:4 using 12.5 mm graded stone aggregate as in levelling concrete finished even and fair to recive floor finshes, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specified and directed

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering and 5mm thick in cement morter 1:4 over 10mm thick in cement morter 1:6in two layers on fair faces of brick work or concrete surfaces using with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separetely.

Supply only water proofing compound ccomplete all as specified and directed.

M&L for rendering 5mm thick on concrete surfaces of ceiling in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for providing water proofing treatment to sunken floor providing 15mm thick cement plaster in cement mortar 1:3 in mixed with Pidi Proof LW or Dr Fixit @ 200 ml per 50kg of cement and finished even and smooth surface without using extra cement complete all as specified and directed. Note : WPC shall measured and paid saperately

M&L for Application of two coats of pidifin 2k water proof coating i.e proof coat of Pidilite @ approx 1.00 Kg per sqm as per manufactures instructions complete all as specified and directed. Note of item No 57 & 58 (i) The rate includes for preparation of surface treatment and sealing of all joints, cracks, corners and junction of pipes etc and ponding test. (ii) PCC filling shall be measured and paid separately. (iii) Water testing of sunken floor shall be carried after complition of work for seepage/leakage & rates quoted by the tenderer shall be deemed inclusive of expdr incurred on testing.

Demolition of brick/PCC block work built in cement mortar incl. all quoins, arches pillars etc but excluding ashlar facings etc. complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar type C1 (1:3:6) (20mm graded aggregate) set in cement mortar (1:6) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in sub base/ plinth protection complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (Pedestal Pattern) white including P and S trap ,including white plastic seat cover with mild steel CP hinging device, flush pipe complete jointing, connecting and making good the disturbed surfaces complete all as specified and directed.

S&F in repairs pillar cock right hand operated swan neck spout complete all as specified and directed. Cera cat part no QT F2006105 or equivelent

S&F in repairs counter top white wash basin OVAL type of size 560x470x190mm complete all as specified and directed. Cera cat part no S2030104 or equivelent

S&F in repairs 32 mm bore waste fittings, brass chromium plated for glazed ware sinks basin etc with long screwed shanks and flynuts flanged and bedded in red lead cement and other ends fixed as in repairs, complete all as specified and directed .

S&F in repairs Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating, fulsh pipe and union for discharge pipe, fixed as in repairs, complete all as specifed and directed.

S&F in repair 15mm PVC connection 600mm long between ends with PTMT nut and washer complete all as specified and directed .

S&F in repair 15 mm bore Stop valves fancy type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15 mm bore Stop valves, fancy type chromium plated with long shank and cup (concealed type), fixed, complete all as specified and directed . Make :Cera and equivalent makes of JOHNSON/ESS-ESS/ARK etc.

S&F in repair bib taps, fancy type with long neck chromium plated with crutch or butterfly hadle screwed down screwed for iron pipe or brass ferule of 15mm bore complete all as specified and directed.

S&F CP two way bib cock with all accessories complet all specified and directed. Make :Cera cat part no F1017163 and equivalent makes of JOHNSON/ESS-ESS/ARK etc.

S&F in repair Chromium plated brass 15 mm dia health faucet with 8 mm dia, 1.2 m long flexible tube with wall hook complete necessary fixing arrangements etc complete all as specified and directed. Make: Jaquar/Cera/Ess Ess or equivalent as approved.

S&F 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed as in repairs, complete all as specified and directed .

S&F in repair CP shower rose with or without swivel joints 125 mm size including fixing to steel pipe or union 15 mm bore complete all as specified and directed.

S&F Stainless steel soap dish of approved make, complete all as specified and as directed.

S&F in repair Tubular towel rail, brass chromium plated 20mm dia, D type, 60 cm long between flanges, fixed to wall with chrome brackets complete all as specified and directed

S&F Sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore complete all as specified and directed.

Taking down 25mm steel water tubing and connections, including cleaning for and refixing or removal to store complete all as specified and directed.

S&F 15mm bore ‘Medim grade’ tubes,galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including necessary scaffolding upto 6th storey complete all as specified and directed.

S&F 20 mm bore steel water tubing medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including necessary scaffolding upto 6th storey complete all as specified and directed.

S&F 25 mm bore steel water tubing medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including necessary scaffolding upto 6th storey complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (cylindrical or vertical with closed top) 500ltrs capacity hoisted and fixed in position including dismantling of existing water tank and disconnecting pipeline connection complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (cylindrical or vertical with closed top) 2000ltrs capacity hoisted and fixed in position including dismantling of existing water tank and disconnecting pipeline connection complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair Ball brass valves, 20mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Dismantling of PVC drain pipes of 75/100mm bore, including all fittings, jointed in cement mortar and taking out of trenches, if required and removing from site of work complete all as specified and directed.

S&F 110mm PVC (SWR) pipes single socketed, in any lengthPVC (SWR) pipes singlewith rubber ring joints, fixed to walls and fixed complete all as specified and directed.

S&F 75mm PVC (SWR) pipes singlesocketed, in any lengthPVC (SWR) pipes singlewith rubber ring joints, l fixed to walls and fixed complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints laid in floor and fixed complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius and fixed complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius and fixed complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single,(Single T) equal or unequal with access door and fixed complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single,(Single T) equal or unequal with access door and fixed complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed.

S&F PVC (SWR) 75mm dia multi floor trap with grating including jointing with solvent cement etc complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 100/110mm dia, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement and fixed complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for complete removal of of existing treatment old decorated surfaces of walls and applying two coat of of cement based paint over a coat of chalk primer incl scaffolding upto 6th storey complete all as specified and directed.

M&L for preparation new wood or wood base surface and applying of Filler coat over a coat of pink primer with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finishold of cabinets/book cases/ward robes of any description over 10 cm width or girth. complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for Preparation of old existing wood or wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for Preparation of old existing Steel surfaces over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Removing building materials etc (other than spoil payable under items 03028 to 03031) to a distance of 10 Km beyond the lead including in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. Note : All debris shall be removed from MD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

PRACHANIVA CONSTRUCTIONS (BID ID -3496746)

OM ENTERPRISES (BID ID -3491931)

D NAGI REDDY (BID ID -3492980)