Installation of Octogonal poles At Shamli bypass to vahalna sarovar

Supply and fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70 mm, Bottom dia 130 mm and base plate 12 mm thick) having 3 mm thickness with single arm bracket (1 mtr length) on RCC foundation including the cost of foundation bolts, excavation & back filling and required T&P complete in all respect (S.No. 641).

Supply and fixing of LED Street light fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 watt. Confirming to IP 66 and above protection complete in all respect (S.No. 1423)

Supply and laying of aluminium conductor PVC Insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On Surface the cable run shall be fixed on M.S. clamps etc. of suitable size of as directed by the Engineer-Incharge 16sq mm x 4 core PWD SOR 2017-18 S.No. 501- (i)+ Labour Charges.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/submain wiring/cable as required.

S/F and following Capacity of automatic Street Light cubicle control pannel painted with anticorrosive alkali and acid Proof paint consisting of time switch TSO 100 series with contractors, HRC Fuse, isolating switch metering instrument & instrument box with CTs etc in case of TPN, Complete in all respect 40 A SPN PWD SOR 2017-18 No. 807 (c) II

Supply and burring of sale earthing electrode T – 19 Zn- Zinc coated, length up to 2000 mm outer pipe 48.4 mm x 3.2mm, inner pipe 26.9 mm x 2.6 mm, terminal dia. 12 mm, coating 80-100 micron filled with crystallinc conductive mixture (CCM) having anti corrosive & conductive properly with 50 Kgs. activated soil (BFC) capable of reducing the coil resistivity with good mixture of retaining capacity along with 30 cm squarare C.I. frame with hinged cover & masonary housing. (From electode terminal to switch board, cost of 25x3 G.I. stip will be extra). Make : as approved in U.P. P.W.D. & C.P.R.I. certified. PWD SOR 2017-18 S.I. No. 725-B.

Providing and fixing 25 mm x 5 mm G.I. Stril in 40 mm dia G.I. Pipe from earth electrode including connection with G.I. nut, bolt, spring washer excavation and re- filling etc. as required..

Supplying and laying of following size DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. Conforming to IS 14930, Part II Complete with Fitting and cutting, Jointing etc. Direct in ground (At suitable depth below ground level) etc. Complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal).

Supply and fixing of plain of pin type copper cable socket (Lug) S.No. 504.

Supply and Wiring of submains with two nos. of 2.5 sq. mm. FR PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T & P required for proper completion of the work as directed at site by Engineer in charge. PWD SOR 2014 S.I. No. 289.