REPAIR TO DRAINAGE SYSTEM FENCING BOUNDARY WALL AND INTERLOCKING PATH ETC UNDER AGE B/R-II AT AFS KANPUR

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and as directed.

Demolition of cement concrete (unreinforced ) in ground floors and pavings n exc 15 cm thickness (below or above ground level complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

M&L for cement concrete 1:3:6 type C- 2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for brick work old size with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

Ditto all as per item No 5 above but except bricks. Note:- Old bricks obtained from item No 1 shall be reused after cleaning.

M&L for PCC 1:3:6 type C-1 (20 mm graded aggregate ) in copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement mixed with WPCcomplete all as specified and as directed.

Supply only liquid water proofing compound

M & L for preparing new plastered surface and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M & L for preparing old decorated surface and applying two coats of cement base paint complete all as specified and as directed.

Demolition of reinforced cement concrete of any description complete all as directed by Engineer-in-Charge

S&F SFRC drain/manhole cover 'heavy duty' of overall size 1000mm x 600mm x 100mm factory made complete all as specified and as directed by Engineer-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s Polycrete. (b) M/s KK Manhole. (ii) Contractor will provide manufactuerer test certificate of SFRC cover & frame

M&L cement concrete Type C- 2 (1:3:6) using 40 mm graded stone aggregate as in surface channel and drain, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc

M&L cement concrete Type D-2 1:4:8 (using 20mm graded stone aggregate) 100 mm thick as in sub base and mass complete all as specified and directed,

M&L machine pressed precast concrete interlocking paver block glazed, coloured any shape and size confirming to IS 15658-2006 of 80mm thick, M-40 grade with grey cement and pigment over and including 50 mm thick sand cushioning complete all as specified and directed by Engr-in-Charge.

M & L polished Chequered cement concrete Coloured tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey pigment cement and pigment laid on screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed .

M & L for machine cut kota stone slab flooring 20-25mm thick over and includindg 15 mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M & L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick plaster in cm 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

M&L 75 mm thick cement concrete type C-2 1:3:6 mix (40mm graded agg) as in flooring /paving/plinth protection including finishing even & smooth w/o using extra cement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling posts or struts(wood, steel or R.C.C.) any section, including taking out embedded in concrete or brick portion and making good disturbed

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out complete all as specified and directed

M & L Cement Concrete Type B 2 1:2:4 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concreteand screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as difillets (for securing wire meshrected, drilling holes notching for wire, etc.; flat iron,etc.) including all necessary and similar work conforming toFe-290 Gde E-165 complete all as specified and directed.

S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S&F 1.00m dia concertina coil hot dip prime galvanized punched tape string core (2.8mm thick wire of risn tensile strength of 165 Kg/50mm tape (0.52mm thick) and having 0.915m dia (appx) after stretching, stretched length of 9.00m (maximum) including GI-U clips for laying over boundary wall with angle iron complete all as specified and directed.

Restraining re-scuring including making good staples etc galvanised. 2 strand, steel barbed wire of any description and restraining and refixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; frame work of water tanks and similar workconforming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L for preparation of old painted steel surface and applying one coats of synthetic enamel paint complete all as specified and as directed

M&L for preparation of new or previously untreated surfaces and applying two coats of synthetic enamel paint over a coat of redoxide, zinc chrome primer of same make complete all as specified and as directed

M &L Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksand hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) andhanging; also fastening and fixing complete all as specified and as directed.

S&F 1.25mm thick Mild steel, plain, blacksheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bendingor turning up, mitred angles, etc. as required complete all as specified and as directed

S&F in repairs of triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.

S&F in repairs of triple layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including providing all necessary fittings for connecting with pipe line, metal lockable cover complete all as specified and directed by Engr-in-charge.

M & L for pre - cast RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in manhole cover / drain covers set in CM 1:6 complete all as specified and directed.

S & F mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed

B R CONSTRUCTIONS

M/S KUSHWAHA BROTHERS

M/S SDS Construction Co.