Construction of Nallah Jagotta house to Ujjagar house in Ward No.11

Amount

Earth work in excavation for structures in all depths as per drawings and technical specification as per Clause 305.1(Three hundred Five point One) of MORD specifications 300 (three hundred) including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal in all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated Suitable materials.as per HP.PWD specification, including carriage of all labour equipment and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges .

Providing and laying cement concrete 1:6:12 (1 cement:6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in: Foundation and plinth. as per HP.PWD specification, including carriage of all labour equipment and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges .

Providing and laying cement concrete 1:2:4(1 cement:2 sand :4 graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work in:Foundation and plinth.as per HP.PWD specification, including carriage of all labour equipment and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges .

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12(1 cement :6 sand : 12 gradedstone aggregate 20mm nominal size) at plinth level in Cement Mortar 1:6(1 cement:6 sand). as per HP.PWD specification, including carriage of all labour equipment and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges .

Providing form work with steel plates 3.15 (Three point One Five ) millimetres thick welded with angle iron in frame 30*30*5 (Thirty into Thirty into Five ) millimetres, so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies in all heights of propping and cantering below supporting floor to ceiling and removal of the same in-situ-reinforced concrete and plain concrete work as per HP.PWD specification, including carriage of all labour equipment and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges in:ii) Suspended Floors, roofs and landing, shelves and their support in all floors up to all heights and levels.

Providing milled steel/tor steel reinforcement for RCC work including winding bending and placing in position complete up to floor two level. Tor steel

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting in all heights and levels, fixing in position and applying a priming coat of red lead paint completer in all respect as per structural design, drawing ,direction of the Engineer-in-Charge and as per HP.PWD. Specification 1990 volume-I, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges i)In gratings framed guard bars, ladders, railing, brackets and similar works.

Pooja Thakur

RAMESH CHAND

Brothers Traders

Vivek Dobhal

DIGVIJAY THAKUR

BHUPENDER SINGH THAKUR

Hitender Krishan