REPAIRS TO JOINERY, FLOORING, PLASTERING AND OTHER B/R WORK AT MD ACCN AT NAGPUR UNDER GE KAMPTEE.

Amount

Taking down chowkat with shutter (Without taking of shutter from frame) area exc 1.50 Sqm but nexc 4.00 Sqm each complete all a specified and directed.

Taking down chowkat with shutter (Without taking of shutter from frame) area nexc 1.50 Sqm each complete all a specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n exc 2.00 Sqm each complete all a specified and directed.

Dismantling boarding, any description, fixed in any position with nails as in cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition etc complete all as specified and directed.

M&L 18mm thick Plywood, grade BWR, type BB fixed with screws to timber frame work with beading as requiredcomplete all as specified and directed.

M&L for 0.90mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all a specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters,purlins, etc. under 40 sq. Cm in section frame work in any position complete complete all a specified and directed.

M&L for Second class hard-wood Plain fillets square, rectangular or triangular in sectionexc 13cm and nexc 25 sqcm sectional area, clean sawn, se-cured with nails or brads in cupboard and similar work etc all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section in any position all as specified and directed.

M&L for Second class hard-wood Clean sawn in scantlings complete all a specified and directed.

M &L for PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in block for hold fast block or similar work and finished the surface with existing and including form workc omplete all a specified and directed.

S&F 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all a specified and directed.

S&F Mild steel bands, straps, support clamps, hold fasts etc and similar small articles conforming to Fe-410-0 or 310-0 complete all a specified and directed.

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making hold fast and fixing in concrete 1:3:6 type CI incl tie bars of 10 mm dia and hold fast of flat iron 40 X 5 mm all complete confirming to Fe 290 (Gde E-165) complete all as specified and directed.

S&F 35 mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure freated of any number of panel all as directed and directed.

S&F 2nd class hard wood 30mm thickness Glazed and skeleton shutters ( Factory made), open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all a specified and directed.

S&F 30mm thick Flush shutters solid core construction with Block board and plywood face panels commercial type both side complete all a specified and directed.

Preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer complete all a specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing complete all a specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) cosisting of rame made out of MS tube for top & bottom rails MS frame shall be covered with heat molded wood plain cloour PVC 'C' channel having a PVC sheet strip of 20mm widt struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail lock rail & bottom rail on wither side all as specified and directed.

All as per item no. 20 above but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all a specified and directed.

S&F aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's specifications complete all as specified and directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 4.0 mm thick tinted sheet glass of approved make and shade/tint(Make of Aluminium Sections powder coated : Jindal or equivalent of JINDAL).

Dismantling of AC (Corrugated or semi corrugated etc) sheets in roof covering including ridges complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all a specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F in repairs glass shelf 500x60x6mm (with ABS brackets) complete all as specidied and directed. Make- Prayag , CAT No.: BEA-47 or equivalent complete all a specified and directed.

S&F Corner glass Shelf (with Bracket) fixed to walls with chromium plated (CP) brass screws Make Jaquar (.ACN-CHR-1173) or equivalent complete all a specified and directed.

S&F in repair Prayag wall cabinet Mirror (500x400Appx) Make- Prayag , CAT No.: 556 or equivalent

S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of 500 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of 1000 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and directed.

S&F Peg set of six powder coated fixed with chromium plated brass screws including rawal plug complete all as specified and as directed.

S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all a specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all a specified and directed.

S&F in repairs sheet glass ordinary quality 3mm thick quality with oil putty in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.

S&F in repairs 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane in each pane all as specified and as directed.

S&F Stainless steel auto hinges complete all as specified.

S&F mild steel medium weight could roll 100mm size butt hinges complete all as specified.

S&F for 150mm long aluminum, anodized, barrel tower bolts of extruded section and fixed

S&F 250mm long Aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all a specified and directed.

S&F for 150mm long aluminum handles, cast type, anodized complete all a specified and directed.

S&F for 100mm long Brass handles, cast type, polished bright complete all a specified and directed.

S & F in repairs 40mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all a specified and directed.

S&F in repairs for Brass Mortice lock, vertical type, size 100 mm with 4 lever complete all a specified and directed.

S & F in repairs Floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor over all length 150 mm complete all a specified and directed.

M&L 10 to 12 mm thick froasted toughend glass fixed to door, window or any other location including brackets, supports , handles, lock, floor springs and other accesaries as required complete all as specified and directed.

S&F anodised aluminium frame for door, windows, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc complete all as specifed.

S&F Anodised aluminium window and ventilator shutters, side hung type/Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S & F Aluminium Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

M&L 12 mm thick prelaminated particle board, Exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work complete all as specified.

M&L 18 mm thick prelaminated particle board, Exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work complete all as specified.

S&F 4.8 mm thick tinted glass and glazing with rubber beading and aluminium glazing bar in each panel complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane ganbies, rails and fastenings and heavy bracket framing (lleam, tee, angle, charmel or flat sections) including distance pieces, cleats etc. conforming to IS 1161-1979 grade Fe 410W (Gde E-250) quality A complete all as specified and directed.

S & F grills and gratings etc framed angle iron and ms sheets etc and guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and milar work confirming to FE 290 GdeE165 complete all as specified and directed.

S&F wire brush with aluminium section 25mm x 1 mm and brooms to fill the gap of floor and door shutter complete all as directed.

S&F in repairs Harrison rails, Stainless steel, chromium plated with fixing brackets etc complete all as specified and directed.

S&F in repairs braket brass chromium plated for fixing of Harrison rails, mild steel, chromium plated complete all as specified and directed.

Dismantling wall and ceiling boards ( Fiber, pulp, insulation etc) or insulation boards, slabs, blankets or of any description in any thickness including cover fillets complete all as specified and directed.

Material and labour 4mm thick for Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and as directed. (Noted: Grid shall be measured seprately)

M&L for Gl powder coated snap grid frame work for flase ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4mm Gl supended wire of suitable length and butter fly clip of size of main Tee shall be 32mmx 15mm x 0.30mm, cross Tee shall be 32mm x 15mm x 0.30mm thick and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and as directed.

Refexing of non-asbestos designer fiber cement building boards of size 595x595x4mm fixed or laid/inserted to GI frame work with screws/clips as in ceiling laid flat or sloping as directed. complete all as specified and directed.

M&L in repairs for POP board false ceiling multi level 12/12.5mm thick fixed in galvanized grid work as required quanity as site with 25mm long self drilling and tapping screw acing phillips head with under end outer at 200mm centre to centre, including finishing to joint of face board with specially formulated jointing compound including GI suspenders of 6mm thick and joints of ceiling board shall be finsihed 48 mm wide fibre tape to provide eseam less finish etc, M&L for preparing POP false ceiling and applying two coat of luster paint over coat of primer as per recommended by manufacture etc, complete all as specified and directed.

M&L in repairs for 12 mm thick designer water proof PVC MDF Jalli fixed in frame complete all as specified and directed. ( Frame measured seprately)

S&F 5 to 7mm hollow, PVC false ceiling decoratie type fixing at site with GI grid frame work as per manufacture instruction complete all as sepcified.

M&L for 5 to 7mm hollow, PVC Wall panelling any colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L for preparation New steel and iron surface not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Dismantling of unserviceable floor, hearth or wall tiling incld cement mortar bedding (but not backing) and removal of rubbish/ debris from premises of MOD Land complete all a specified and directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:6 as specified and directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:6 as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement plaster of any description including racking out joints hacking for key, scrubbing down with water etc.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished fair and even all as specified and directed.

M&L Preparation new plastered surfaces of walls and applying two coats of cement base paint all as specified and directed.

S&F factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30 mm thick (Stiles) with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per drewing shown on SSR complete all as specified and directed.

S&F factory made solid panel PVC door partly wired and partly panelled shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S. tube shall be covered with heat moulded plain colour PVC 'C' chanels having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour pvc sheet for top rail, panelling of wood grain colour pvc sheet to be fitted in the M.S. framed welded/ sealed to the stliles & rails with suitable PVC sheet beading, and joined the together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 85,373.13]

M/s Rahul Traders

Devika Constructions

AK CONSTRUCTION

dhanshree enterprises

Bidder Name

dhanshree enterprises

khushal constructions

M/s Rahul Traders

Devika Constructions

AK CONSTRUCTION