REWIIRING OF CERTAIN BLDGS INSIDE HOSPITAL AREA AND ALLIED WORKS AT 7 AFH KANPUR CANTT

Amount

Taking down carefully point wiring from existing place (light/fan, socket or power points complete) with all fittings such as switches, sockets ceiling rose , pendant holder, fitting and fixtures , MCB DB’s , MCB, Main switches, call bell etc and making good to disturbed surface to wall ,floor etc to match with existing surface either by using same colour distemper or white colour wash as required complete all as specified and directed.

M & L for point wiring with PVC FRLS insulated and unsheathed copper stranded conductor cable of size 1.5 Sq mm , 1100 V drawn in and including PVC casing and capping complete including cast iron/pressed steel terminal box 1.6 mm thick of required size Bakelite sheet 3mm thick for mounting switch , socket brass screws and washer including PVC insulated and unsheathed solid copper wire of size 1.5 Sq mm will be used as continuous earth wire for the following :-

One light /fan point controlled by one, one way switch

One 5/6 Amp socket on the same board with other switch

One 5/6 Amp socket on independent board.

One 3 pin 15 Amp socket independent but with 2.5 q mm PVC insulated unsheathed copper stranded conductor and earth wire with 1.5 Sqmm

One bell point controlled by one, one way bell push button.

Ditto all as per item No. 2 above but concealled wiring drawn in and including non metallic PVC conduit 20 mm dia medium grade for the following :-

One light fan point controlled by one way switch.

One 3 pin 5 Amp socket on the same board

One 3 pin 5 Amp socket on independent board.

One 3pin 15 Amp socket independent but with 2.5 sq mm PVC insulated unsheathed copper stranded conductor and 1.5 Sq mm size PVC insulated soild copper conductor as earth continuity conductor.

One bell point controlled by one push bottom switch.

S & F switch piano type 240 V, 5 Amp , SP one way flush type complete all as specified and directed.

S & F bell push 240 V, 5 Amp , SP one way flush type complete all as specified and directed.

S & F of socket out let combination multipurpose 3 Pin 5 amp, 240 volt and with 2 pin 5 amp out let also flush type including for existing points also (non shuttered) complete as specified

S & F of switch socket outlet combination 3 pin 15 Amp, 3 Pin 5 Amp out let also flush type (non shuttered) including for existing points complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 amps complete all as specified and directed.

S & F ceiling rose surface backelite of size 65 mm x 20 mm three terminal complete all as specified and directed.

S & F for lamp holder metal cased body of brass with back plate complete with 5 Watt LED lamp of make C&S Cat Part No LTHPLEDLAMP5W/B22 or equivalent make in Crompton /Philips/Bajaj as approved by GE in writing.

S & F in replacement sheet metal enclosures for MCB distribution board TPN, 4 way double door type including with MCCB 4 Pole, 100 Amps, 16 KA fixed type as incomer with 200 amp rated bus bar complete all as specified and directed.

S & F sheet metal enclosures for MCB distribution board TPN 4 way double door type including with MCCB 4 pole, 100 Amps, 16 KA fixed type as incomer with 200 Amp rated bus bar complete all as specified and directed.

S & F sheet metal enclosures for MCB distribution board SPN 8 way double door type with 200 amp rated bus bar and suitable for SPN Isolator as incomer complete all as specified and directed.

Ditto all as per item No. 12 above but for SPN 4 way 240 Volt.

S & F in repair Isolator TPN , 63 Amp 4 pole Isolator, 415 Volt complete all as specified and directed.

S & F in replacement Isolator SPN , 63 Amp , 240 Volt complete all as specified and directed.

S & F in replacement MCB SP upto 32 Amp ,240 Volt complete all as specified and directed.

S & F in replacement MCCB 4 Pole 16KA 100 Amps fixed type complete all as specified and directed.

S & F in replacement Isolator SPN , 20 to40 Amp , 240 Volt complete all as specified and directed.

S & F in replacement of bell electric , 240 Volt , single pole complete all as specified and directed.

S & F in replacement of regulator Electronic type 240 Volt single phase suitable for ceiling fan step type complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode of size 60 cm x 60 cm x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.50 Mtr below normal ground level connected to galvanized earth lead strip 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 connected to earthing test point all as specified or indicated including testing on completion including PCC pit in (1:3:6) type C-2 using 40 mm graded stone aggregate and RCC (1:2:4) type B-1 using 20 mm graded stone aggregate for 40 mm thick cover slab reinforced with 6 mm dia MS bars spacing @ 150 mm c/c, with two no’s fitting handle, GI pipe 20 mm dia light grade with funnel & wire mesh for watering and 40 mm dia light grade GI pipe for earth strip protection etc. complete all as specified and directed.

M & L for sub main wiring with two runs of single core 4 Sqmm (cross sectional area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and run of PVC insulated and unsheathed single core cable with copper conductor of size 2.5 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring commplete all as specified and directed. (Note. Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one unit).

Ditto all as per item No. 22 above in before but 6 Sqmm, 2 single core with PVC FRLS insulated, unsheathed stranded copper conductor cable of size 4 Sqmm as earth lead complete all as specified and directed.

M & L for sub main wiring with three runs of single core 6 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS cable drawn in and including PVC casing and capping with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable multi stranded with copper conductor of size 4 Sqmm as continuous nuetral and earth wire (green in colour ) respectively, run through PVC casing and capping and connected to the terminal and common earth dolly complete all as specified and directed. (Note. Four run of cable and one run of PVC casing and capping and one run of earth continuity wire shall be measured as one unit).

S & F in replacement of unserviceable bulk head fitting of any type with LED bulk fitting with 9 watt LED complete connection with copper wire 23/0076 three core from ceiling rose to bulk head fitting complete all as specified and directed. Make C&S Model No. CG801B6WLED or equivalent model of Philips/Wipro/C&S as approved by GE in writting.

S & F in replacement of existing bed light fitting with LED type surface mounted decorative bed light fitting 10 Watt LED complete with all accessories such as LED driver, LED bulb/rod and LED batten with cover etc and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 Sqmm and PVC connector etc including provision of hanging and wall mountingcomplete all as specified and directed. Make Crompton Greaves Cat Part No LCL-10-CDL or equivalent of C&S/Philips/Wipro as approved by GE in writting.

S & F in replacement fluorescent tube light fitting complete energy efficient T-8 LED batten and integrated type signle tube 20 Watt, 4 ft long white complete with LED rod, LED driver and LED batten etc and all accessories pre wire and connecting up with copper three core flexible cord of min size 0.5 Sqmm and PVC connector etc including provision of hanging and wall mounting complete all as specified and directed. Make Cormpton Greaves Cat Part No DMLN1LT8-16 and LTT8-20 or equivalent of C&S/Philips/Wipro/Havells as approved by GE in writting.

S & F in replacement of existing unserviceable recessed mounted lumanaire with energey efficient 36 Watt LED type including making connection to ceiling rose with copper flexible wire of size 23/0076 complete all as specified and directed. Make Crompton Greaves model No. LCTLS-36-CDL or equilavent model of Philips/Wipro/ Havells/C&S as approved by Ge in writting.

Taking down carefully by unscrewing from boards/out let boxes fittings and fixtures such as tube light fitting/of any type/MCB DB etc. and fixing the same at required places as directed and making connection to ceiling rose/connector with & including copper flexible cable of size 1.5 Sqmm complete all as specified and directed.

S & F in replacement of PVC insulated heavy duty electric unarmoured cable with solid aluminium conductor twin core 1100 Volts grade, cross sectional area 4 Sqmm 2 core complete all as specified and directed.

S & F in replacement of modular switch 1 way 6 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F in replacement of modular switch 1 way 16 Amp, 1 module, 240 V flush type complete all as specified and directed.

S & F in replacement of modular bell push, flush type, 6 Amp, 1 module, 240 V complete all as specified and directed.

S & F in replacement of modular socket, 6A-2/3 pin combined, 2 module, 240 V complete all as specified and directed

S & F in replacement of modular socket, 6Amp / 16Amp-2/3 pin combined, 2 module, 240 V complete all as specified and directed.

S & F in replacement of modular fan step regulator, 120 W, 2 module, 240 V complete all as specified and directed.

S & F in replacement of modular white cover plate with frame, 3 module, complete all as specified and directed.

S & F in replacement of modular white cover plate with frame, 4 module, complete all as specified and directed.

S & F in replacement of modular white cover plate with frame, 6 module, complete all as specified and directed.

S & F in replacement of modular white cover plate with frame, 8 module, complete all as specified and directed.

S & F in replacement of modular white cover plate with frame, 12 module, complete all as specified and directed.

S & F in replacement of modular metal flush box, 3 module, complete all as specified and directed.

S & F in replacement of modular metal flush box, 4 module, complete all as specified and directed.

S & F in replacement of modular metal flush box, 6 module, complete all as specified and directed.

S & F in replacement of modular metal flush box, 8 module, complete all as specified and directed.

S & F in replacement of modular metal flush box, 12 module, complete all as specified and directed.

S & F in replacement of electronic ballast for 28 Watt tube light complete all as specified and directed.

M & L for replacement of lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S & F in replacement Isolator TPN , 100 Amp, 4 pole Isolator, 415 Volt complete all as specified and directed .

S & F in replacement of electronic ballast 2 x 36 Watt, for ceiling light fitting complete all as specified and directed.

S & F in replacement of LED integrated pattern T8, indoor decoratie aluminium extruted LED fitting 20 wtt, 4 feet complete including connection from ceiling rose to T5 LED light fitting with three core PVC flexible wire complete all as specified and directed .

S & F in replacement of flexible wire 23/0076 copper conductor from ceiling rose to fitting/fixture complete all as specified and directed.

M&L for smart integrated solar street light with inbuilt in momo crystalline panel,lithium ferro phosphate (LiFePo4) battery, MPPT charge controller and PIR sensor with colour temperature 6000-6500k of 18 Watt all in one standard along with octogonal type pole of 6 meter height including earth work for foundation and providing PCC as per manufacturer norms complete all as specified and directed.

M & L for installation of new ceiling saving energy switch which contains sensitivity detector, integrated circuit, gathers automatism, convenience, safety, saving-energy and practicality functions. It works by receiving human motion infrared rays, when one enters the detection field, it can start the load at once and identify automatically day and night with the adjustable on the sun and moon position along with delay timing of minimum 10 sec to 3 sec and maximum 8 min to 2 min complete all as specified and directed.

S & F in replacement Metal clad single pole and nutral enclosure with a two pin and earth plug and socket with one single pole MCB SP 20 Amp,240V complete all as specified and directed.

S & F in replacement metal clad triple pole and nutral enclosure with a two pin and earth plug and socket with one single pole MCB TP 32 Amp, 240V complete all as specified and directed.

S & F round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connection with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in replacement of PVC insulated heavy duty electric unarmoured cable with solid aluminium conductor three core 1100 Volts grade, cross sectional area 2.5 Sqmm of following sizes:-

4" X 4" Size

7" X 4" Size

8" X 6" Size

8" X 10" Size

8" X 12" Size

Preetpowercontrol

SAKSHAM SUPPLIERS BUILDERS

DHARM ENTERPRISES

LARSEN AIR CONDITIONING & REFRIGERATION