work for dismantling of L and T make feeder breaker along with secondary F/B No- 17 and fabrication, erection, installation and commissioning of same at M5 / M6 conveyor belt of Back-Up, Gevra project.

Amount

Complete dismantling of L&T make feeder Bleaker no 17 with secondary crushing unit etc.

Dismantling of conveyor structure (Motor, Gear box, coveyor pulley, stool, stringer, rollers, brackets of 1400mnn conveyor etc.)

Structural steel work riveted, bolted or welded In built up sections, trusses and framed work Including cutting hosting, fixing in position and applying a priming coat of approved steel primer all complete. (Labour rate)

Installation, commissioning and trail run of complete feeder breaker along with secondary crusher

Installation of conveyor structure including levelling, centering, etc. (top rollers, brackets, Motor, Gear Box, conveyor pulleys of 1400mm conveyor etc.)

Painting of Structural steel work with 3 coat including one coat of primer of red oxide or equivalent primer paint of approved brand & two coat enamel paint approved brand of required shade directed by Engr I/C.

Excavation for foundation in soft soil including dressing of sides and ramming of bottom lift up to 1.5 Mtr, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 Mtr All kind of soil.

Providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).

Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). (excluding reinforcement)

Providing of mild steel round bar for reinforcement

Fixing of corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated "j" or "L" hooks, bolt and nuts 8mm diameter with bitumen and Gl limpet washer or with Gl limpet washers fitted with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces) excluding the cost of purlins, rafters & trusses and including cutting to size and shape wherever required. (0.63mm thick with Zink coating not less than 275 gram/M2 ) with material.

Installation and commissioning of G.l. pipe complete with G l. fititlng and clamps including cutting and making good the walls etc. (40mm dia nominal bore) with material.

Fixing of gun metal gate valve with C.I. wheel of approved quality (screwed end) : (40 mm nominal bore) with material.

Installation and commissioning of G I pipe complete with G.l. fititing and clamps including cutting and making good the walls etc. (25mm dia nominal bore) with material

Fixing of spray nozzles solid cone discharging 25 LPM, 4 kg/m2 and made out of SS304BSP thread with material.

Fixing of gun metal gate valve with C.I. wheel of approved quality (screwed end) : (25 mm nominal bore) with material.

Cleaning of fallen coal/dust/muck etc. in the existing structures & surroundings.

Fixing and installation of control panel Part no. BD-400 FS, vide part no. BD-400-FS-1000.

Installation and commissioning of pre-fabricated cabin with insulated puff sheet, AC and control panel for feeder breaker with material.

Total impact of GST for the purpose of CTC

JYOTI MARKETING & ENGINEERING SERVICES

BLACK DIAMOND EQUIPMENTS PVT. LTD.