Construction of 11/0.4 K.V. SuB Station (400 K.V.A. Transformer) at Wazeerbagh in the area of E.U.D.S.D.-Noorbari and Increasing capacity of 400 K.V.A. Transformer in to 630 K.V.A.Transformer at Mallpur Gaon in the area of E.U.D.S.D UPTRON LESA CIS

Amount

Safe carriage, loading and unloading of following material from ESC Daliganj, Lucknow to work site/J.E. dump store.

11/0.4 K.V. 400 K.V.A. Transformer.

11/0.4 K.V. 630 K.V.A. Transformer.

11 K.V. PCC Pole 8.5 Mtr. long.

11 K.V. XLPE cable size 3X70 Sq.mm.

ABC 3X120 Sq.mm.

11 K.V. Out door Jointing kit 3X70 Sq.mm.

Stay set 16X1800 mm.

PVC Cable 1X400 & 1X630 Sq.mm.

ACSR Dog Conductor.

Tail Less Unit

Pin Insulator with Pin

Fabrication, Erection of Double Pole Structure on 8.5 mtr. long PCC with necessary clamps, accessories required including fixing of Top Channel 125X65X6 mm. (2240 mm long) 01 nos., Dropper Channel 100X50 mm. (2028 mm long) 01 nos. with arrangment of fixing of 06 nos. 11 K.V. Pin Insulators. Cross Bracing set of MS Angle 01 Nos. Grouting of 02 Nos of STP with cement, sand and brick ballast in ratio 1:4:8 (2X0.9 Cu.Mtr) and making plinth upto the height of 300 mm from ground. Painting of poles with primer and enamel paint as per RESPO specification complete in all respect. Providing Danger board, Name plate & Barbed wire. Earthing of both the poles.

Dragging of P.C.C. Pole to pit site, digging of pit erection and grouting (as per RESPO norms) of 11 K.V. 9/11/8.5 mtr. Long P.C.C. pole with fixing of necessary items, such as V-type X-arm, F-Bracket, 11 K.V. Pin/Disc insulator, guarding angle (1.8 mm. 65X65X6 mm.) with nuts & bolts its ramming as per RESPO specification. Only pole & insulator shall be supplied by the department.

Construction of masonary type plinth suitable for 400 KVA Transformer of size 2X2X1.5 Mtrs with complete civil material & 02 Nos.,125X65 mm, M.S Channel 2.0 Mtr. long and M.S Twisted Bar size 30 mm complete in all respect as per RESPO norms.

Fabrication and erection of wire mesh fencing 02 Mtr. height with a gate and with retaining wall including grouting of fabricated M.S. Angle 65X65X6 mm. support (05 Nos. in a Sub-Station). Painting of fencing/support with all material as per specification/drawing complete in all respect.

Disconnection of existing 400 KVA Transformer from system shifted upto safe place to the nearest 33/11 K.V. Sub-Station of Division or required place.

Placement of 400 K.V.A. Transformer on plinth, making LT & HT side conections by fixing of Lugs, L-pieces and other materials required for completion of work including carriage of Transformer from store to site.

Placement of 630 K.V.A. Transformer on plinth, making LT & HT side conections by fixing of Lugs, L-pieces and other materials required for completion of work including carriage of Transformer from store to site.

Earthing of 11/0.4 K.V. Distribution Transformer's body & neutral by way of boring and lowering of ISI marked two nos. G.I pipe 1.5" dia 20 m deep from the ground level with solid cone at the lower end of G.I pipe. One end of G.I strip of size 50X6 mm. will be connected with neutral / body of the Transformer & other end will be clamped & welded with G.I Pipe as per UPPCL norms (All the material will be arranged by contractor at their own cost.)

Construction of masonry type D.P. Box with 02 Nos. 300/500 Amp. tabular fuse unit and M.S. Angle Iron support of size 50X50X6 mm. All the civil and other material required shall be arranged and provided by contractor for completion of job as per RESPO norms along with necessary laying of cable and making its cartage & necessary connections.

AB Conductor Stringing & sagging of 3 phase with necessary clamps, Eye hook, Suspension clamp, A-B type connector etc. on ABC New line as per RESPO specification and direction on E/I. ABC shall be supplied by department.

Grouting and nozzeling of Stay set complete of size 16X1800 mm. with cement, sand, brick-ballast 1:3:6 as per RESPO specification.

Laying of 11 K.V., 3X70 mm2 XLPE Cable in trench including all civil material like brick, sand etc. as per latest I.S.S. (normal soil)

Stringing & sagging of 3 phase 3 wire 11 K.V. New line on ACSR DOG conductor as per RESPO specification and direction on E/I . Conductor shall be supplied by department.

Lay down the LT PVC cable of different sizes for making the both side, connection of Transformer after fixing the necessary clamps Lugs and other material required for completion of work including carriage from store center.

Supply and fixing of following material -

Aluminium Lug 400 mm.

Aluminium Lug 630 mm.

Copper 'L' Piece for 630 K.V.A. Transformer.

1 Material supplied by Department - Transformer 400 & 630 K.V.A., P.C.C., LT PVC Cable, Outdoor Jointing kit, Stay set, ABC, XLPE Cable, Stay set, Tailless Fuse Unit, Pin with Pin Insulator etc. 2 Material supplied by Contractor - Civil material, steel sections,Fuse Units,Clamps,Nuts & Bolts & other pettey items required for work. Note :- 1 All the material provided by contractor shall be as per norms of UPPCL/RESPO. 2 One carriage including loading/unloading from dump site to pit site is included in scope of work 3 During execution of work all risk will be of the contractor. 4 Contractor will provide all T & P, vehicle and man power. 5 All the old and used material should be taken on book. 6 The quantity may be vary ±10%.

SINGH ENTERPRISES

sidhvinayak traders